Filtration, regulation and treatment of compressed air, Page 2
-
Treatment units; basic units for air
-
Industrial filtration; ISO 8573 - ISO 12500
-
Air dryers; air moisture removal
-
Pressure regulators; precision robust design
-
Cyclone separators; cyclone filtration principle
-
Water-oil separators; separates water from oil
Bestsellers

CHP4A activated carbon filter with G3/4" connection thread designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.005 um....

HFPA activated carbon filter with G3/4" connection thread for use in high corrosive environments. Filtration capacity up to 0.01 um. Maximum working pressure up to 50 bar,...

Adsorption filter with activated carbon for compressed air from Hankison NGF series type CF according to ISO. Filter size F07 with 3/4" female thread connection. The filter is...

Adsorption filter with activated carbon for compressed air from Hankison NGF series type CF according to ISO. Filter size F06 with 3/4" female thread connection. The filter is...

The ADRY-75 Series Adsorption Dryer was designed for continuous separation of water vapor from compressed air at flow rates up to 1,250 l/min. Reduces the pressure dew point...

The AFA2-20V filter insert provides superior breathable air treatment. Filtration provided through activated carbon. Working pressure up to 16 bar, maximum flow rate 2000 l/min.

Removes mechanical contaminants up to 3 um in size according to ISO 8573-1 class 6. Connection with 3/4" internal pipe threads. Designed to allow flow rates up to 1867 l/min....

CHP1P basic filter with G3/4" connection thread designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 3 um. Maximum working...

CHP2P basic filter with G1" connection thread designed for effective removal of solid impurities, oil, water and other impurities from compressed air up to 3 um. Maximum working...

CHP2P basic filter with G3/4" connection thread designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 3 um. Maximum working...

CHP4P basic filter with G3/4" connection thread designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 3 um. Maximum working...

Basic stainless steel filter IHP1N5 with G3/4" connection thread designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 5 um....

Basic stainless steel filter IHP2N5 with G3/4" connection thread designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 5 um....

Basic stainless steel filter IHP4N5 with G3/4" connection thread designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 5 um....

Catalytic filters (hopcalite) AAFH2 in 3/4" design for removal of CO andCO2 to breathable air level according to ISO 8573-1 class 1. Body with easily removable container and...

Removes the coarsest mechanical dirt up to 15 um in size according to ISO 8573-1 class 7. Connection with 3/4" internal pipe threads. Designed to allow flow rates up to 1867...

The extremely quiet and dust-free operation of the compressed air condensation dryer up to a flow rate of 144 m³/hr from the compressor at a 3°C dew point allows for use in...

The extremely quiet and dust-free operation of the compressed air condensation dryer up to a flow rate of 180 m³/hr from the compressor at a 3°C dew point enables use in...

The MDX1200 series condensation dryer with a maximum flow rate of 1,200 l/min and inlet pressure up to 16 bar is used to remove condensate and moisture from compressed air...

The MDX1800 series condensation dryer with a maximum flow rate of 1,825 l/min and inlet pressure up to 16 bar is used to remove condensate and moisture from compressed air...

The MDX400 series condensation dryer with a maximum flow rate of 350 l/min and inlet pressure up to 16 bar is used to remove condensate and moisture from compressed air produced...

The MDX900 series condensation dryer with a maximum flow rate of 850 l/min and an inlet pressure of up to 16 bar is used to remove condensate and moisture from compressed air...

Small condensing dryer for removing moisture from compressed air from the compressor up to a dew point of +5°C. Maximum air flow of 1200 l/min with automatic condensate drainage...

Small condensing dryer for removing moisture from compressed air from the compressor up to a dew point of +5°C. Maximum air flow of 1825 l/min with automatic condensate drainage...

Small condensing dryer for removing moisture from compressed air from the compressor up to a dew point of +5°C. Maximum air flow of 2200 l/min with automatic condensate drainage...

Small condensing dryer for removing moisture from compressed air from the compressor up to a dew point of +5°C. Maximum air flow of 600 l/min with automatic condensate drainage...

Small condensing dryer for removing moisture from compressed air from the compressor up to a dew point of +5°C. Maximum air flow 850 l/min with automatic condensate drainage via...

Cyclone separator HFC-010 with 3/4" threaded connection. It enables inexpensive and effective removal of water and impurities from compressed air. Working pressure 50 bar,...

The TACM-105 small dry separator is designed to separate oil vapours from compressed air using activated carbon from the compressor up to a flow rate of 1,950 l/min at a maximum...

The TACM-56 small dry separator is designed to separate oil vapours from compressed air using activated carbon from the compressor up to a flow rate of 1,250 l/min at a maximum...

The TACM-70 small dry separator is designed to separate oil vapours from compressed air using activated carbon from the compressor up to a flow rate of 1,250 l/min at a maximum...

Removes mechanical contaminants up to 1 um in size according to ISO 8573-1 class 3. Connection with 3/4" internal pipe threads. The design allows a flow rate of up to 1867...

Dust filter CHP1R with G3/4" connection thread designed to effectively remove dust, oil, water and other impurities from compressed air up to 1 um. Maximum working pressure up...

Dust filter CHP2R with G3/4" connection thread designed to effectively remove dust, oil, water and other impurities from compressed air up to 1 um. Maximum working pressure up...

Dust filter CHP4R with G3/4" connection thread designed to effectively remove dust, oil, water and other impurities from compressed air up to 1 um. Maximum working pressure up...

The filter insert AFSM-0106 designed for application in industrial painting, eliminates impurities that deteriorate the quality of the paint. Filtration capacity 0,1 um, maximum...

Filter cartridge for medical vacuum filter MVAC-0106V . Applications mainly in medical devices. Working pressure 20 to 2000 mbar, maximum flow up to 250 l/min.

Filter insert for PVACM vacuum microfilter designed to protect vacuum pumps and vacuum pumps from solid impurities. Filtration capacity up to 0.01 um. Working pressure 20 to...

Replacement cyclone separator body HFC-010 with threaded connection G3/4". It enables inexpensive and effective removal of water and impurities from compressed air. Working...

Replacement filter element CHPC-010V for cyclone separator CHP. It enables inexpensive and efficient removal of water and impurities from compressed air. Working pressure up to...