Filtration, regulation and treatment of compressed air, Page 4
- Treatment units; basic units for air
- Industrial filtration; ISO 8573 - ISO 12500
- Air dryers; air moisture removal
- Pressure regulators; precision robust design
- Cyclone separators; cyclone filtration principle
- Water-oil separators; separates water from oil
Bestsellers
Activated carbon filter CHP2A with G3/4" connection thread designed for effective removal of solid impurities, oil, water and other impurities from compressed air up to 0.01 um....
The CHPA filter insert is used to remove mechanical impurities from compressed air. Borosilicate microfibre insert with a filtration capacity of up to 0.01 μm. Operating...
The filter insert IHPR-010V is used to remove dusty mechanical impurities from compressed air. Filtration capacity up to 1 um. Operating temperature from +1.5 to +65 °C.
Microfilter for compressed air from Hankison NGF series UF type according to ISO. Filter size F06 with 3/4" female thread connection. The filter is equipped with a clogging...
Vacuum microfilter PVACM with G3/4" connection thread for protection of vacuum pumps and vacuum pumps against solid impurities. Filtration capacity up to 0.01 um. Working...
The TACM-105 small dry separator is designed to separate oil vapours from compressed air using activated carbon from the compressor up to a flow rate of 1,950 l/min at a maximum...
The TACM-56 small dry separator is designed to separate oil vapours from compressed air using activated carbon from the compressor up to a flow rate of 1,250 l/min at a maximum...
The TACM-70 small dry separator is designed to separate oil vapours from compressed air using activated carbon from the compressor up to a flow rate of 1,250 l/min at a maximum...
Capsule filter with AAFMS2 molecular sieve in 3/4" design designed as a fuse against moisture leakage into the air during shutdown of adsorption dryers according to ISO 8573-1...
Cyclone separator CKLC with threaded connection G 3/4". It enables inexpensive and effective removal of water and impurities from compressed air. Working pressure 20 bar,...
The MDX1200 series condensation dryer with a maximum flow rate of 1,200 l/min and inlet pressure up to 16 bar is used to remove condensate and moisture from compressed air...
Filter support for MDX400 to 1800 condensation dryers for easy installation of filters without the need for expensive fittings. Easy assembly when installing the dryer. The...
Replacement cyclone separator body CKLHF with threaded connection G3/4". It enables inexpensive and effective removal of water and impurities from compressed air. Working...
Cyclone separator CKLCHP2 with 3/4" threaded connection. It enables inexpensive and effective removal of water and impurities from compressed air. Working pressure 400 bar,...
Small condensing dryer for removing moisture from compressed air from the compressor up to a dew point of +5°C. Maximum air flow 850 l/min with automatic condensate drainage via...
Small condensing dryer for removing moisture from compressed air from the compressor up to a dew point of +5°C. Maximum air flow of 1825 l/min with automatic condensate drainage...
Small condensing dryer for removing moisture from compressed air from the compressor up to a dew point of +5°C. Maximum air flow of 2200 l/min with automatic condensate drainage...
Small condensing dryer for removing moisture from compressed air from the compressor up to a dew point of +5°C. Maximum air flow of 600 l/min with automatic condensate drainage...
The ADRY-75 Series Adsorption Dryer was designed for continuous separation of water vapor from compressed air at flow rates up to 1,250 l/min. Reduces the pressure dew point...
The CHPM filter insert is used to remove mechanical impurities from compressed air. Borosilicate microfibre insert with a filtration capacity of up to 0.1 μm. Operating...
The MDX900 series condensation dryer with a maximum flow rate of 850 l/min and an inlet pressure of up to 16 bar is used to remove condensate and moisture from compressed air...
Filter insert for PVACM vacuum microfilter designed to protect vacuum pumps and vacuum pumps from solid impurities. Filtration capacity up to 0.01 um. Working pressure 20 to...
The MDX400 series condensation dryer with a maximum flow rate of 350 l/min and inlet pressure up to 16 bar is used to remove condensate and moisture from compressed air produced...
AAFB coarse filter in 3/4" design to remove the largest mechanical impurities up to 15 um from compressed air according to ISO 8573-1 class 7. Body with easily removable...
AAFM pre-filter in 3/4" design for removal of fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed...