Filtration, regulation and treatment of compressed air, Page 18
-hankison-susicka-vzduch-kompresor-tllak-kondenzace-rosny-bod.jpg)
Product sorting
List of products
PPA-307 modular filtration system for clean air supply with pre-set air dryer in ductwork. Concept combining microfilter, activated carbon, pressure regulator and 2 quick...
Modular filtration system PPA-307C for clean air supply without air dryer in the ducts. Concept combining cyclone separator, pre-filter, microfilter, pressure regulator and 2...
The filters are used to remove the smallest mechanical impurities from compressed air up to 1 um according to ISO 8573-1 class 3. Connection by flange with DN80 clearance....
The filters are used to remove the smallest mechanical impurities from compressed air up to 1 um according to ISO 8573-1 class 3. Connection by flange with DN100 clearance. The...
The filters are used to remove the largest mechanical impurities from compressed air up to 15 um according to ISO 8573-1 class 7. Connection by flange with DN80 clearance....
The filters are used to remove the largest mechanical impurities from compressed air up to 15 um according to ISO 8573-1 class 7. Connection by flange with DN150 clearance....
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.01 um and oil according to ISO 8573-1 class 1. Connection by flange with DN80...
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.01 um and oil according to ISO 8573-1 class 1. Connection by flange with DN100...
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.01 um and oil according to ISO 8573-1 class 1. Connection by flange with DN125...
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.01 um and oil according to ISO 8573-1 class 1. Connection by flange with DN150...
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.01 um and oil according to ISO 8573-1 class 1. Connection by flange with DN80...
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.01 um and oil according to ISO 8573-1 class 1. Connection by flange with DN100...
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.01 um and oil according to ISO 8573-1 class 1. Connection by flange with DN125...
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.01 um and oil according to ISO 8573-1 class 1. Connection by flange with DN150...
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.1 um and oil according to ISO 8573-1 class 2. Connection by flange with DN80...
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.1 um and oil according to ISO 8573-1 class 2. Connection by flange with DN100...
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.1 um and oil according to ISO 8573-1 class 2. Connection by flange with DN125...
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.1 um and oil according to ISO 8573-1 class 2. Connection by flange with DN150...
The filters are used to remove mechanical impurities from compressed air up to 3 um according to ISO 8573-1 class 6. Connection by flange with DN80 clearance. Designed for flow...
The filters are used to remove mechanical impurities from compressed air up to 3 um according to ISO 8573-1 class 6. Connection by flange with DN100 clearance. The design allows...
FUTURA Treatment Units - Hub Modules, Designed for compressed air and neutral gases, Design ATEX II 2G2D, Operating temperature -10°C to +50°C, Materials : body - Grivory...
FUTURA treatment units - check valves, Designed for compressed air and neutral gases, Design ATEX II 2G2D, Operating temperature -10°C to +50°C, Materials : body - Grivory...
FUTURA treatment units - check valves, Designed for compressed air and neutral gases, Design ATEX II 2G2D, Operating temperature -10°C to +50°C, Materials : body - Grivory...
FUTURA Treatment Units - Hub Modules, Designed for compressed air and neutral gases, Design ATEX II 2G2D, Operating temperature -10°C to +50°C, Materials : body - Grivory...
FUTURA treatment units - check valves, Designed for compressed air and neutral gases, Design ATEX II 2G2D, Operating temperature -10°C to +50°C, Materials : body - Grivory...
FUTURA treatment units - check valves, Designed for compressed air and neutral gases, Design ATEX II 2G2D, Operating temperature -10°C to +50°C, Materials : body - Grivory...
The IEDC electronic skimmers with alarm output for remote monitoring and with the possibility of service connection for obtaining operating data from the device are primarily...
SPFM microfilter with G3/8" connection thread for high efficiency filtration of compressed air, process air and industrial gases. Filtration capacity up to 0.01 um. Maximum...
0.01 um compressed air microfilter with 1" connection for compressed air and neutral gases with a flow rate of 1,400 l/min. Design according to ATEX II 2G2D. Maximum inlet...
0.01 um compressed air microfilter with 3/8" connection for compressed air and neutral gases with a flow rate of 300 l/min. Design according to ATEX II 2G2D. Maximum inlet...
0.01 um compressed air microfilter with 3/8" connection for compressed air and neutral gases with a flow rate of 450 l/min. Design according to ATEX II 2G2D. Maximum inlet...
Microfilter for compressed air from Hankison NGF series UF type according to ISO. Filter size F11 with 1 1/2" female threads. The filter is equipped with a clogging indicator...
Microfilter for compressed air from Hankison NGF series UF type according to ISO. Filter size F10 with 1 1/2" female threads. The filter is equipped with a clogging indicator...
Microfilter for compressed air from Hankison NGF series UF type according to ISO. Filter size F04 with 1/2" female thread connection. The filter is equipped with a clogging...
Microfilter for compressed air from Hankison NGF series UF type according to ISO. Filter size F12 with 2" internal thread connection. The filter is equipped with a clogging...
Microfilter for compressed air from Hankison NGF series UF type according to ISO. Filter size F07 with 3/4" female thread connection. The filter is equipped with a clogging...
Microfilter for compressed air from Hankison NGF series UF type according to ISO. Filter size F06 with 3/4" female thread connection. The filter is equipped with a clogging...
Microfilter for compressed air from Hankison NGF series UF type according to ISO. Filter size F03 with 3/8" female threads. The filter is equipped with a clogging indicator and...
PFM microfilter with G1 1/2" connection thread for use in areas with high corrosive environments. Filtration capacity up to 0.1 um. Maximum working pressure is 16 bar, maximum...
PFM microfilter with G1 1/4" connection thread for use in areas with high corrosive environments. Filtration capacity up to 0.1 um. Maximum working pressure is 16 bar, maximum...