Filtration, regulation and treatment of compressed air, Page 5
-
Treatment units; basic units for air
-
Industrial filtration; ISO 8573 - ISO 12500
-
Air dryers; air moisture removal
-
Pressure regulators; precision robust design
-
Cyclone separators; cyclone filtration principle
-
Water-oil separators; separates water from oil
Bestsellers

The ADRY-105 Series Adsorption Dryer was designed for continuous separation of water vapor from compressed air at flow rates up to 1,750 l/min. Reduces the pressure dew point...

Air pressure regulator with metal filter up to 18 bar. Compressed air control with 850 l/min flow rate in 1 thread 1/4" size. Regulation range 0 - 12 bar. Filtration capacity 20...

Compressed air treatment unit in metal design up to 18 bar. Lubricating grease fitting in 1/2" size with a flow rate of up to 4,300 l/min for compressed air lubrication of e.g....

The extremely quiet and dust-free operation of the compressed air condensation dryer up to a flow rate of 72 m³/hr from the compressor at a 3°C dew point enables use in...

Compressed air treatment units in metal design up to 18 bar. Compressed air control with a flow rate of 2,500 l/min in 3/8" size. Application mainly in industry, laboratory,...

The ADRY-24 series adsorption dryer was designed for continuous separation of water vapour from compressed air at flow rates up to 400 l/min. Reduces the pressure dew point down...

The extremely quiet and dust-free operation of the compressed air condensation dryer up to a flow rate of 54 m³/hr from the compressor at a 3°C dew point enables use in...

AAFC cyclone separator in 1 1/2" design with a flow rate of 8,500 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the...

Pilot air pressure regulator in metal design up to 18 bar. Remote compressed air control with a flow rate of 4,500 l/min in size 2 1/2" thread. Regulation range 0 - 12 bar....

Replacement cyclone insert for liquid water filtration AAFC-1000V. Recommended replacement 12 months or every 4,000 MH and upon indication of clogging of the filter element by...

Pressure regulator with 5 um air filtration for compressed air with or without oil and for neutral gases up to 16 bar. Design according to ATEX II 2G2D. The adjusting pin can be...

B2FD float release. Allows automatic condensate discharge from the filter. Udesigned for all filter sizes from the B2F and BF2M series.Pconnection via a 6 mm hose barb.

Accessories and spare parts for METAL WORK air treatment units. Replacement filter insert 5 um for filter size 1/4" as replacement insert for FDM and FWA air filters.

Hankison filter cartridge for HF series air filter type F02. The filter insert is suitable for easy replacement by means of a thread in the filter. The maximum pressure of the...

Accessories and spare parts for METAL WORK air treatment units. Replacement filter insert 20 um for filter size 3/8"-1/2" as replacement insert for FDM and FWA air filters.

The extremely quiet and dust-free operation of the compressed air condensation dryer up to a flow rate of 25 m³/hr from the compressor at a 3°C dew point enables use in...

Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...

Replacement cartridge WOS-4A for water-oil separators. Active carbon filtration. Residual oil less than 10 ppm. The maximum flow rate is 4000 l/min.

Replacement cartridge WOS-4P for water-oil separators. Filtration via PP filter insert. Residual oil less than 10 ppm. The maximum flow rate is 4000 l/min.

Kit for wall mounting and connecting filters. The set consists of two angles that are attached to the edges of the filter and allow subsequent mounting on the wall. Connecting...

Hub module size 3 air handling units - B2 allow air sampling with certain parameters within the modular series. Tapping outlet via 4 x 1/2" thread. Mthe possibility of taking...

Air pressure regulator with metal filter up to 18 bar. Compressed air control with a flow rate of 4,600 l/min in size 3 3/4" thread. Regulation range 0 - 12 bar. Filtration...

Complete unit in metal design up to 18 bar. Regulation, filtration, lubrication of compressed air with a flow rate of 700 l/min in size 1 with 1/4" thread. Regulation range 0 -...

Air pressure regulator with metal filter up to 18 bar. Compressed air control with a flow rate of 4,600 l/min in size 3 thread 1". Regulation range 0 - 12 bar. Filtration...

Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...

Compressed air treatment unit in metal design up to 18 bar. Lubricator in 1/4" size with a flow rate of up to 1100 l/min for compressed air lubrication of e.g. pneumatic tools....

AAFR dust filter in 3/8" design to remove dust impurities up to 1 um from compressed air according to ISO 8573-1 class 3. Body with easily removable container and designed for a...

Condensing compressed air dryer for dew point +5°C. The maximum inlet pressure is 13 bar with a flow rate of up to 100 m³/hr (1,666 l/min) and connection via a G 1" male thread....

AAFS 1/4" microfilter for removal of micro impurities up to 0.01 um from compressed air according to ISO 8573-1 class 1. Body with easily removable container and designed for a...

Compressed air treatment units in metal design up to 18 bar. Compressed air control with a flow rate of 2,500 l/min in 3/8" size. Application mainly in industry, laboratory,...

Hankison filter cartridge for the PF series air filter type F04. The filter insert is suitable for easy replacement by means of a thread in the filter. The maximum pressure of...

Metal filter for filtration of compressed air from a compressor at 20 um to 18 bar with a maximum flow rate of 11,000 l/min. Connection 1" pipe thread. Possibility to change the...

AAFC cyclone separator in 3/4" design with a flow rate of 2,000 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the...

Mounting angle for air handling units A2R-38, A2S-38. Attachment by means of a lock nut on the pressure regulator.

Accessories and spare parts for METAL WORK air treatment units. Replacement filter insert 20 um for filter size 1/4" as replacement insert for FDM and FWA air filters.

Replacement cartridge WOSM-1AP for water-oil separators. Combined filtration with activated carbon and PP cartridge. Residual oil less than 20 ppm. The maximum flow rate is 1000...

Compressed air treatment units in metal design up to 18 bar. Lubricator in 1" size with a flow rate of up to 16,000 l/min for compressed air lubrication of e.g. pneumatic tools....

Replacement cartridge WOS-8P for water-oil separators. Filtration via PP filter insert. Residual oil less than 10 ppm. The maximum flow rate is 8000 l/min.

High-flow silencer with external pipe thread G 1" designed especially for compressed air expansion during regeneration and ventilation of adsorption dryer production columns....

Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...