Filtration, regulation and treatment of compressed air, Page 17
-
Treatment units; basic units for air
-
Industrial filtration; ISO 8573 - ISO 12500
-
Air dryers; air moisture removal
-
Pressure regulators; precision robust design
-
Cyclone separators; cyclone filtration principle
-
Water-oil separators; separates water from oil
Bestsellers

Complete filter system for breathable air B-AIR PLUS. The system includes a microfilter to remove impurities down to 0.01 um, an activated carbon filter to eliminate oil...

Series of AISI316 stainless steel treatment units designed primarily for industrial applications in sectors such as food, chemical and petrochemical industries and laboratory...

MADRY-6 membrane dryer with compressed air flow up to 6 m³/hr up to 12 bar. Including 2 filters through the dryer and filter cartridge clogging indication. Designed to supply...

Series of AISI316 stainless steel treatment units designed primarily for industrial applications in sectors such as food, chemical and petrochemical industries and laboratory...

Series of AISI316 stainless steel treatment units designed primarily for industrial applications in sectors such as food, chemical and petrochemical industries and laboratory...

Magnetic differential pressure gauge VPG60 for indication of filter cartridge blockage in vacuum systems with electric by contact. Designed for mounting from the top of the...

Series of AISI316 stainless steel treatment units designed primarily for industrial applications in sectors such as food, chemical and petrochemical industries and laboratory...

Magnetic differential pressure gauge VPG60 for indication of filter cartridge blockage in vacuum systems in basic version. Designed for mounting from the top of the filters for...

Series of AISI316 stainless steel treatment units designed primarily for industrial applications in sectors such as food, chemical and petrochemical industries and laboratory...

precision compressed air pressure regulator DRF31-3GS with a flow rate of 540 l/min. Control range 0.2 to 6 bar. Inlet pressure up to 16 bar and connection via 1/4" thread....

The MDX600 series condensation dryer with a maximum flow rate of 600 l/min and an inlet pressure of up to 16 bar is used to remove condensate and moisture from compressed air...

Condensing compressed air dryer for dew point +5°C. The maximum inlet pressure is 13 bar with a flow rate of up to 180 m³/hr (3,000 l/min) and connection via a G 1" male thread....

Replacement dust filter cartridge with 1 µm filtration capacity for OMEGA AIR AAFR-78 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the filter...

Replacement container for FUTURA FA filters in size 4 without condensate drain. The activated carbon in the filter only absorbs aerosols. When the liner becomes clogged, it...

Pressure regulator with 5 um air filtration for compressed air with or without oil and for neutral gases up to 16 bar. Design according to ATEX II 2G2D. The adjusting pin can be...

Filter cartridge for medical vacuum filter MVAC-0006. Applications mainly in medical devices. Working pressure 20 to 2000 mbar, maximum flow up to 60 l/min.

Filter cartridge for medical vacuum filter MVAC-0016. Applications mainly in medical devices. Working pressure 20 to 2000 mbar, maximum flow up to 36 l/min.

dRI air pressure regulator for remote control. Connection thread 1/2" with flow rate up to 6,000 l/min and inlet pressure up to 25 bar. Control by external pilot pressure...

The IEDC electronic skimmers with alarm output for remote monitoring and with the possibility of service connection for obtaining operating data from the device are primarily...

Small condensing dryer for removing moisture from compressed air from the compressor up to a dew point of +5°C. Maximum air flow of 350 l/min with automatic condensate drainage...

AAFM pre-filter in 3" design for removal of fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed...

AAFMS2 1 1/2" molecular sieve capsule filter designed to prevent moisture leakage into the air during shutdown of adsorption dryers according to ISO 8573-1 class 1. Body with...

AAFMS2 1 1/2" molecular sieve capsule filter designed to prevent moisture leakage into the air during shutdown of adsorption dryers according to ISO 8573-1 class 1. Body with...

Absorption filter with 0.005 um activated carbon, 1" connection, for compressed air and neutral gases with a flow rate of 3,500 l/min. Design according to ATEX II 2G2D. Maximum...

Removes mechanical dirt up to 0.01 um and oil according to ISO 8573-1 class 1. Connection by internal pipe threads 1". The design allows a flow rate of up to 3400 l/min. Special...

Removes mechanical dirt up to 0.01 um and oil according to ISO 8573-1 class 1. Connection by internal pipe threads 1/2". The design allows a flow rate of up to 1187 l/min....

Removes mechanical dirt up to 0.01 um and oil according to ISO 8573-1 class 1. Connection with 2" internal pipe threads. The design allows a flow rate of up to 13,317 l/min....

Removes mechanical dirt up to 0.01 um and oil according to ISO 8573-1 class 1. Connection with 2" internal pipe threads. The design allows a flow rate of up to 8233 l/min....

Removes mechanical dirt up to 0.01 um and oil according to ISO 8573-1 class 1. Connection with 3/4" internal pipe threads. The design allows a flow rate of up to 1867 l/min....

HFPA activated carbon filter with G1 1/2" connection thread for use in areas with high corrosive environments. Filtration capacity up to 0.01 um. Maximum working pressure up to...

HFPA activated carbon filter with G1 1/4" connection thread for use in high corrosive environments. Filtration capacity up to 0.01 um. Maximum working pressure up to 50 bar,...

CHP1A activated carbon filter with G1 1/2" connection thread designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.005 um....

CHP1A activated carbon filter with G1 1/4" connection thread designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.005 um....

CHP1A activated carbon filter with G1" connection thread designed for effective removal of solid impurities, oil, water and other impurities from compressed air up to 0.005 um....

CHP1A activated carbon filter with G1/2" connection thread designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.005 um....

CHP1A activated carbon filter with G1/4" connection thread designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.005 um....

CHP1A activated carbon filter with G2" connection thread designed for effective removal of solid impurities, oil, water and other impurities from compressed air up to 0.005 um....

CHP1A activated carbon filter with G3/4" connection thread designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.005 um....

CHP1A activated carbon filter with G3/8" connection thread designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.005 um....

CHP2A activated carbon filter with G1 1/2" connection thread designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.005 um....