Hose clamps for fixing hoses, Page 12
-
Worm buckles W; with pressed strip
-
HTW hose clamps; with high tightening torque
-
DW hose clamps; with perforated band
-
BW endless belts; for individual buckle production
-
Hose clamps QLW; with snap-on house
-
PMW hose clamps; miniature strength design
-
Hose clamps PW; strength design
-
Mounting brackets KW; version with rubber insert
-
Hose clamps SW; wire version
-
Hose clamps PUW; suction hose PUR1
-
Hose clamps FXW;extraction hoses with 0.4 to 0.75 mm wall
-
FXPW hose clamps; suction hoses with wall from 1.45 mm
-
Hose clamps PWD2; strength version with two screws
-
Hose clamps EW; deformation version with eyelets
-
Hose clamps FW; spring design smooth inside
-
EGW hose clamps; deformation version with insert
-
Hose clamps CBW; deformation lock design
-
FBW hose clamps; spring version
-
LPH press rings; low pressure design
-
Hose clamp stands; practical stands
Bestsellers

SW4 90mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...

SW4 60mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...

SW4 65mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...

Hose clamp designed for hose diameters 40-60 mm with easy and quick assembly of the hose clamp thanks to the snap-on house. Stainless steel strip with 9 mm wide continuous...

Deformation hose clamp EWS4 range 23,6 to 26,3 mm with one eyelet and 7 mm wide band. Allows the connection of hoses with small diameters using deformation clamps. Made of W4 -...

Deformation hose clamp EWS4 range 27,2 to 30,7 mm with one eyelet and 7 mm wide strap. Allows the connection of hoses with small diameters using deformation clamps. Made of W4 -...

Mounting bracket KW with a diameter of 25 mm and a tape width of 12 mm. Made of W1 material - white galvanized steel compliant with RoHS directive, rubber insert resistant to...

Mounting bracket KW with a diameter of 28 mm and a tape width of 12 mm. Made of W1 material - white galvanized steel compliant with RoHS directive, rubber insert resistant to...

KW mounting bracket with a diameter of 30 mm and a tape width of 12 mm. Made of W1 material - white galvanized steel compliant with RoHS directive, rubber insert resistant to...

Stainless steel hose clamp for attaching suction hose with right-hand spiral and foil construction in the range of 80-100 mm with 0.4 to 0.75 mm wall. Easy assembly and perfect...

Stainless steel hose clamp for attaching suction hose with right-hand spiral and foil construction in the range of 90-110 mm with 0.4 to 0.75 mm wall. Easy assembly and perfect...

Hose clamp designed for hose diameters 60-425 mm with easy and quick assembly of the hose clamp thanks to the snap-on house. Stainless steel strip with 9 mm wide continuous...

Stainless steel hose clamp for attaching suction hose with right-hand spiral and foil construction in the range of 110-130 mm with 0.4 to 0.75 mm wall. Easy assembly and perfect...

PWD 67 - 75 mm strength hose clamps with two tightening screws located on the hose clamp. High tightening torque for hoses with large diameters. Made of : Stainless steel strip...

Hose clamp designed for hose diameters 60-660 mm with easy and quick assembly of the hose clamp thanks to the snap-on house. Stainless steel strip with 9 mm wide continuous...

Strength hose clamp SW4 208mm fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...

SW4 125mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...

Hose clamp SW4 130mm fitted with two tightening screws on a hose clamp. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber hoses,...

Hose clamp SW4 150mm fitted with two tightening screws on a hose clamp. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber hoses,...

SW4 160mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...

Hose clamp SW4 165mm fitted with two tightening screws on a hose clamp. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber hoses,...

SW4 170mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...

Hose clamp for attaching suction hoses with smooth construction, 100 mm diameter with wall from 1.45 mm. Easy assembly and perfect sealing thanks to the bridging element over...

Hose clamp for attaching suction hoses with smooth construction with a diameter of 300 mm and a wall from 1.45 mm. Easy assembly and perfect sealing thanks to the bridging...

Hose clamp for attaching the suction hose with a smooth construction with a diameter of 400 mm and a wall from 1.45 mm. Easy assembly and perfect sealing thanks to the bridging...

Hose clamp for attaching suction hoses with smooth construction with a diameter of 300 mm and a wall from 1.45 mm. Easy assembly and perfect sealing thanks to the bridging...

Hose clamp for attaching the suction hose with a smooth construction with a diameter of 400 mm and a wall from 1.45 mm. Easy assembly and perfect sealing thanks to the bridging...

Hose clamp for attaching suction hose with right-hand spiral and foil construction in the range 500-520 mm with 0.4 to 0.75 mm wall. Easy assembly and perfect sealing thanks to...