Proceed to cart
Customer support:311 532 091info@kompresory-vzduchotechnika.cz
    Currency
    CZK
    Language
    English
    Home / Hoses / Pressure hoses with braid; air - oil - gases / RWC cooling hoses; for the plastics industry / RWC hose for cooling water red - 19/13 mm

    RWC hose for cooling water red - 19/13 mm

    Code: RWCR-13 RWCR-13-R50 Choose variant
    Not rated
    65 Kč 2 327 Kč from 65 Kč –3 %
    rwc hadice chladici kapalina plast prumysl
    65 Kč 2 327 Kč from 65 Kč –3 % 63 Kč / m 2 257 Kč / pcs from 63 Kč / m 52 Kč excl. VAT 1 865 Kč excl. VAT from 52 Kč excl. VAT – 45,14 Kč / 1 m –
    Stock (41 m) Stock (2 pcs) Choose variant
    Measuring unit ?
    Chosen variant is not available. Reset selected parameters.
    Delivery to:
    24.04.2025 24.04.2025 Choose variant
    Delivery offer
    Plastic red hoses for cooling water for injection moulds in blue version with a diameter of 19/13 mm. Double-layered design made of soft PVC, reinforced with a textile braid made of high strength polyester fibre, clear inner soul, coloured outer jacket to indicate water entering and leaving the mould. The operating temperature range is -5/+60°C, short-term possible up to +90°C.

    Detailed information

    Free shipping
    Free shipping
    For purchases over 5,000 CZK
    We guarantee
    We guarantee
    Extended warranty and service
    Discount voucher
    Discount voucher
    For every purchase
    Return of goods within 30 days
    Return of goods within 30 days
    Completely at our expense

    Related products

    Hose clamp screw W1 - 9/27 mm
    Tip
    9 Kč –11 %
    Hose clamp screw W1 - 9/27 mm
    Stock (>1000 pcs)
    7 Kč excl. VAT
    8 Kč

    Worm hose clamps in material finish W1 - galvanized steel with 9 mm wide band for hose range 16-27 mm. Manufactured according to DIN 3016. With house and tightening screw and...

    Code: W1-027
    Worm hose clamp W4 - 9/27 mm
    Tip
    Worm hose clamp W4 - 9/27 mm
    Stock (>1000 pcs)
    14 Kč excl. VAT
    17 Kč

    Screw hose clamps in material finish W4 - stainless steel AISI 304 with 9 mm wide band for hose range 16-27 mm. Manufactured according to DIN 3016. With house and tightening...

    Code: W4-027
    W4 screw hose clamp - 12/27 mm
    Tip
    77 Kč –3 %
    W4 screw hose clamp - 12/27 mm
    Stock (>1000 pcs)
    61 Kč excl. VAT
    74 Kč

    Screw hose clamps in material finish W4 - stainless steel AISI 304 with 12 mm wide band for hose range 16-27 mm. Manufactured according to DIN 3016. With house and tightening...

    Code: W4-12-027
    Worm hose clamp W2 - 12/27 mm
    Tip
    18 Kč –5 %
    Worm hose clamp W2 - 12/27 mm
    Stock (155 pcs)
    14 Kč excl. VAT
    17 Kč

    Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 12 mm band width for hoses with a range of 16-27 mm. Manufactured according to...

    Code: W2-12-027
    Hose clamp screw W1 - 12/27 mm
    Tip
    10 Kč –10 %
    Hose clamp screw W1 - 12/27 mm
    Stock (>1000 pcs)
    7 Kč excl. VAT
    9 Kč

    Worm hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hose range 16-27 mm. Manufactured according to DIN 3016. With house and tightening screw and...

    Code: W1-12-027
    Hose clamp DW4-12 - 16/27 mm
    28 Kč –3 %
    Hose clamp DW4-12 - 16/27 mm
    Stock (559 pcs)
    22 Kč excl. VAT
    27 Kč

    Hose clamps with perforated belt in material finish W4 with a belt width of 12.7 mm in the range of 16-27 mm. According to SAE standard with house and tightening screw and...

    Code: DW4-12-027
    Hose clamp DW4-8 - 16/27 mm
    14 Kč –7 %
    Hose clamp DW4-8 - 16/27 mm
    Stock (410 pcs)
    11 Kč excl. VAT
    13 Kč

    Hose clamps with perforated belt in material finish W4 with a belt width of 8 mm in the range of 16-27 mm. According to SAE standard with house and tightening screw and hexagon...

    Code: DW4-8-027
    dw4 spona hadicova 9mm
    11 Kč –9 %
    Hose clamp DW2-8 - 16/27 mm
    Stock (496 pcs)
    8 Kč excl. VAT
    10 Kč

    DW hose clamps with perforated tape in material finish W2 with a tape width of 8.5 mm and a range of 16-27 mm. House and tightening screw and hexagon SW 6 mm. Stainless steel...

    Code: DW2-8-027
    Hose clamp DW1-8 - 16-27 mm
    Hose clamp DW1-8 - 16-27 mm
    Stock (11 pcs)
    6 Kč excl. VAT
    7 Kč

    DW hose clamps with perforated band in material finish W1 with a band width of 8.5 mm and a range of 16-27 mm. House and tightening screw and hexagon SW 6 mm. Made entirely of...

    Code: DW1-8-027
    HTW spona hadicova 12mm
    Hose clamp screw HTW1 - 15/24 mm
    Stock (135 pcs)
    36 Kč excl. VAT
    44 Kč

    Worm hose clamps with a band width of 12 mm and a range of 15 -24 mm in material version W1 - galvanized steel. Extremely strong one-piece moulded house, rounded edges to reduce...

    Code: HTW1-12-024
    Hose clamp PMW - 20 mm
    16 Kč –6 %
    Hose clamp PMW - 20 mm
    Stock (>1000 pcs)
    12 Kč excl. VAT
    15 Kč

    PMW 20mm hose clamps for small diameter hoses. Fitted with a hinge pin. Made of white galvanized steel. Use in industry and auto repair.

    Code: PMW1-9-20
    pevnostni hadicova spona
    Tip
    30 Kč –3 %
    Hose clamp PW1 - 19 mm
    Stock (982 pcs)
    24 Kč excl. VAT
    29 Kč

    Hose clamp PW1 19 mm with tightening screw on hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with quick assembly...

    Code: PW1-019
    Hose clamp PW4 - 19 mm
    Tip
    107 Kč –4 %
    Hose clamp PW4 - 19 mm
    Stock (120 pcs)
    84 Kč excl. VAT
    102 Kč

    PW4 19mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

    Code: PW4-019
    Hose clamp EWD1 - 21 mm
    Tip
    13 Kč –7 %
    Hose clamp EWD1 - 21 mm
    Stock (>1000 pcs)
    10 Kč excl. VAT
    12 Kč

    Deformation hose coupling EWD1 with a range of 18 to 21 mm. It allows very inexpensive connection of hoses with small diameters. Made of material W1 - white galvanized steel....

    Code: EWD1-21
    ews4 spona hadicova
    23 Kč –4 %
    Hose clamp EWS4 - 21 mm
    Stock (20 pcs)
    18 Kč excl. VAT
    22 Kč

    Deformation hose clamp EWS4 range 18,7 to 21,0 mm with one eyelet and 7 mm wide strap. Allows the connection of hoses with small diameters using deformation clamps. Made of W4 -...

    Code: EWS4-21
    Hose clamp FW1 - 20 mm
    8 Kč –12 %
    Hose clamp FW1 - 20 mm
    Stock (58 pcs)
    6 Kč excl. VAT
    7 Kč

    Deformation hose coupling FW1 with a range of 20 mm with spring effect. Made of W1 material - white galvanized steel, RoHS compliant. For installation when compensating for...

    Code: FW1-20
    Show all related products Previous product Next product

    Product detailed description

    Specially designed hose for the plastics industry - RWCR-13

    • plastic hoses for cooling water for injection moulds
    • double-layer design made of soft PVC, reinforced with a textile braid made of high-strength polyester fibre
    • clear inner tube, blue or red outer shell to indicate water entering and leaving the mould
    • working temperature -5/+60°C, short-term up to +90°C

    Additional parameters

    Category: RWC cooling hoses for the plastics industry
    Pressure: 15 bar
    Barva: Red
    Material: PVC
    Medium: Cooling water
    Temperature: -5/+60 °C
    Outer diameter: 19 mm
    Inner diameter: 13 mm

    Be the first who will post an article to this item!

    Do not fill out this field:

    Be the first who will post an article to this item!

    Do not fill out this field:

    Security check

    Being world-leading, still as a family business

    On an area of almost 28,000 square metres, today there is a company that excels in the production of air and hydraulic hoses and a range of products for the application of pneumatic actuators in industry - Mebra Plastik Italia SpA. As the name suggests, the company's headquarters are located in Busto Arsizio, Italy, where it has taken its products to the top of the world in its field. The company's philosophy is based on family management, which started almost 50 years ago as a family business and continues in this style today, even though three generations have changed the management of Membra Plastik. The close relationship between management and employees, combined with 50 years of experience and modern technology, means that customers can rely on the quality of the products.

    		 membra-plastik-hadice-italie-1
    membra-plastik-hadice-italie-3

    Desire for perfection

    Membra Plastik is now a globally established brand whose products are sought after by large industrial companies as well as in agricultural and workshop environments. However, the brand's popularity is due to many years of developing the most reliable products and deploying strict quality standards. A big plus of hydraulic and pneumatic hoses in particular is their unique technological properties, which in many cases surpass their competitors. In addition, in 2016 Membra Plastik launched a new factory, doubling its productivity.

    The Membra Plastik product range can be found below.