Automation technology - valves and cylinders, Page 15
-
Valves and accessories; pneumatic, electrical, manual
-
Cylinders and accessories; single-acting and double-acting
-
Solenoid valves; electromagnetic valves
-
Suction cups and vacuum technology; switches-valves-screw
-
Ejectors and vacuum pumps; vacuum generators
Bestsellers
List of products
Cables for supplying current to the cylinder position sensors, 2m long. Equipped with a standard M8 connector
Rear forks with CF-type pivot designed for 40 mm diameter ISO 6432 cylinders. Made of steel.
Coils type ASA12 for valves A1 - 1/8", 1/4" and 1/2". 48 V AC version with 4.2 VA and 10 ms response time. We recommend the A12209 connector as coil protection. Coils are not...
P-type foot mounting for cylinders according to ISO 6432 with a diameter of 40 mm. Made of steel.
Blind end plate for ISO1 valve block. Suitable for blanking the plate of ISO1 pneumatic and electro-pneumatic valves.
End plate for ISO1 valve block with 3/8" threads. Suitable for termination of ISO1 pneumatic and electro-pneumatic valve block.
AQIS type PB low feet for cylinder diameter 50 mm. Designed for cylinders according to ISO 15 552 dimensional standard. Made of steel, for applications with higher mechanical...
Coil type ASA2 for ISO valves size ISO1 and ISO2. 110 V AC version with 4.2 VA input and 10 ms response time. We recommend the 18209 connector as coil protection. Coils are not...
single position ISO1 blanking plate for mounting in the block. Suitable for blanking the position of ISO1 pneumatic and electro-pneumatic valve block.
Parallel PPC grippers with a diameter of 16 mm and a stroke of 6 mm. Design with magnet, sensor type ASC. The grippers are equipped with grooves on the body to allow direct...
Parallel PPC grippers with a diameter of 25 mm and a stroke of 14 mm. Design with magnet, sensor type ASC. The grippers are equipped with grooves on the body to allow direct...
Parallel PPC grippers with a diameter of 32 mm and a stroke of 16 mm. Design with magnet, sensor type ASC. The grippers are equipped with grooves on the body to allow direct...
Parallel PPC grippers with a diameter of 20 mm and a stroke of 8 mm. Design with magnet, sensor type ASC. The grippers are equipped with grooves on the body to allow direct...
Solenoid valve A1E with connection threads 1/4" in 5/3 middle position closed with flow rate 1 100 Nl/min and clearance DN 8 mm. Coil ASA12 and connector A12209 are not...
Connector type A12209 for ASA12 spools for A1 valves in 1/8", 1/4" and 1/2" sizes. Connector with LED, transparent, 115 V AC-DC.
Pins type SEC AQCN for cylinder diameter 40 mm. Designed for cylinders according to the CNOMO dimensional standard. Made of steel, for operations with higher mechanical stress...
P-type foot mounting for cylinders according to ISO 6432 with a diameter of 50 mm. Made of steel.
Connector type A12209 for ASA12 spools for A1 valves in 1/8", 1/4" and 1/2" sizes. Connector with LED and 2 m cable, black, 115 V AC-DC.
AZH miniature ejector with 6 mm socket couplings and integrated blow-off. Nozzle diameter 0,5 mm and maximum vacuum 48 -kPa. Designed to create a vacuum in small isolated systems.
Rear forks with pin type CF designed for cylinders according to ISO 6432 with a diameter of 20 to 25 mm. Made of steel.
Blanking of one position for A1B1 base plate for mounting 1/8" A1 valves. Connection 1/8". Suitable for battery mounting of A1 pneumatic and electro-pneumatic valves.
AZH miniature ejector with 10 mm socket couplings and integrated blow-off. Nozzle diameter 1.3 mm and maximum vacuum 48 -kPa. Designed to create a vacuum in small isolated systems.