Automation technology - valves and cylinders, Page 13
- Valves and accessories; pneumatic, electrical, manual
- Cylinders and accessories; single-acting and double-acting
- Solenoid valves; electromagnetic valves
- Safety valves; settings including certification
- Suction cups and vacuum technology; switches-valves-screw
- Ejectors and vacuum pumps; vacuum generators
Bestsellers
Swivel fitting with female thread G1/2", swivel angle +/-12°.
Connection fitting for suction cups with internal thread G1/2". Designed for suction cups: SB110, SF110.
The vacuum switch with 3/2NO function with G1/8" thread converts the vacuum signal into a pneumatic signal. Pressure range 1.5 - 8 bar and vacuum trigger signal in the range of...
Suction cup SBL 50 mm diameter with 4,5 bellows 50 mm diameter. Made of 50°Sh silicone. Designed for transporting fragile items with high security such as eggs, glass, baked...
Articulated sockets for pneumatic cylinder on piston rod according to 8139 and DIN 648-K type RF for 125 mm cylinders with M27 × 2 connection thread. Supplied in galvanized steel.
Solenoid valve A1E with connection threads 1/8" in 5/3 middle position closed, auxiliary pressure supply with flow rate 650 Nl/min and clearance DN 6,5 mm. Coil ASA12 and...
Piston rod fork according to ISO 8140 type FFISO for cylinders 8 - 10 mm with connection thread M4x0,7
P-type foot mounting for cylinders according to ISO 6432 with a diameter of 8 to 10 mm. Made of steel.
Manually operated valve - version 3/2 NC, mushroom, green without locking. Working pressure 0 - 10 bar, working temperature: -10 to +80 °C, materials used: body -...
Cylinder end position sensor with 2.5 m fixed cable connection. Reed relay sensing, for 5-120V AC and DC voltages. Red LED signaling. For direct mounting in cylinder grooves.
Piston rod fork according to ISO 8140 type FFISO for cylinders 12 - 16 mm with M6x1 connection thread
P-type foot mounting for cylinders according to ISO 6432 with a diameter of 32 mm. Made of steel.
Type F face flanges designed for cylinders according to ISO 6432 with a diameter of 8 to 10 mm. Made of steel.
Channel plug for A1B2 valve plate for mounting A1 valves in 1/4" size. Side connection 3/8". Suitable for battery mounting of A1 pneumatic and electro-pneumatic valves.
Pins type SEC AQIS for cylinder diameter 32 mm. Designed for cylinders according to ISO 15 552 dimensional standard. Made of steel, for applications with higher mechanical...
Channel plug for A1B1 valve plate for mounting A1 valves in 1/8" size. Side connection 1/4". Suitable for battery mounting of A1 pneumatic and electro-pneumatic valves.
Pins type SEC AQCN for cylinder diameter 40 mm. Designed for cylinders according to the CNOMO dimensional standard. Made of steel, for operations with higher mechanical stress...
Connection fitting for suction cups with external thread M5. Designed for suction cups: SB10, SB12, SB15, SBL15, SF15, SU10, SU15.
Piston rod fork according to ISO 8140 type FFISO for 20 mm cylinders with connection thread M8x1,25
Coil type ASA12 for A1 1/8", 1/4" and 1/2" valves. 12 V AC version with 4.2 VA and 10 ms response time. We recommend the A12209 connector as coil protection. Coils are not...
Rear forks with pin type CF designed for cylinders according to ISO 6432 with a diameter of 12 to 16 mm. Made of steel.
Solenoid valve A1E with 1/4" connection threads in 5/3 medium position under pressure with flow rate 1 100 Nl/min and DN 8 mm clearance. Coil ASA12 and connector A12209 are not...
Solenoid valve A1E with 1/4" connection threads in 5/3 medium pressure position, auxiliary pressure supply with flow rate 1 100 Nl/min and DN 8 mm clearance. Coil ASA12 and...
Spare set of seals for AMT pneumatic cylinder with diameter 160 mm. The kit is only suitable for resealing the pneumatic cylinder.
Replacement set of AMX pneumatic cylinder seals with a diameter of 100 mm. The kit is only suitable for resealing the pneumatic cylinder.
Rear forks with pin type CF designed for cylinders according to ISO 6432 with a diameter of 50 mm. Made of steel.
Replacement set of AMT pneumatic cylinder seals with a diameter of 200 mm. The kit is only suitable for resealing the pneumatic cylinder.
Replacement set of seals for AMT pneumatic cylinder with diameter 250 mm. The kit is only suitable for resealing the pneumatic cylinder.
Replacement seal set for AMT pneumatic cylinder with diameter 350 mm. The kit is only suitable for resealing the pneumatic cylinder.
Replacement set of AMX pneumatic cylinder seals with diameter 125 mm. The kit is only suitable for resealing the pneumatic cylinder.