Pneumatic cylinders and accessories, Page 10
- Circular cylinders; ISO 6432
- Square cylinders; standard ISO 15 552
- RED circular cylinders; disassembled cylinders
- Profiled cylinders CX and CM; according to CNOMO
- Compact cylinders
- Rodless cylinders
- Threaded cylinders MC
- Short lift cylinders
- Tentacles
- Linear guides for cylinders
- ABS piston rod brakes
- V61 slow-running valves; slow ramp-up
- Vibrators
- position sensors; connecting cables
- Sensor handles; for pneumatic cylinders
- Mounting accessories; cylinder handles and extensions
- Shock absorbers; for end positions
Bestsellers
Three-point PPE grippers with a diameter of 40 mm and a stroke of 8 mm. Design with magnet, sensor type ASC. The grippers are equipped with grooves on the body to allow direct...
Three-point PPE grippers with a diameter of 50 mm and a stroke of 12 mm. Design with magnet, sensor type ASC. The grippers are equipped with grooves on the body to allow...
Three-point PPE grippers with a diameter of 63 mm and a stroke of 16 mm. Design with magnet, sensor type ASC. The grippers are equipped with grooves on the body to allow...
Articulated sockets for pneumatic cylinder on piston rod according to 8139 and DIN 648-K type RF for cylinders 8 - 10 mm with M4 connection thread. Supplied in AISI 316...
Articulated sockets for pneumatic cylinder on piston rod according to 8139 and DIN 648-K type RF for cylinders 160 - 200 mm with connection thread M36 x 2. Supplied in...
Articulated sockets for pneumatic cylinder on piston rod according to 8139 and DIN 648-K type RF for 250 mm cylinders with connection thread M42 x 2. Supplied in galvanized steel.
Articulated sockets for pneumatic cylinder on piston rod according to 8139 and DIN 648-K type RF for 320 mm cylinders with connection thread M48 x 2. Supplied in galvanized steel.
AQIS type PB low feet for 63 mm cylinder diameter. Designed for cylinders according to ISO 15 552 dimensional standard. Made of steel, for applications with higher mechanical...
PB AQUN type low feet for cylinder diameter 20 mm. Designed for cylinders according to the UNITOP dimensional standard. Made of steel, for operations with higher mechanical...
Low foot type PB AQUN for cylinder diameter 25 mm. Designed for cylinders according to the UNITOP dimensional standard. Made of steel, for operations with higher mechanical...
Pins type SEC AQCN for cylinder diameter 63 mm. Designed for cylinders according to the CNOMO dimensional standard. Made of steel, for operations with higher mechanical stress...
Anti-rotation pins type SEC ARAQIS for cylinder diameter 32 mm. Designed for cylinders according to ISO 15 552 dimensional standard. Made of steel, for applications with higher...
Anti-rotation pins type SEC ARAQIS for cylinder diameter 40 mm. Designed for cylinders according to ISO 15 552 dimensional standard. Made of steel, for applications with higher...
Rear lugs type CM ALIS for cylinder diameter 32 mm. Designed for cylinders according to ISO 15 552 dimensional standard. Made of aluminium, application for operation with lower...
Angular axial joint couplings type RBL for cylinders with diameter 50 - 63 mm with connection thread M16x1,5. Supplied in special zinc alloy.
VR roller vibrator with 1690 N force and 1/8" thread. Body made of exolated aluminium, roller and orbit made of hardened steel, cover made of AISI303 stainless steel....
VR roller vibrator with 2910 N force and 1/8" connection thread. Body made of exolated aluminium, roller and orbit made of hardened steel, cover made of AISI303 stainless...
VR roller vibrator with 4740 N force and 1/4" connection thread. Body made of exolated aluminium, roller and orbit made of hardened steel, cover made of AISI303 stainless...
VR roller vibrator with a force of 7850 N and 1/4" connection thread. Body made of exolated aluminium, roller and orbit made of hardened steel, cover made of AISI303 stainless...
VR roller vibrator with 9730 N force and 3/8" connection thread. Body made of exolated aluminium, roller and orbit made of hardened steel, cover made of AISI303 stainless...