Compressed air treatment units
Compressed air produced by a compressor contains mechanical impurities, condensate and oil vapours. Air treatment will ensure that these elements do not damage the equipment connected to your compressor. This extends the life of your pneumatic tools, valves or cylinders and avoids expensive servicing. For local compressed air treatment solutions, we offer a total of eight model series of treatment units to meet the needs of any application. These are not just traditional pressure regulators, filters and oilers, but modern local air treatment solutions that provide your compressor system with so much more! More about treatment units in the sequel.
#ShowMore#
Why choose an air handling unit for air treatment?
Air treatment units are a complete solution by combining three important components - pressure regulator, filter and oiler. All of these elements can be combined into functional assemblies depending on exactly what application you are using compressed air for and how high the demands on the quality of the produced air are.The guideline for compressed air quality is ISO 8573-1. Its quality is described in the standard by seven classes 0 to 6 and each class has a prescribed maximum content of solids, water and oil. Different purity classes are required for different applications and flow rates.
Articles from our advice on air filtration:
In the modular series, we also offer other building components such as shut-off valves, slow start valves, branching modules, filters with higher filtration levels, precision pressure regulators or membrane dryers. With such a wide selection, you're sure to find a product that fits your compressed air end-use needs exactly and perfectly without compromise.
How to choose a treatment unit? For example, according to the release of condensate!
-
P2 treatment units; miniature version up to 12 bar
-
Treatment units A2; basic design up to 10 bar
-
B2 treatment units; metallic design up to 18 bar
-
I3 treatment units; compact design up to 13 bar
-
I8 treatment units; robust design up to 18 bar
-
Futura treatment units; ATEX up to 16 bar
-
Combibloc treatment units; compact up to 16 bar
-
Standard treatment units; high flow design
-
Treatment units A1X; stainless steel AISI316
Bestsellers

Air treatment units A1. Simple compressed air control with AFR pressure regulators with 1/4" air filtration and 750 l/min air flow. Included in the delivery is a pressure gauge...

Air treatment units A1. Simple air filtration at 5 um. Filter design 1/2" with air flow of 5,000 l/min. Semi-automatic condensate discharge in the flask.

Air treatment units A1. Simple compressed air control with pressure regulators with AFR air filtration in 1" design with air flow of 5,500 l/min. Included in the delivery is a...

Air treatment units A1. Simple compressed air control with AFR air filtration pressure regulators in 3/8" design with 2000 l/min air flow. Included in the delivery is a pressure...

Compact regulator with 20 um filtration for compressed air treatment up to 13 bar. Compressed air control from 0 to 8 bar with a maximum flow rate of 600 l/min. Connection...

Metal filter up to 18 bar with 20 µm cartridge for a flow rate of 4 300 l/min in size 2 with 1/2" thread. Application mainly in industry, laboratory, measuring and control...

Metal filter up to 18 bar with 20 µm cartridge for a flow rate of 4 300 l/min in size 2 with 3/8" thread. Application mainly in industry, laboratory, measuring and control...

Air treatment units A1. Simple air filtration at 5 um. Filter design 3/8" with air flow 1 700 l/min. Semi-automatic condensate discharge in the flask.

Compressed air treatment units in metal design up to 18 bar. Compressed air control with 700 l/min flow rate in 1/4" size. Application mainly in industry, laboratory, measuring...

Air treatment units A1. Simple air filtration at 5 um. Filter design 1/4" with air flow 800 l/min. Semi-automatic condensate discharge in the flask.

Complete air treatment units are used wherever compressed air needs to be regulated, filtered and lubricated. With the complete units, we can obtain compressed air treated to 5...

Metal filter up to 18 bar with 20 µm cartridge and flow rate of 1 750 l/min in size 1 with 1/4" thread. Application mainly in industry, laboratory, measuring and control...

Complete air treatment units are used wherever compressed air needs to be regulated, filtered and lubricated. With the complete units, we can obtain compressed air treated to 5...

Compact filter for filtration of compressed air from a 20 um compressor up to 13 bar with a maximum flow rate of 1,200 l/min. Connection internal pipe thread 1/8". Possibility...

Complete unit in metal design up to 18 bar. Regulation, filtration, lubrication of compressed air with a flow rate of 2,500 l/min in size 2 with 3/8" thread. Regulation range 0...

Complete air treatment units are used wherever compressed air needs to be regulated, filtered and lubricated. With the complete units, we can obtain compressed air treated to 5...

Replacement container for FUTURA filters in size 2 with semi-automatic drainage - (manual manual and automatic drainage based on the fullness of the container). Suitable only...

Replacement container for FUTURA filters in size 1 with semi-automatic drainage - (manual manual and automatic drainage based on the fullness of the container). Suitable only...

Compressed air treatment units in metal design up to 18 bar. Compressed air control with a flow rate of 3100 l/min in 1/2" size. Application mainly in industry, laboratory,...

Metal filter up to 18 bar with 20 µm cartridge and flow rate of 11,000 l/min in size 3 with 3/4" thread. Application mainly in industry, laboratory, measuring and control...

Air treatment units A1. Simple air filtration at 5 um. 1" filter design with 7,000 l/min air flow. Semi-automatic condensate discharge in the flask.

Complete unit in metal design up to 18 bar. Regulation, filtration, lubrication of compressed air with a flow rate of 2,500 l/min in size 2 with 1/2" thread. Regulation range 0...

Complete air treatment units are used wherever compressed air needs to be regulated, filtered and lubricated. With the complete units, we get treated compressed air that can be...

Compact filter for filtration of compressed air from a 20 um compressor up to 13 bar with a maximum flow rate of 1,200 l/min. Connection 1/4" pipe thread. Possibility to change...

Air pressure regulator with metal filter up to 18 bar. Compressed air control with 850 l/min flow rate in 1 thread 1/4" size. Regulation range 0 - 12 bar. Filtration capacity 20...

Pressure regulator with 5 um air filtration for compressed air with or without oil and for neutral gases up to 16 bar. Design according to ATEX II 2G2D. The adjusting pin can be...

Air pressure regulator with metal filter up to 18 bar. Compressed air control with a flow rate of 4,600 l/min in size 3 3/4" thread. Regulation range 0 - 12 bar. Filtration...

Complete unit in metal design up to 18 bar. Regulation, filtration, lubrication of compressed air with a flow rate of 700 l/min in size 1 with 1/4" thread. Regulation range 0 -...

Air pressure regulator with metal filter up to 18 bar. Compressed air control with a flow rate of 4,600 l/min in size 3 thread 1". Regulation range 0 - 12 bar. Filtration...

Compressed air treatment units in metal design up to 18 bar. Compressed air control with a flow rate of 2,500 l/min in 3/8" size. Application mainly in industry, laboratory,...

Metal filter for filtration of compressed air from a compressor at 20 um to 18 bar with a maximum flow rate of 11,000 l/min. Connection 1" pipe thread. Possibility to change the...

Compressed air treatment unit in metal design up to 18 bar. Comprehensive treatment in one 1/2" unit with flow rates up to 2,500 l/min. All the benefits of separate parts....

Metal filter up to 18 bar with 20 µm cartridge and flow rate of 11,000 l/min in size 3 with 1" thread. Application mainly in industry, laboratory, measuring and control technology.

Metal filter for filtration of compressed air from a compressor at 20 um to 18 bar with a maximum flow rate of 9,100 l/min. Connection 3/4" pipe thread. Possibility to change...

Microfilter in metal design up to 18 bar with 0.01 µm liner, flow rate 4 300 l/min in size 2 with 3/8" thread atdesigned for very gentle removal of solid dirt, water and oil...

Microfilter in metal design up to 18 bar with 0.01 µm liner, flow rate 4 300 l/min in size 2 with 1/2" thread atdesigned for very gentle removal of solid dirt, water and oil...

Metal filter for filtration of compressed air from a compressor at 20 um to 18 bar with a maximum flow of 3,100 l/min. Connection 3/8" pipe thread. Possibility to change the...

Complete unit in metal design up to 18 bar. Regulation, filtration, lubrication of compressed air with a flow rate of 4,600 l/min in size 3 with 1" thread. Regulation range 0 -...

Compressed air treatment unit in metal design up to 18 bar. Comprehensive treatment in one 3/8" unit with flow rates up to 2,500 l/min. All the benefits of separate parts....

Pressure regulator with 5 um air filtration for compressed air with or without oil and for neutral gases up to 16 bar. Design according to ATEX II 2G2D. The adjusting pin can be...