Compressed air treatment units
Compressed air produced by a compressor contains mechanical impurities, condensate and oil vapours. Air treatment will ensure that these elements do not damage the equipment connected to your compressor. This extends the life of your pneumatic tools, valves or cylinders and avoids expensive servicing. For local compressed air treatment solutions, we offer a total of eight model series of treatment units to meet the needs of any application. These are not just traditional pressure regulators, filters and oilers, but modern local air treatment solutions that provide your compressor system with so much more! More about treatment units in the sequel.
#ShowMore#
Why choose an air handling unit for air treatment?
Air treatment units are a complete solution by combining three important components - pressure regulator, filter and oiler. All of these elements can be combined into functional assemblies depending on exactly what application you are using compressed air for and how high the demands on the quality of the produced air are.The guideline for compressed air quality is ISO 8573-1. Its quality is described in the standard by seven classes 0 to 6 and each class has a prescribed maximum content of solids, water and oil. Different purity classes are required for different applications and flow rates.
Articles from our advice on air filtration:
In the modular series, we also offer other building components such as shut-off valves, slow start valves, branching modules, filters with higher filtration levels, precision pressure regulators or membrane dryers. With such a wide selection, you're sure to find a product that fits your compressed air end-use needs exactly and perfectly without compromise.
How to choose a treatment unit? For example, according to the release of condensate!
-
P2 treatment units; miniature version up to 12 bar
-
Treatment units A2; basic design up to 10 bar
-
B2 treatment units; metallic design up to 18 bar
-
I3 treatment units; compact design up to 13 bar
-
I8 treatment units; robust design up to 18 bar
-
Futura treatment units; ATEX up to 16 bar
-
Combibloc treatment units; compact up to 16 bar
-
Standard treatment units; high flow design
-
Treatment units A1X; stainless steel AISI316
Bestsellers

Lubricator in metal design up to 18 bar with a flow rate of 16,000 l/min in size 3 with 3/4" thread designed for efficient oil mist doses for lubricating pneumatic tools or...

Metal filter up to 18 bar with 20 µm cartridge and flow rate of 11,000 l/min in size 3 with 3/4" thread. Application mainly in industry, laboratory, measuring and control...

Air pressure regulator with metal filter up to 18 bar. Compressed air control with a flow rate of 4,600 l/min in size 3 3/4" thread. Regulation range 0 - 12 bar. Filtration...

Compressed air treatment units in metal design with inlet up to 18 bar. Compressed air control 0 - 12 bar with a flow rate of 4,500 l/min in 1" size. Application mainly in...

Compressed air treatment units in metal design up to 18 bar. Lubricating grease gun in 3/4" size with a flow rate of up to 16,000 l/min for compressed air lubrication of e.g....

Metal filter for filtration of compressed air from a compressor at 20 um to 18 bar with a maximum flow rate of 9,100 l/min. Connection 3/4" pipe thread. Possibility to change...

Air pressure regulator in metal design up to 18 bar. Compressed air control with a flow rate of 4,600 l/min in size 3 3/4" thread. Regulation range 0 - 12 bar. Application...

Complete unit in metal design up to 18 bar. Regulation, filtration, lubrication of compressed air with a flow rate of 4,600 l/min in size 3 with 3/4" thread. Regulation range 0...

Pressure regulator with 5 um air filtration for compressed air with or without oil and for neutral gases up to 16 bar. Design according to ATEX II 2G2D. The adjusting pin can be...

Compressed air treatment units in metal design with inlet up to 18 bar. Compressed air control 0 - 12 bar with a flow rate of 4,500 l/min in 3/4" size. Application mainly in...

Compressed air microfilter 0,01 um with 3/4" connection for compressed air and for neutral gases with flow rate 1 400 l/min. Design according to ATEX II 2G2D. Maximum inlet...

Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...

Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...

Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...

Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...

Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...

Combibloc air treatment units. Unique solution of integrating pressure regulator, filter and oiler in a minimal footprint. Two bay sizes with different threaded connections....

Treatment units consisting of pressure regulator, filter and oiler with a maximum possible flow rate of 6000 l/min in 3/4" size and inlet pressure up to 16 bar. Designed for...

Treatment units consisting of pressure regulator, filter and oiler with a maximum possible flow rate of 6000 l/min in 3/4" size and inlet pressure up to 25 bar. Designed for...

Combibloc air treatment units. Unique solution of integrating pressure regulator, filter and oiler in a minimal footprint. Two bay sizes with different threaded connections....

Combibloc air treatment units. Unique solution of integrating pressure regulator, filter and oiler in a minimal footprint. Two bay sizes with different threaded connections....

Treatment units FUTURA, Shut-off, switching, filling, check valves, Designed for compressed air and for neutral gases, Design ATEX II 2G2D, Operating temperature -10°C to +50°C,...

Absorption filter with 0.005 um activated carbon, 3/4" connection, for compressed air and neutral gases with a flow rate of 3,500 l/min. Design according to ATEX II 2G2D....

Basic 5 um air filter with 3/4" connection for compressed air and neutral gases with a flow rate of 8,000 l/min. Design according to ATEX II 2G2D. Maximum inlet pressure 1,5 -...

FUTURA Treatment Units - Hub Modules, Designed for compressed air and neutral gases, Design ATEX II 2G2D, Operating temperature -10°C to +50°C, Materials : body - Grivory...

Lubricating grease gun in 3/4" design with compressed air flow up to 15 800 l/min. Design according to ATEX II 2G2D. Maximum inlet pressure 16 bar. Operating temperature -10°C...

Switching valve with 230 VAC in 3/4" version with flow rate up to 12 500 l/min FUTURA series up to 16 bar. Designed for compressed air and for neutral gases complying with ATEX...

0.3 um air pre-filter with 3/4" connection for compressed air and for neutral gases with a flow rate of 2,000 l/min. Design according to ATEX II 2G2D. Maximum inlet pressure 1,5...

Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...

Pressure regulator with 5 um air filtration for compressed air with or without oil and for neutral gases up to 16 bar. Design according to ATEX II 2G2D. The adjusting pin can be...

Pressure regulator with 5 um air filtration for compressed air with or without oil and for neutral gases up to 16 bar. Design according to ATEX II 2G2D. The adjusting pin can be...

Pressure regulator with 5 um air filtration for compressed air with or without oil and for neutral gases up to 16 bar. Design according to ATEX II 2G2D. The adjusting pin can be...

Pressure regulator with 5 um air filtration for compressed air with or without oil and for neutral gases up to 16 bar. Design according to ATEX II 2G2D. The adjusting pin can be...

Pressure regulator with 5 um air filtration for compressed air with or without oil and for neutral gases up to 16 bar. Design according to ATEX II 2G2D. The adjusting pin can be...

Shut-off valve in 3/4" version with flow rate up to 16,000 l/min FUTURA series up to 16 bar. Designed for compressed air and for neutral gases complying with ATEX II 2G2D....

Switching valve with 230 VAC in 1/4" version with flow rate up to 2,000 l/min FUTURA series up to 16 bar. Designed for compressed air and for neutral gases complying with ATEX...

Switching valve with 230 VAC in 3/4" version with flow rate up to 12 500 l/min FUTURA series up to 16 bar. Designed for compressed air and for neutral gases complying with ATEX...

Switching valve with 24 VDC in 3/4" version with flow rate up to 12 500 l/min FUTURA series up to 16 bar. Designed for compressed air and for neutral gases complying with ATEX...

Complete three-piece assembly with 3/4" connection and a maximum flow rate of 12,300 l/min. Inlet pressure up to 16 bar with control range : 0,1 - 1 bar. It consists of a...

Complete three-piece assembly with 3/4" connection and a maximum flow rate of 12,300 l/min. Inlet pressure up to 16 bar with control range : 0,1 - 2 bar. It consists of a...