Filtration, regulation and treatment of compressed air, Page 9
-
Treatment units; basic units for air
-
Industrial filtration; ISO 8573 - ISO 12500
-
Air dryers; air moisture removal
-
Pressure regulators; precision robust design
-
Cyclone separators; cyclone filtration principle
-
Water-oil separators; separates water from oil
Bestsellers

Service KIT after 4 years of operation of the Omega Air adsorption dryer FDRY-6500 series includes a replacement microfilter cartridge, dust filter and replacement silencer,...

AAFB 2" coarse filter for removal of the largest mechanical impurities up to 15 um from compressed air according to ISO 8573-1 class 7. Body with easily removable container and...

The IEDC electronic skimmers with alarm output for remote monitoring and with the possibility of service connection for obtaining operating data from the device are primarily...

Replacement sintered bronze 15 µm filter cartridge for OMEGA AIR AAFB-335 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the filter cartridge...

Replacement sintered bronze 15 µm filter cartridge for OMEGA AIR AAFB-510 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the filter cartridge...

Replacement sintered bronze 15 µm filter cartridge for OMEGA AIR AAFB-780 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the filter cartridge...

Replacement filter with activated carbon AAFA2 for OMEGA AIR AAFA2-120. Use as a filter to remove residual oil content of oil vapours and aerosols with < 0.005 mg/m3from...

Replacement filter with activated carbon AAFA2 for OMEGA AIR AAFA2-335. Use as a filter to remove residual oil content of oil vapours and aerosols with < 0.005 mg/m3from...

AAFM pre-filter in 3" design for removal of fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed...

AAFMS2 1 1/2" molecular sieve capsule filter designed to prevent moisture leakage into the air during shutdown of adsorption dryers according to ISO 8573-1 class 1. Body with...

AAFMS2 1 1/2" molecular sieve capsule filter designed to prevent moisture leakage into the air during shutdown of adsorption dryers according to ISO 8573-1 class 1. Body with...

Absorption filter with 0.005 um activated carbon, 1" connection, for compressed air and neutral gases with a flow rate of 3,500 l/min. Design according to ATEX II 2G2D. Maximum...

Adsorption filter with activated carbon for compressed air from Hankison NGF series type CF according to ISO. Filter size F11 with 1 1/2" female threads. The filter is not...

Adsorption filter with activated carbon for compressed air from Hankison NGF series type CF according to ISO. Filter size F10 with 1 1/2" female threads. The filter is not...

Adsorption filter with activated carbon for compressed air from Hankison NGF series type CF according to ISO. Filter size F08 with 1" female thread connection. The filter is not...

Adsorption filter with activated carbon for compressed air from Hankison NGF series type CF according to ISO. Filter size F04 with 1/2" female thread connection. The filter is...

Adsorption filter with activated carbon for compressed air from Hankison NGF series type CF according to ISO. Filter size F02 with 1/4" female thread connection. The filter is...

Adsorption filter with activated carbon for compressed air from Hankison NGF series type CF according to ISO. Filter size F12 with 2" internal thread connection. The filter is...

Adsorption filter with activated carbon for compressed air from Hankison NGF series type CF according to ISO. Filter size F07 with 3/4" female thread connection. The filter is...

Adsorption filter with activated carbon for compressed air from Hankison NGF series type CF according to ISO. Filter size F06 with 3/4" female thread connection. The filter is...

Adsorption filter with activated carbon for compressed air from Hankison NGF series type CF according to ISO. Filter size F03 with 3/8" female threads. The filter is not...

The ADRY-12 series adsorption dryer has been designed for continuous separation of water vapour from compressed air at flow rates up to 200 l/min. Reduces the pressure dew point...

The ADRY-200 Series Adsorption Dryer was designed for continuous separation of water vapor from compressed air at flow rates up to 3,333 l/min. Reduces the pressure dew point...

The ADRY-36 series adsorption dryer has been designed for continuous separation of water vapour from compressed air at flow rates up to 600 l/min. Reduces the pressure dew point...

The ADRY-75 Series Adsorption Dryer was designed for continuous separation of water vapor from compressed air at flow rates up to 1,250 l/min. Reduces the pressure dew point...

The BDRY-1000 Adsorption Dryer is designed for continuous separation of water vapour from compressed air with a flow rate of up to 13,067 l/min at a maximum pressure of 16 bar...

Adsorption dryer BDRY-110 designed for permanent separation of water vapour from compressed air with a flow rate of up to 1 433 l/min at a maximum pressure of 16 bar and...

Adsorption dryer BDRY-1200 designed for continuous separation of water vapour from compressed air with a flow rate of up to 15,050 l/min at a maximum pressure of 16 bar and...

Adsorption dryer BDRY-150 designed for permanent separation of water vapour from compressed air with a flow rate of up to 1 958 l/min at a maximum pressure of 16 bar and...

The BDRY-200 adsorption dryer is designed for continuous separation of water vapour from compressed air with a flow rate of up to 2,617 l/min at a maximum pressure of 16 bar and...

The BDRY-250 Adsorption Dryer is designed for continuous separation of water vapour from compressed air with a flow rate of up to 3,400 l/min at a maximum pressure of 16 bar and...

Adsorption dryer BDRY-300 designed for permanent separation of water vapour from compressed air with a flow rate of up to 4,183 l/min at a maximum pressure of 16 bar and...

Adsorption dryer BDRY-400 designed for permanent separation of water vapour from compressed air with a flow rate of up to 5 358 l/min at a maximum pressure of 16 bar and...

Adsorption dryer BDRY-600 designed for continuous separation of water vapour from compressed air with a flow rate of up to 7,708 l/min at a maximum pressure of 16 bar and...

Adsorption dryer BDRY-800 designed for permanent separation of water vapour from compressed air with a flow rate of up to 10 058 l/min at a maximum pressure of 16 bar and...

The FDRY-1200 Adsorption Dryer is designed for continuous separation of water vapour from compressed air with a flow rate of up to 15,600 l/min at a maximum pressure of 16 bar...

The FDRY-1500 Adsorption Dryer is designed for continuous separation of water vapour from compressed air with a flow rate of up to 19,500 l/min at a maximum pressure of 16 bar...

The FDRY-2000 Adsorption Dryer is designed for continuous separation of water vapour from compressed air with a flow rate of up to 26,000 l/min at a maximum pressure of 16 bar...

The FDRY-2500 Adsorption Dryer is designed for continuous separation of water vapour from compressed air with a flow rate of up to 32,500 l/min at a maximum pressure of 16 bar...

The AFA2-130V filter cartridge provides superior breathable air treatment. Filtration provided through activated carbon. Working pressure up to 16 bar, maximum flow rate 13,000...