Filtration, regulation and treatment of compressed air, Page 7
- Treatment units; basic units for air
- Industrial filtration; ISO 8573 - ISO 12500
- Air dryers; air moisture removal
- Pressure regulators; precision robust design
- Cyclone separators; cyclone filtration principle
- Water-oil separators; separates water from oil
Bestsellers
Accessories and spare parts for METAL WORK air treatment units. Replacement container for METAL WORK filters size 3/8"-1/2".
Replacement container for FUTURA filters in size 1 with semi-automatic drainage - (manual manual and automatic drainage based on the fullness of the container). Suitable only...
Accessories and spare parts for METAL WORK air treatment units. Replacement filter insert 20 um for filter size 3/8"-1/2" as replacement insert for FDM and FWA air filters.
AAFS 1" microfilter to remove micro impurities up to 0.01 um from compressed air according to ISO 8573-1 class 1. Body with easily removable container and designed for a flow...
Replacement catalytic filters (hopcalite) for OMEGA AIR - AAFH2-120. Suitable for removing CO andCO2 to the level of breathable air from compressed air according to ISO 8573-1...
Accessories and spare parts for METAL WORK air treatment units. Replacement container for METAL WORK filters size 3/4"-1".
AAFM pre-filter in 2" design for removal of fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed...
AAFP 1" basic filter for removal of basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable container and designed...
The ADRY-105 Series Adsorption Dryer was designed for continuous separation of water vapor from compressed air at flow rates up to 1,750 l/min. Reduces the pressure dew point...
The ADRY-24 series adsorption dryer was designed for continuous separation of water vapour from compressed air at flow rates up to 400 l/min. Reduces the pressure dew point down...
The ADRY-60 series adsorption dryer was designed for continuous separation of water vapour from compressed air at flow rates up to 1,000 l/min. Reduces the pressure dew point...
Fixing bracket with screws under the cover of the FUTURA size 2 unit. All modules of FUTURA units can be mounted in this way. Easily mounted with wall bracket and similar mounting.
Complete unit 2-piece pressure regulator assembly with filter and oiler in one unit. Designed for compressed air and neutral gases. Design according to ATEX II 2G2D. Maximum...
Pressure regulator with 5 um air filtration for compressed air with or without oil and for neutral gases up to 16 bar. Design according to ATEX II 2G2D. The adjusting pin can be...
Basic 5 um air filter with 1/2" connection for compressed air and neutral gases with a flow rate of 3,500 l/min. Design according to ATEX II 2G2D. Maximum inlet pressure 1,5 -...
AAFM pre-filter in 3/4" design for removal of fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed...
Dew point sensor including cable - for air saving regeneration - ADRY-OS. A-DRY dryers can operate in two operating modes depending on the settings of the control unit. Fixed...
The BFM pre-filter insert is used to remove mechanical impurities and oil from the compressed air. Borosilicate microfibre insert with a filtration capacity of up to 0.1 μm....
Replacement filter with capsule and molecular sieve for OMEGA AIR - AAFH2-120. Designed as a fuse against moisture leakage into the air during shutdown of ISO 8573-1 class 1...
AAFM 1" pre-filter for the removal of fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed for a...
AAFM 1" pre-filter for the removal of fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed for a...
AAFM pre-filter in 1/4" design for removal of fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed...
Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...
AAFP basic filter in 3/8" design to remove basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable container and...
The CHPA filter insert is used to remove mechanical impurities from compressed air. Borosilicate microfibre insert with a filtration capacity of up to 0.01 μm. Operating...
Replacement microfilter cartridge with filtration capacity 0,01 µm for OMEGA AIR AAFS-198 microfilters. Recommended replacement 12 months or every 4,000 MH and when clogging of...
Replacement catalytic filters (hopcalite) for OMEGA AIR - AAFH2-198. Suitable for removing CO andCO2 to the level of breathable air from compressed air according to ISO 8573-1...
AAFP basic filter in 3/4" design for removal of basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable container...
Replacement filter cartridge with activated carbon for FA FUTURA filter with filtration of impurities to 0,005 um. The filter cartridge change is indicated by an indicator and...
0.01 um compressed air microfilter with 1/2" connection for compressed air and neutral gases with a flow rate of 450 l/min. Design according to ATEX II 2G2D. Maximum inlet...
Compressed air microfilter 0,01 um with 3/4" connection for compressed air and for neutral gases with flow rate 1 400 l/min. Design according to ATEX II 2G2D. Maximum inlet...
Lubricating grease gun in 1/2" design with compressed air flow up to 8,000 l/min. Design according to ATEX II 2G2D. Maximum inlet pressure 16 bar. Operating temperature -10°C to...
Pressure regulator with 5 um air filtration for compressed air with or without oil and for neutral gases up to 16 bar. Design according to ATEX II 2G2D. The adjusting pin can be...
Pressure regulator with 5 um air filtration for compressed air with or without oil and for neutral gases up to 16 bar. Design according to ATEX II 2G2D. The adjusting pin can be...
Replacement fine filter cartridge with 0.1 µm filtration capacity for OMEGA AIR AAFM-78 pre-filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...
Replacement microfiltration cartridge with filtration capacity 0,01 µm for OMEGA AIR AAFS-2760 microfilters. Recommended replacement 12 months or every 4,000 MH and when...
Replacement fine filter cartridge with 0.1 µm filtration capacity for OMEGA AIR AAFM-2760 pre-filter. Recommended replacement 12 months or every 4,000 MH and when clogging of...
Replacement microfilter cartridge with filtration capacity 0,01 µm for OMEGA AIR AAFS-78 microfilters. Recommended replacement 12 months or every 4,000 MH and when clogging of...
Replacement fine filter cartridge with 0.1 µm filtration capacity for OMEGA AIR AAFM-25 and AAFM-30 pre-filters. Recommended replacement 12 months or every 4,000 MH and when...
Shut-off valve in 1/4" version with flow rate up to 2,000 l/min FUTURA series up to 16 bar. Designed for compressed air and for neutral gases complying with ATEX II 2G2D....