Filtration, regulation and treatment of compressed air, Page 62
- Treatment units; basic units for air
- Industrial filtration; ISO 8573 - ISO 12500
- Air dryers; air moisture removal
- Pressure regulators; precision robust design
- Cyclone separators; cyclone filtration principle
- Water-oil separators; separates water from oil
Bestsellers
Proportional pressure regulator with a flow rate of 530 l/min, 0 - 4 bar control, controlled by 0-10 V electrical signal. Integrated transducer to convert the electrical...
Regulator with inlet up to 25 bar 3/8" thread for pressure reduction of compressed air and other non-volatile and non-toxic gases. Control range 0.5 to 3 bar up to a flow rate...
Adsorption filter with activated carbon AAFA2 in 1" version for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO...
Electronic timed condensate drain for compressed air systems up to 150 bar, operating on a time switching valve. External mounting on the filter body with 1/2" thread. Simple...
Electronic stainless steel timed condensate drain from compressed air system up to 16 bar, working on time switching valve. External mounting on the filter body with 1/2"...
Regulator for pressure reduction of compressed air and other non-volatile and non-toxic gases with inlet G 3/4" and outlet pressure regulation 0,5 - 16 Bar. Maximum inlet...
Service KIT after one year of operation Omega Air FDRY-2500-1R series adsorption dryer includes a replacement dust filter microfilter cartridge and replacement silencers for...
Fixing bracket with screws under the cover of the FUTURA size 4 unit. All modules of FUTURA units can be mounted in this way. Easily mounted with wall bracket and similar mounting.
Electronic timed condensate drain for compressed air systems up to 25 bar, operating on a time switching valve. External mounting on the filter body with 1/2" thread. Simple...
Regulator with inlet up to 25 bar 1" thread for pressure reduction of compressed air and other non-volatile and non-toxic gases. Control range 0.5 to 10 bar up to a flow rate of...
Regulator with inlet up to 25 bar 1/4" thread for pressure reduction of compressed air and other non-volatile and non-toxic gases. Control range 0.5 to 10 bar up to a flow rate...
Regulator with inlet up to 25 bar 3/8" thread for pressure reduction of compressed air and other non-volatile and non-toxic gases. Control range 0.5 to 10 bar up to a flow rate...
Regulator with inlet up to 25 bar 3/8" thread for pressure reduction of compressed air and other non-volatile and non-toxic gases. Control range 0.5 to 10 bar up to a flow rate...
Basic 5 um air filter with 1/4" connection for compressed air and for neutral gases with a flow rate of 2,200 l/min. Design according to ATEX II 2G2D. Maximum inlet pressure 1,5...
Replacement dust filter cartridge with 1 µm filtration capacity for OMEGA AIR AAFR-1500 and AAFR-1680. Recommended replacement 12 months or every 4,000 MH and when clogging of...
AAFP basic filter in 1 1/2" design for removal of basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable...
After one year of operation, the Omega Air BDRY-1200 Series Adsorption Dryer Service KIT includes a replacement microfilter cartridge, dust filter and replacement silencers for...
Regulator with inlet up to 25 bar 1/4" thread for pressure reduction of compressed air and other non-volatile and non-toxic gases. Control range 0.6 to 6 bar up to a flow rate...
Regulator with inlet up to 25 bar 3/8" thread for pressure reduction of compressed air and other non-volatile and non-toxic gases. Control range 0.6 to 6 bar up to a flow rate...
Service KIT after 4 years of operation of the Omega Air adsorption dryer FDRY-6500 series includes a replacement microfilter cartridge, dust filter and replacement silencer,...
Regulator with inlet up to 25 bar 3/4" thread for pressure reduction of compressed air and other non-volatile and non-toxic gases. Control range 0.5 to 10 bar up to a flow rate...
Regulator with inlet up to 25 bar 1/2" thread for pressure reduction of compressed air and other non-volatile and non-toxic gases. Control range 0.5 to 10 bar up to a flow rate...
Electronic timed condensate drain for compressed air systems up to 420 bar, operating on a time switching valve. External mounting on the filter body with 1/4" thread. Simple...
Electronic time release condensate drain with 24V DC voltage from compressed air system up to 420 bar, working on time switching valve. External mounting on the filter body with...
The TACM-12 small dry separator is designed to separate oil vapours from compressed air using activated carbon from the compressor up to a flow rate of 200 l/min at a maximum...
The ADRY-6 series adsorption dryer has been designed for continuous separation of water vapour from compressed air at flow rates up to 100 l/min. Reduces the pressure dew point...
precision compressed air pressure regulator DRF31-3GS with a flow rate of 540 l/min. Control range 0.2 to 6 bar. Inlet pressure up to 16 bar and connection via 1/4" thread....
AAFC cyclone separator in 1 1/2" design with a flow rate of 8,500 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the...
FUTURA Treatment Units - Hub Modules, Designed for compressed air and neutral gases, Design ATEX II 2G2D, Operating temperature -10°C to +50°C, Materials : body - Grivory...
FUTURA Treatment Units - Hub Modules, Designed for compressed air and neutral gases, Design ATEX II 2G2D, Operating temperature -10°C to +50°C, Materials : body - Grivory...
FUTURA Treatment Units - Hub Modules, Designed for compressed air and neutral gases, Design ATEX II 2G2D, Operating temperature -10°C to +50°C, Materials : body - Grivory...
Dust filter AAFR in 1/4" design to remove dust impurities up to 1 um from compressed air according to ISO 8573-1 class 3. Body with easily removable container and designed for a...
AAFS 1/4" microfilter for removal of micro impurities up to 0.01 um from compressed air according to ISO 8573-1 class 1. Body with easily removable container and designed for a...
The FDRY-1200 Adsorption Dryer is designed for continuous separation of water vapour from compressed air with a flow rate of up to 15,600 l/min at a maximum pressure of 16 bar...
The FDRY-3000 Adsorption Dryer is designed for continuous separation of water vapour from compressed air with a flow rate of up to 39,000 l/min at a maximum pressure of 16 bar...
The FDRY-3750 Adsorption Dryer is designed for continuous separation of water vapour from compressed air with a flow rate of up to 48,750 l/min at a maximum pressure of 16 bar...
The FDRY-6500 Adsorption Dryer is designed for continuous separation of water vapour from compressed air with a flow rate of up to 84,500 l/min at a maximum pressure of 16 bar...
The FDRY-2500 Adsorption Dryer is designed for continuous separation of water vapour from compressed air with a flow rate of up to 32,500 l/min at a maximum pressure of 16 bar...
The ADRY-60 series adsorption dryer was designed for continuous separation of water vapour from compressed air at flow rates up to 1,000 l/min. Reduces the pressure dew point...
Adsorption dryer BDRY-150 designed for permanent separation of water vapour from compressed air with a flow rate of up to 1 958 l/min at a maximum pressure of 16 bar and...