Filtration, regulation and treatment of compressed air, Page 57
- Treatment units; basic units for air
- Industrial filtration; ISO 8573 - ISO 12500
- Air dryers; air moisture removal
- Pressure regulators; precision robust design
- Cyclone separators; cyclone filtration principle
- Water-oil separators; separates water from oil
Bestsellers
The CHPR filter cartridge is used to remove the largest mechanical impurities from the compressed air. Acrylic fibre, cellulose liner with filtration capacity up to 1 μm....
The IHPS-047V filter cartridge is used to remove the largest mechanical impurities from compressed air. Filtration capacity up to 0.01 um. Operating temperature from +1.5 to +65...
The IHPS-030V filter cartridge is used to remove the largest mechanical impurities from compressed air. Filtration capacity up to 0.01 um. Operating temperature from +1.5 to +65...
The IHPS-018V filter cartridge is used to remove the largest mechanical impurities from compressed air. Filtration capacity up to 0.01 um. Operating temperature from +1.5 to +65...
The IHPS-094V filter cartridge is used to remove the largest mechanical impurities from compressed air. Filtration capacity up to 0.01 um. Operating temperature from +1.5 to +65...
The filter insert IHPS-010V is used to remove the largest mechanical impurities from compressed air. Filtration capacity up to 0.01 um. Operating temperature from +1.5 to +65 °C.
Microfilter IHP1S with G1 1/2" connection thread for effective removal of solid impurities, oil, odour and other impurities from compressed air up to 0.01 um. Maximum working...
The IHP1S microfilter with G1/4" connection thread effectively removes solid impurities, oil, odour and other impurities from compressed air up to 0.01 um. Maximum working...
Microfilter IHP1S with G2 connection thread" for effective removal of solid impurities, oil, odour and other impurities from compressed air up to 0.01 um. Maximum working...
CHP1R pre-filter with G1" connection thread for effective removal of solid impurities, oil, water and other impurities from compressed air up to 1 um. Maximum working pressure...
CHP1R pre-filter with G2" connection thread for effective removal of solid impurities, oil, water and other impurities from compressed air up to 1 um. Maximum working pressure...
CHP2R pre-filter with G1" connection thread for effective removal of solid impurities, oil, water and other impurities from compressed air up to 1 um. Maximum working pressure...
CHP4R pre-filter with G1" connection thread designed for effective removal of solid impurities, oil, water and other impurities from compressed air up to 1 um. Maximum working...
The MDX18000 series condensation dryer with a maximum flow rate of 18,000 l/min and inlet pressure up to 14 bar is used to remove condensate and moisture from compressed air...
Absorption filter with 0.005 um activated carbon, 1" connection, for compressed air and neutral gases with a flow rate of 3,500 l/min. Design according to ATEX II 2G2D. Maximum...
Absorption filter with activated carbon 0,005 um, 1/2" connection, for compressed air and neutral gases with flow rate 1 250 l/min. Design according to ATEX II 2G2D. Maximum...
Absorption filter with 0.005 um activated carbon, 3/4" connection, for compressed air and neutral gases with a flow rate of 3,500 l/min. Design according to ATEX II 2G2D....
Absorption filter with 0.005 um activated carbon, 3/8" connection, for compressed air and neutral gases with a flow rate of 1,250 l/min. Design according to ATEX II 2G2D....
0.01 um compressed air microfilter with 1" connection for compressed air and neutral gases with a flow rate of 1,400 l/min. Design according to ATEX II 2G2D. Maximum inlet...
0.3 um air pre-filter with 1" connection for compressed air and for neutral gases with a flow rate of 2,000 l/min. Design according to ATEX II 2G2D. Maximum inlet pressure 1,5 -...
0.3 um air pre-filter with 1/2" connection for compressed air and neutral gases with a flow rate of 800 l/min. Design according to ATEX II 2G2D. Maximum inlet pressure 1,5 - 16...
0.3 um air pre-filter with 3/4" connection for compressed air and for neutral gases with a flow rate of 2,000 l/min. Design according to ATEX II 2G2D. Maximum inlet pressure 1,5...
0.3 um air pre-filter with 3/8" connection for compressed air and neutral gases with a flow rate of 800 l/min. Design according to ATEX II 2G2D. Maximum inlet pressure 1,5 - 16...
Replacement cyclone separator body CKLC with threaded connection G 1". It enables inexpensive and effective removal of water and impurities from compressed air. Working pressure...
Replacement cyclone separator body CKLC with threaded connection G 1 1/2". It enables inexpensive and effective removal of water and impurities from compressed air. Working...
Complete filter system for breathable air B-AIR PLUS. The system includes a microfilter to remove impurities down to 0.01 um, an activated carbon filter to eliminate oil...
The filters are used to remove the smallest mechanical impurities from compressed air up to 1 um according to ISO 8573-1 class 3. Connection by flange with DN80 clearance....
The filters are used to remove the smallest mechanical impurities from compressed air up to 1 um according to ISO 8573-1 class 3. Connection by flange with DN100 clearance. The...
The filters are used to remove the smallest mechanical impurities from compressed air up to 1 um according to ISO 8573-1 class 3. Connection by flange with DN125 clearance....
The filters are used to remove the smallest mechanical impurities from compressed air up to 1 um according to ISO 8573-1 class 3. Connection by flange with DN150 clearance....
The filters are used to remove the largest mechanical impurities from compressed air up to 15 um according to ISO 8573-1 class 7. Connection by flange with DN80 clearance....
The filters are used to remove the largest mechanical impurities from compressed air up to 15 um according to ISO 8573-1 class 7. Connection by flange with DN100 clearance. The...
The filters are used to remove the largest mechanical impurities from compressed air up to 15 um according to ISO 8573-1 class 7. Connection by flange with DN125 clearance....
The filters are used to remove the largest mechanical impurities from compressed air up to 15 um according to ISO 8573-1 class 7. Connection by flange with DN150 clearance....
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.01 um and oil according to ISO 8573-1 class 1. Connection by flange with DN80...
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.01 um and oil according to ISO 8573-1 class 1. Connection by flange with DN100...
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.01 um and oil according to ISO 8573-1 class 1. Connection by flange with DN125...
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.01 um and oil according to ISO 8573-1 class 1. Connection by flange with DN150...
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.1 um and oil according to ISO 8573-1 class 2. Connection by flange with DN80...
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.1 um and oil according to ISO 8573-1 class 2. Connection by flange with DN100...