Filtration, regulation and treatment of compressed air, Page 56
- Treatment units; basic units for air
- Industrial filtration; ISO 8573 - ISO 12500
- Air dryers; air moisture removal
- Pressure regulators; precision robust design
- Cyclone separators; cyclone filtration principle
- Water-oil separators; separates water from oil
Bestsellers
Vacuum pre-filter PVACP with G3" connection thread for protection of vacuum pumps and vacuum pumps against solid impurities. Filtration capacity up to 3 um. Working pressure 20...
Vacuum pre-filter PVACP with G3/4" connection thread for protection of vacuum pumps and vacuum pumps against solid impurities. Filtration capacity up to 3 um. Working pressure...
Vacuum pre-filter PVACP with G3/8" connection thread for protection of vacuum pumps and vacuum pumps against solid impurities. Filtration capacity up to 3 um. Working pressure...
Series of AISI316 stainless steel treatment units designed primarily for industrial applications in sectors such as food, chemical and petrochemical industries and laboratory...
Series of AISI316 stainless steel treatment units designed primarily for industrial applications in sectors such as food, chemical and petrochemical industries and laboratory...
Series of AISI316 stainless steel treatment units designed primarily for industrial applications in sectors such as food, chemical and petrochemical industries and laboratory...
Float-operated condensate drain valve for compressed air systems up to 13 bar. Version AOK13PA for external mounting on the filter body with 1/2" thread.
Complete filter system for breathable air B-AIR PLUS. The system includes a microfilter to remove impurities down to 0.01 um, an activated carbon filter to eliminate oil...
The TAC-1000 dry separator is designed to separate oil vapour from compressed air using activated carbon from the compressor up to a flow rate of 16,667 l/min at a maximum...
Dry separation TAC-110 designed for separation of oil vapours from compressed air by activated carbon from the compressor up to a flow rate of 1 833 l/min at a maximum pressure...
Dry separation TAC-150 designed for separation of oil vapours from compressed air by activated carbon from the compressor up to a flow rate of 2 500 l/min at a maximum pressure...
The TAC-200 dry separator is designed to separate oil vapours from compressed air using activated carbon from the compressor up to a flow rate of 3,333 l/min at a maximum...
Dry separation TAC-250 designed for separation of oil vapours from compressed air by activated carbon from the compressor up to a flow rate of 5 333 l/min at a maximum pressure...
Dry separation TAC-300 designed for separation of oil vapours from compressed air by activated carbon from the compressor up to a flow rate of 5 333 l/min at a maximum pressure...
Dry separation TAC-400 designed for separation of oil vapours from compressed air by activated carbon from the compressor up to a flow rate of 6 833 l/min at a maximum pressure...
The TAC-600 dry separator is designed to separate oil vapours from compressed air using activated carbon from the compressor up to a flow rate of 9,833 l/min at a maximum...
The TAC-800 dry separator is designed to separate oil vapours from compressed air using activated carbon from the compressor up to a flow rate of 12,833 l/min at a maximum...
The TACM-105 small dry separator is designed to separate oil vapours from compressed air using activated carbon from the compressor up to a flow rate of 1,950 l/min at a maximum...
The TACM-150 small dry separator is designed for separation of oil vapours from compressed air using activated carbon from the compressor up to a flow rate of 2,500 l/min at a...
The TACM-200 small dry separator is designed to separate oil vapours from compressed air using activated carbon from the compressor up to a flow rate of 3,333 l/min at a maximum...
The TACM-56 small dry separator is designed to separate oil vapours from compressed air using activated carbon from the compressor up to a flow rate of 1,250 l/min at a maximum...
The TACM-6 small dry separator is designed to separate oil vapours from compressed air using activated carbon from the compressor up to a flow rate of 100 l/min at a maximum...
The TACM-70 small dry separator is designed to separate oil vapours from compressed air using activated carbon from the compressor up to a flow rate of 1,250 l/min at a maximum...
Filter cartridge for medical vacuum filter MVAC-0026. Applications mainly in medical devices. Working pressure 20 to 2000 mbar, maximum flow up to 60 l/min.
The HFP filter cartridge is used to remove mechanical impurities from compressed air. Acrylic fibre and cellulose liner with a filtration capacity of up to 3 μm. Working...
Filter cartridge for HFR filter to remove mechanical impurities from compressed air. Acrylic fibre and cellulose liner with a filtration capacity of up to 1 μm. Working pressure...
The CHPR filter cartridge is used to remove the largest mechanical impurities from the compressed air. Acrylic fibre, cellulose liner with filtration capacity up to 1 μm....
The HFA filter cartridge removes mechanical impurities and oil from the compressed air. Borosilicate microfibre insert with activated carbon component with filtration capacity...
The CHPB filter cartridge is used to remove the largest mechanical impurities from the compressed air. Sintered bronze insert with filtration capacity up to 15 μm. Operating...
The CHPR filter cartridge is used to remove the largest mechanical impurities from the compressed air. Acrylic fibre, cellulose liner with filtration capacity up to 1 μm....
The CHPR filter cartridge is used to remove the largest mechanical impurities from the compressed air. Acrylic fibre, cellulose liner with filtration capacity up to 1 μm....
The IHPI-010V filter insert is used to remove the largest mechanical impurities from compressed air. Filtration capacity up to 5 um. Operating temperature from +1.5 to +65 °C.
The IHPM-010V filter cartridge is used to remove the largest mechanical impurities from compressed air. Filtration capacity up to 0.1 um. Operating temperature from +1.5 to +65 °C.
The IHPN-010V filter cartridge is used to remove the largest mechanical impurities from compressed air. Filtration capacity up to 25 um. Operating temperature from +1.5 to +65 °C.
The filter insert IHPS-010V is used to remove the largest mechanical impurities from compressed air. Filtration capacity up to 0.01 um. Operating temperature from +1.5 to +65 °C.
Switching valve with 230 VAC in 1/2" version with flow rate up to 4 500 l/min FUTURA series up to 16 bar. Designed for compressed air and for neutral gases complying with ATEX...
Switching valve with 230 VAC in 1/4" version with flow rate up to 2,000 l/min FUTURA series up to 16 bar. Designed for compressed air and for neutral gases complying with ATEX...
Switching valve with 230 VAC in 3/4" version with flow rate up to 12 500 l/min FUTURA series up to 16 bar. Designed for compressed air and for neutral gases complying with ATEX...
Switching valve with 230 VAC in 3/8" version with flow rate up to 2,000 l/min FUTURA series up to 16 bar. Designed for compressed air and for neutral gases complying with ATEX...
Switching valve with 230 VAC in 3/8" version with flow rate up to 4 500 l/min FUTURA series up to 16 bar. Designed for compressed air and for neutral gases complying with ATEX...