Filtration, regulation and treatment of compressed air, Page 41
- Treatment units; basic units for air
- Industrial filtration; ISO 8573 - ISO 12500
- Air dryers; air moisture removal
- Pressure regulators; precision robust design
- Cyclone separators; cyclone filtration principle
- Water-oil separators; separates water from oil
Bestsellers
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.01 um and oil according to ISO 8573-1 class 1. Connection by flange with DN125...
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.01 um and oil according to ISO 8573-1 class 1. Connection by flange with DN150...
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.1 um and oil according to ISO 8573-1 class 2. Connection by flange with DN80...
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.1 um and oil according to ISO 8573-1 class 2. Connection by flange with DN100...
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.1 um and oil according to ISO 8573-1 class 2. Connection by flange with DN125...
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.1 um and oil according to ISO 8573-1 class 2. Connection by flange with DN150...
The filters are used to remove mechanical impurities from compressed air up to 3 um according to ISO 8573-1 class 6. Connection by flange with DN80 clearance. Designed for flow...
The filters are used to remove mechanical impurities from compressed air up to 3 um according to ISO 8573-1 class 6. Connection by flange with DN100 clearance. The design allows...
The filters are used to remove mechanical impurities from compressed air up to 3 um according to ISO 8573-1 class 6. Connection by flange with DN125 clearance. Designed to allow...
The filters are used to remove mechanical impurities from compressed air up to 3 um according to ISO 8573-1 class 6. Connection by flange with DN150 clearance. Designed for flow...
Differential pressure gauge to indicate filter cartridge clogging in FUTURA compressed air treatment units. Keep track of the need to change the filter cartridge and keep the...
The CHP1S microfilter with G1 1/2" connection thread is designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.01 um....
The CHP1S microfilter with G1 1/4" connection thread is designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.01 um....
The CHP1S microfilter with G3/4" connection thread is designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.01 um. Maximum...
The CHP1S microfilter with G3/8" connection thread is designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.01 um. Maximum...
The CHP2M microfilter with G1 1/2" connection thread is designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.1 um....
The CHP2M microfilter with G1 1/4" connection thread is designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.1 um....
The CHP2S microfilter with G1/2" connection thread is designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.01 um. Maximum...
The CHP2S microfilter with G3/4" connection thread is designed for effective removal of solid impurities, oil, water and other impurities from compressed air up to 0.01 um....
The CHP4A microfilter with G1 1/4" connection thread is designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.01 um....
The CHP4A microfilter with G1/4" connection thread is designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.01 um. Maximum...
The CHP4M microfilter with G1 1/4" connection thread is designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.1 um....
The CHP4S microfilter with G1/4" connection thread is designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.01 um. Maximum...
SPFM microfilter with G3/8" connection thread for high efficiency filtration of compressed air, process air and industrial gases. Filtration capacity up to 0.01 um. Maximum...
0.01 um compressed air microfilter with 1" connection for compressed air and neutral gases with a flow rate of 1,400 l/min. Design according to ATEX II 2G2D. Maximum inlet...
0.01 um compressed air microfilter with 3/8" connection for compressed air and neutral gases with a flow rate of 300 l/min. Design according to ATEX II 2G2D. Maximum inlet...
0.01 um compressed air microfilter with 3/8" connection for compressed air and neutral gases with a flow rate of 450 l/min. Design according to ATEX II 2G2D. Maximum inlet...
Removes mechanical dirt up to 0.01 um and oil according to ISO 8573-1 class 1. Connection with internal pipe threads 1 1/2". The design allows a flow rate of up to 6667 l/min....
Removes mechanical dirt up to 0.01 um and oil according to ISO 8573-1 class 1. Connection with internal pipe threads 1 1/2". The design allows a flow rate of up to 4700 l/min....
Removes mechanical dirt up to 0.01 um and oil according to ISO 8573-1 class 1. Connection by internal pipe threads 1". The design allows a flow rate of up to 3400 l/min. Special...
Removes mechanical dirt up to 0.01 um and oil according to ISO 8573-1 class 1. Connection with 2" internal pipe threads. The design allows a flow rate of up to 13,317 l/min....
Removes mechanical dirt up to 0.01 um and oil according to ISO 8573-1 class 1. Connection with 2" internal pipe threads. The design allows a flow rate of up to 8233 l/min....
HFPM microfilter with G1 1/2" connection thread for use in areas with high corrosive environments. Filtration capacity up to 0.01 um. Maximum working pressure up to 50 bar,...
HFPM microfilter with G1 1/4" connection thread for use in areas with high corrosive environments. Filtration capacity up to 0.01 um. Maximum working pressure up to 50 bar,...
HFPM microfilter with G1" connection thread for use in areas with high corrosive environments. Filtration capacity up to 0.01 um. Maximum working pressure up to 50 bar, maximum...
HFPM microfilter with G1/2" connection thread for use in areas with high corrosive environments. Filtration capacity up to 0.01 um. Maximum working pressure up to 50 bar,...
HFPM microfilter with G2" connection thread for use in areas with high corrosive environments. Filtration capacity up to 0.01 um. Maximum working pressure up to 50 bar, maximum...
HFPM microfilter with G2" connection thread for use in areas with high corrosive environments. Filtration capacity up to 0.01 um. Maximum working pressure up to 50 bar, maximum...
HFPM microfilter with G3" connection thread for use in areas with high corrosive environments. Filtration capacity up to 0.01 um. Maximum working pressure up to 50 bar, maximum...
HFPM microfilter with G3/4" connection thread for use in areas with high corrosive environments. Filtration capacity up to 0.01 um. Maximum working pressure up to 50 bar,...