Filtration, regulation and treatment of compressed air, Page 2
- Treatment units; basic units for air
- Industrial filtration; ISO 8573 - ISO 12500
- Air dryers; air moisture removal
- Pressure regulators; precision robust design
- Cyclone separators; cyclone filtration principle
- Water-oil separators; separates water from oil
Bestsellers
Cyclone separator CKLCHP2 with threaded connection 3/8". It enables inexpensive and effective removal of water and impurities from compressed air. Working pressure 250 bar,...
Filter insert for PVACM vacuum microfilter designed to protect vacuum pumps and vacuum pumps from solid impurities. Filtration capacity up to 0.01 um. Working pressure 20 to...
The TACM-23 small dry separator is designed to separate oil vapours from compressed air using activated carbon from the compressor up to a flow rate of 400 l/min at a maximum...
The TACM-35 small dry separator is designed to separate oil vapours from compressed air using activated carbon from the compressor up to a flow rate of 600 l/min at a maximum...
CHP1A activated carbon filter with G3/8" connection thread designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.01 um....
CHP2A activated carbon filter with G3/8" connection thread designed for effective removal of solid impurities, oil, water and other impurities from compressed air up to 0.01 um....
The IHP1A activated carbon filter with G3/8" connection thread effectively removes solid impurities, oil, odours and other impurities from compressed air up to 0.01 um. Maximum...
The IHP2A activated carbon filters with G3/8" connection thread effectively remove solid impurities, oil, odour and other impurities from compressed air up to 0.01 um. Maximum...
IHP4A activated carbon filters with G3/8" connection thread effectively remove solid impurities, oil, odors and other impurities from compressed air up to 0.01 um. Maximum...
The CHPB filter cartridge is used to remove the largest mechanical impurities from the compressed air. Sintered bronze insert with filtration capacity up to 15 μm. Operating...
The CHPR filter cartridge is used to remove the largest mechanical impurities from the compressed air. Acrylic fibre, cellulose liner with filtration capacity up to 1 μm....
The CHPS filter insert is used to remove mechanical impurities from compressed air. Borosilicate microfibre insert with a filtration capacity of up to 0.01 μm. Operating...
The IHPA-005V filter cartridge is used to remove the largest mechanical impurities from compressed air. Filtration capacity up to 0.01 um. Operating temperature from +1.5 to +65...
The IHPI-005V filter cartridge is used to remove the largest mechanical impurities from compressed air. Filtration capacity up to 5 um. Operating temperature from +1.5 to +65 °C.
The IHPM-005V filter cartridge is used to remove the largest mechanical impurities from compressed air. Filtration capacity up to 0.1 um. Operating temperature from +1.5 to +65 °C.
The IHPN-005V filter cartridge is used to remove the largest mechanical impurities from compressed air. Filtration capacity up to 25 um. Operating temperature from +1.5 to +65 °C.
The IHPS-005V filter cartridge is used to remove the largest mechanical impurities from compressed air. Filtration capacity up to 0.01 um. Operating temperature from +1.5 to +65...
Filter cartridge for medical vacuum filter MVAC-0046. Applications mainly in medical devices. Working pressure 20 to 2000 mbar, maximum flow up to 125 l/min.
The CHP1S microfilter with G3/8" connection thread is designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.01 um. Maximum...
SPFM microfilter with G3/8" connection thread for high efficiency filtration of compressed air, process air and industrial gases. Filtration capacity up to 0.01 um. Maximum...
The CHP2M microfilter with G3/8" connection thread is designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.1 um. Maximum...
The CHP2S microfilter with G3/8" connection thread is designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.01 um. Maximum...
The CHP4A microfilter with G3/8" connection thread is designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.01 um. Maximum...
The CHP4M microfilter with G3/8" connection thread is designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.1 um. Maximum...
The CHP4S microfilter with G3/8" connection thread is designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.01 um. Maximum...
The IHP1M microfilter with G3/8" connection thread effectively removes solid impurities, oil, odours and other impurities from compressed air up to 0.1 um. Maximum working...
Microfilter IHP1S with G3/8" connection thread for effective removal of solid impurities, oil, odour and other impurities from compressed air up to 0.01 um. Maximum working...
The IHP2M microfilter with G3/8" connection thread effectively removes solid impurities, oil, odours and other impurities from compressed air up to 0.1 um. Maximum working...
The IHP2S microfilter with G3/8" connection thread effectively removes solid impurities, oil, odours and other impurities from compressed air up to 0.01 um. Maximum working...
The IHP4M microfilter with G3/8" connection thread effectively removes solid impurities, oil, odours and other impurities from compressed air up to 0.1 um. Maximum working...
The IHP4S microfilter with G3/8" connection thread effectively removes solid impurities, oil, odours and other impurities from compressed air up to 0.01 um. Maximum working...
PFM microfilter with G3/8" connection thread for use in areas with high corrosive environments. Filtration capacity up to 0.1 um. Maximum working pressure is 16 bar, maximum...
PFS microfilter with G3/8" connection thread for use in areas with high corrosive environments. Filtration capacity up to 0.01 um. Maximum working pressure is 16 bar, maximum...
WFITM microfilter with G3/8" connection thread for use in areas with high corrosive environments. Filtration capacity up to 0.01 um. Maximum working pressure up to 16 bar,...
Pre-filter WFITI1 with G3/8" connection thread for use in areas with high corrosive environments. Filtration capacity up to 1 um. Maximum working pressure up to 16 bar, maximum...
CHP1P pre-filter with G3/8" connection thread designed for effective removal of solid impurities, oil, water and other impurities from compressed air up to 3 um. Maximum working...
CHP1R pre-filter with G3/8" connection thread designed for effective removal of solid impurities, oil, water and other impurities from compressed air up to 1 um. Maximum working...
CHP2P sintered filter with G3/8" connection thread designed for effective removal of solid impurities, oil, water and other impurities from compressed air up to 3 um. Maximum...
CHP2R pre-filter with G3/8" connection thread designed for effective removal of solid impurities, oil, water and other impurities from compressed air up to 1 um. Maximum working...
CHP4R pre-filter with G3/8" connection thread designed for effective removal of solid impurities, oil, water and other impurities from compressed air up to 1 um. Maximum working...