Filtration, regulation and treatment of compressed air, Page 2
-
Treatment units; basic units for air
-
Industrial filtration; ISO 8573 - ISO 12500
-
Air dryers; air moisture removal
-
Pressure regulators; precision robust design
-
Cyclone separators; cyclone filtration principle
-
Water-oil separators; separates water from oil
-hankison-susicka-vzduch-kompresor-tllak-kondenzace-rosny-bod.jpg)
Bestsellers
List of products
Replacement filter element CHPC-003V for cyclone separator CHP. It enables inexpensive and efficient removal of water and impurities from compressed air. Working pressure up to...
Replacement filter cartridge CHPB-003V with sintered bronze is used for coarse filtration to a purity of 15 um from compressed air. The maximum compressed air flow rate of the...
The replacement stainless steel filter cartridge IHPA-003V with activated carbon is used to absorb residual oil vapours and aerosols from compressed air to a level of 0.005...
The replacement filter cartridge CHPA-003V with activated carbon is used to absorb residual oil vapours and aerosols from compressed air to a level of 0.005 mg/m³. The maximum...
Replacement filter cartridge CHPM-003V made of borosilicate microfibre is used for fine filtration to a purity of 0.1 um from compressed air. The maximum compressed air flow...
Replacement filter cartridge CHPR-003V made of acrylic fibre, cellulose is used for dust filtration to a purity of 1 um from compressed air. The maximum compressed air flow rate...
Replacement filter insert CHPS-003V made of borosilicate microfibre is used for microfiltration to a purity of 0.01 um from compressed air. The maximum compressed air flow rate...
MADRY-12 membrane dryer with compressed air flow up to 12 m³/hr up to 12 bar. Including 2 filters through the dryer and filter cartridge clogging indication. Designed to supply...
MADRY-3 membrane dryer with compressed air flow up to 3 m³/hr up to 12 bar. Including 2 filters through the dryer and filter cartridge clogging indication. Designed to supply...
MADRY-6 membrane dryer with compressed air flow up to 6 m³/hr up to 12 bar. Including 2 filters through the dryer and filter cartridge clogging indication. Designed to supply...
MADRY-9 membrane dryer with compressed air flow up to 9 m³/hr up to 12 bar. Including 2 filters through the dryer and filter cartridge clogging indication. Designed to supply...
The CHP1S microfilter with G1/4" connection thread is designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.01 um. Maximum...
The CHP4S microfilter with G1/4" connection thread is designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.01 um. Maximum...
The CHP2S microfilter with G1/4" connection thread is designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.01 um. Maximum...
PFM microfilter with G1/4" connection thread for use in areas with high corrosive environments. Filtration capacity up to 0.1 um. Maximum working pressure is 16 bar, maximum...
PFS microfilter with G1/4" connection thread for use in areas with high corrosive environments. Filtration capacity up to 0.01 um. Maximum working pressure is 16 bar, maximum...
The SPFM microfilter with G1/4" connection thread is designed for highly efficient filtration of compressed air, process air and industrial gases. Filtration capacity up to 0.01...
WFITM microfilter with G1/4" connection thread for use in areas with high corrosive environments. Filtration capacity up to 0.01 um. Maximum working pressure up to 16 bar,...
CHP1M pre-filter with G1/4" connection thread designed for effective removal of solid impurities, oil, water and other impurities from compressed air up to 0.1 um. Maximum...
CHP2M pre-filter with G1/4" connection thread designed for effective removal of solid impurities, oil, water and other impurities from compressed air up to 0.1 um. Maximum...
CHP4M pre-filter with G1/4" connection thread designed for effective removal of solid impurities, oil, water and other impurities from compressed air up to 0.1 um. Maximum...
Pre-filter WFITI1 with G1/4" connection thread for use in areas with high corrosive environment. Filtration capacity up to 1 um. Maximum working pressure up to 16 bar, maximum...
PFI pre-filter with G1/4" connection thread for use in areas with high corrosive environments. Filtration capacity up to 1 um. Maximum working pressure is 16 bar, maximum flow...
Welded PFW pre-filter with G1/4" connection thread for use in areas with high corrosive environments. Filtration capacity up to 1 um. Maximum working pressure is 16 bar,...
The SPFN25 pre-filter with G1/4" connection thread is designed for highly efficient filtration of compressed air, process air and industrial gases. Filtration capacity up to 25...
The SPFN5 pre-filter with G1/4" connection thread is designed for highly efficient filtration of compressed air, process air and industrial gases. Filtration capacity up to 5...
WFITN pre-filter with G1/4" connection thread for use in areas with high corrosive environments. Filtration capacity up to 25 um. Maximum working pressure up to 16 bar, maximum...
Pre-filter WFITN5 with G1/4" connection thread for use in areas with high corrosive environments. Filtration capacity up to 5 um. Maximum working pressure up to 16 bar, maximum...
PFN25 screen filter with G1/4" connection thread for use in areas with high corrosive environments. Filtration capacity up to 25 um. Maximum working pressure is 16 bar, maximum...
CHP1B sintered coarse filter with G1/4" connection thread designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 15 um....
CHP2B sintered coarse filter with G1/4" connection thread designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 15 um....
CHP4B sintered coarse filter with G1/4" connection thread designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 15 um....
Stainless steel coarse filter IHP1N25 with connection thread G1/4" designed for effective removal of solid impurities, oil, water and other impurities from compressed air up...
Stainless steel coarse filter IHP2N25 with connection thread G1/4" designed for effective removal of solid impurities, oil, water and other impurities from compressed air up to...
Stainless steel coarse filter IHP4N25 with connection thread G1/4" designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to25...
Stainless steel cyclone separator IHP2 with 1/4" threaded connection. It enables inexpensive and efficient removal of water and impurities from compressed air. Working pressure...
Stainless steel cyclone separator IHP4 with 1/4" threaded connection. It enables inexpensive and efficient removal of water and impurities from compressed air. Working pressure...
The IHP1R stainless steel dust filter with G1/4" connection thread is designed to effectively remove dust, oil, water and other impurities from compressed air up to 1 um....
The IHP2R stainless steel dust filter with G1/4" connection thread is designed to effectively remove dust, oil, water and other impurities from compressed air up to 1 um....
The IHP4R stainless steel dust filter with G1/4" connection thread is designed to effectively remove dust, oil, water and other impurities from compressed air up to 1 um....