Filtration, regulation and treatment of compressed air, Page 18
- Treatment units; basic units for air
- Industrial filtration; ISO 8573 - ISO 12500
- Air dryers; air moisture removal
- Pressure regulators; precision robust design
- Cyclone separators; cyclone filtration principle
- Water-oil separators; separates water from oil
Bestsellers
The CHPP filter insert is used to remove mechanical impurities from compressed air. Acrylic fibre, cellulose liner with filtration capacity up to 3 μm. Operating temperature up...
Cyclone separator CSSS with flange connection DN65. It enables inexpensive and effective removal of water and impurities from compressed air. Working pressure 16 bar, working...
Removes mechanical contaminants up to 3 um in size according to ISO 8573-1 class 6. Connection with 2" internal pipe threads. Designed for flow rates up to 8233 l/min. Special...
CHP4P pre-filter with G1 1/2" connection thread designed for effective removal of solid impurities, oil, water and other impurities from compressed air up to 3 um. Maximum...
CHP4P pre-filter with G1 1/4" connection thread designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 3 um. Maximum working...
CHP4P pre-filter with G1" connection thread for effective removal of solid impurities, oil, water and other impurities from compressed air up to 3 um. Maximum working pressure...
CHP4P pre-filter with G1/2" connection thread designed for effective removal of solid impurities, oil, water and other impurities from compressed air up to 3 um. Maximum working...
CHP4P pre-filter with G1/4" connection thread designed for effective removal of solid impurities, oil, water and other impurities from compressed air up to 3 um. Maximum working...
CHP4P pre-filter with G2" connection thread for effective removal of solid impurities, oil, water and other impurities from compressed air up to 3 um. Maximum working pressure...
CHP4P pre-filter with G3/4" connection thread designed for effective removal of solid impurities, oil, water and other impurities from compressed air up to 3 um. Maximum working...
CHP4P pre-filter with G3/8" connection thread designed for effective removal of solid impurities, oil, water and other impurities from compressed air up to 3 um. Maximum working...
The CHPA filter insert is used to remove mechanical impurities from compressed air. Borosilicate microfibre insert with a filtration capacity of up to 0.01 μm. Operating...
The CHPS filter insert is used to remove mechanical impurities from compressed air. Borosilicate microfibre insert with a filtration capacity of up to 0.01 μm. Operating...
The CHPA filter insert is used to remove mechanical impurities from compressed air. Borosilicate microfibre insert with a filtration capacity of up to 0.01 μm. Operating...
The CHPS filter insert is used to remove mechanical impurities from compressed air. Borosilicate microfibre insert with a filtration capacity of up to 0.01 μm. Operating...
Cyclone separator CKLC with threaded connection G 1/2". It enables inexpensive and effective removal of water and impurities from compressed air. Working pressure 20 bar,...
Series of AISI316 stainless steel treatment units designed primarily for industrial applications in sectors such as food, chemical and petrochemical industries and laboratory...
Treatment units FUTURA, Shut-off, switching, filling, check valves, Designed for compressed air and for neutral gases, Design ATEX II 2G2D, Operating temperature -10°C to +50°C,...
The filter insert IHPR-007V is used to remove dusty mechanical impurities from compressed air. Filtration capacity up to 1 um. Operating temperature from +1.5 to +65 °C.
Filter cartridge for medical vacuum filter MVAC-0946V. Applications mainly in medical devices. Working pressure 20 to 2000 mbar, maximum flow up to 2083 l/min.
The HFB filter cartridge is used to remove the coarsest mechanical impurities from the compressed air. Sintered bronze insert with filtration capacity up to 15 μm. Working...
The IHPI-007V filter cartridge is used to remove the largest mechanical impurities from compressed air. Filtration capacity up to 5 um. Operating temperature from +1.5 to +65 °C.
The IHPN-007V filter cartridge is used to remove the largest mechanical impurities from compressed air. Filtration capacity up to 25 um. Operating temperature from +1.5 to +65 °C.
Removes microscopic mechanical impurities and oil from compressed air up to 0.01 um according to ISO 8573-1 class 1. Connection by internal pipe threads 1/2". The design allows...
Microfilter for compressed air from Hankison NGF series UF type according to ISO. Filter size F12 with 2" internal thread connection. The filter is equipped with a clogging...
Pressure regulator with 5 um air filtration for compressed air with or without oil and for neutral gases up to 16 bar. Design according to ATEX II 2G2D. The adjusting pin can be...
The CHPP filter insert is used to remove mechanical impurities from compressed air. Acrylic fibre, cellulose liner with filtration capacity up to 3 μm. Operating temperature up...
Adsorption dryer BDRY-1200 designed for continuous separation of water vapour from compressed air with a flow rate of up to 15,050 l/min at a maximum pressure of 16 bar and...
Pressure regulator with 5 um air filtration for compressed air with or without oil and for neutral gases up to 16 bar. Design according to ATEX II 2G2D. The adjusting pin can be...
Pressure regulator with 5 um air filtration for compressed air with or without oil and for neutral gases up to 16 bar. Design according to ATEX II 2G2D. The adjusting pin can be...
Pressure regulator with 5 um air filtration for compressed air with or without oil and for neutral gases up to 16 bar. Design according to ATEX II 2G2D. The adjusting pin can be...
Pressure regulator with 5 um air filtration for compressed air with or without oil and for neutral gases up to 16 bar. Design according to ATEX II 2G2D. The adjusting pin can be...
Pressure regulator with 5 um air filtration for compressed air with or without oil and for neutral gases up to 16 bar. Design according to ATEX II 2G2D. The adjusting pin can be...
Pressure regulator with 5 um air filtration for compressed air with or without oil and for neutral gases up to 16 bar. Design according to ATEX II 2G2D. The adjusting pin can be...
Pressure regulator with 5 um air filtration for compressed air with or without oil and for neutral gases up to 16 bar. Design according to ATEX II 2G2D. The adjusting pin can be...
Pressure regulator with 5 um air filtration for compressed air with or without oil and for neutral gases up to 16 bar. Design according to ATEX II 2G2D. The adjusting pin can be...
Pressure regulator with 5 um air filtration for compressed air with or without oil and for neutral gases up to 16 bar. Design according to ATEX II 2G2D. The adjusting pin can be...
Cyclone separator CKLC with threaded connection G 3/4". It enables inexpensive and effective removal of water and impurities from compressed air. Working pressure 20 bar,...
The CHPP filter insert is used to remove mechanical impurities from compressed air. Acrylic fibre, cellulose liner with filtration capacity up to 3 μm. Operating temperature up...
Pressure regulator with 5 um air filtration for compressed air with or without oil and for neutral gases up to 16 bar. Design according to ATEX II 2G2D. The adjusting pin can be...