Filtration, regulation and treatment of compressed air, Page 10
- Treatment units; basic units for air
- Industrial filtration; ISO 8573 - ISO 12500
- Air dryers; air moisture removal
- Pressure regulators; precision robust design
- Cyclone separators; cyclone filtration principle
- Water-oil separators; separates water from oil
Bestsellers
The BFM pre-filter insert is used to remove mechanical impurities and oil from the compressed air. Borosilicate microfibre insert with a filtration capacity of up to 0.1 μm....
The BFS microfiltration insert is used to remove mechanical impurities and oil from compressed air. Borosilicate microfibre insert with a filtration capacity of up to 0.01 μm....
Replacement dust filter cartridge with 1 µm filtration capacity for OMEGA AIR AAFR-2160. Recommended replacement 12 months or every 4,000 MH and when clogging of the filter...
Replacement fine filter cartridge with 0.1 µm filtration capacity for OMEGA AIR AAFM-2760 pre-filter. Recommended replacement 12 months or every 4,000 MH and when clogging of...
AAFP basic filter in 3" design to remove basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable container and...
Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...
AAFP 1" basic filter for removal of basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable container and designed...
Removes the coarsest mechanical dirt up to 15 um in size according to ISO 8573-1 class 7. Connection by internal pipe threads 1/2". Designed to allow flow rates up to 1187...
Removes mechanical contaminants up to 1 um in size according to ISO 8573-1 class 3. Connection by internal pipe threads 1/2". The design allows a flow rate of up to 1187 l/min....
Removes mechanical dirt up to 0.01 um and oil according to ISO 8573-1 class 1. Connection with 3/4" internal pipe threads. The design allows a flow rate of up to 1867 l/min....
Removes mechanical dirt up to 0.1 um and oil according to ISO 8573-1 class 2. Connection by internal pipe threads 1". The design allows a flow rate of up to 3400 l/min. Special...
Removes mechanical dirt up to 0.1 um and oil according to ISO 8573-1 class 2. Connection with 3/4" internal pipe threads. The design allows a flow rate of up to 1867 l/min....
Replacement basic filter cartridge with 3 µm filtration capacity for OMEGA AIR AAFP-1500 and AAFP-1680. Recommended replacement 12 months or every 4,000 MH and when clogging of...
Replacement microfiltration cartridge with filtration capacity 0,01 µm for OMEGA AIR AAFS-2760 microfilters. Recommended replacement 12 months or every 4,000 MH and when...
Replacement microfilter cartridge with filtration capacity of 0.01 µm for OMEGA AIR AAFS-1500 and AAFS-1680 microfilters. Recommended replacement 12 months or every 4,000 MH and...
Replacement fine filter cartridge with 0.1 µm filtration capacity for OMEGA AIR AAFM-1500 and AAFM-1680 pre-filters. Recommended replacement 12 months or every 4,000 MH and when...
Pressure regulator with 5 um air filtration for compressed air with or without oil and for neutral gases up to 16 bar. Design according to ATEX II 2G2D. The adjusting pin can be...
Service KIT 2 years of operation of the adsorption dryer Omega Air series ADRY-150 includes a replacement filter cartridge ;microfilter, dust filter and replacement silencer,...
After one year of operation, the service KIT for the Omega Air adsorption dryer series ADRY-150 to ADRY-200 includes a replacement microfilter cartridge, dust filter and...
Metal filter up to 18 bar with 20 µm cartridge and flow rate of 11,000 l/min in size 3 with 3/4" thread. Application mainly in industry, laboratory, measuring and control...
AAFR dust filter in 1 1/2" design to remove dust impurities up to 1 um from compressed air according to ISO 8573-1 class 3. Body with easily removable container and designed for...
Pressure regulator with 5 um air filtration for compressed air with or without oil and for neutral gases up to 16 bar. Design according to ATEX II 2G2D. The adjusting pin can be...
Water-oil separators chemically separate oil and solid impurities from the condensate from the water, which can then be discharged into the waste. They contribute to a high...
AAFA 1" activated carbon filter for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO 8573-1 class 1. Body with easily...
The ADRY-150 Series Adsorption Dryer was designed for continuous separation of water vapor from compressed air at flow rates up to 2,500 l/min. Reduces the pressure dew point...
AAFA 1" activated carbon filter for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO 8573-1 class 1. Body with easily...
Condensing compressed air dryer for dew point +5°C. Maximum inlet pressure is 13 bar with a flow rate of up to 75 m³/hr (1,250 l/min) and connection via G 3/4" male thread. The...
AAFR dust filter in 3/8" design to remove dust impurities up to 1 um from compressed air according to ISO 8573-1 class 3. Body with easily removable container and designed for a...
Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...
Replacement basic filter cartridge with 3 µm filtration capacity for OMEGA AIR AAFP-780 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...
AFR dust filters according to ISO 8573.1. Filtration capacity 1 um. AFR filters are designed for systems with high dust content, typically used as an outlet filter on adsorption...
Pilot air pressure regulator in metal design up to 18 bar. Remote compressed air control with a flow rate of 4,500 l/min in size 2 1/2" thread. Regulation range 0 - 12 bar....
AAFP basic filter in 1 1/2" design for removal of basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable...
Replacement fine filter cartridge with 0.1 µm filtration capacity for OMEGA AIR AAFM-335 pre-filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...
Replacement microfiltration cartridge with filtration capacity of 0.01 µm for OMEGA AIR AAFS-2160 microfilters. Recommended replacement 12 months or every 4,000 MH and when...
Complete unit in metal design up to 18 bar. Regulation, filtration, lubrication of compressed air with a flow rate of 700 l/min in size 1 with 1/4" thread. Regulation range 0 -...
AAFS microfilter in 3/8" design to remove micro impurities up to 0.01 um from compressed air according to ISO 8573-1 class 1. Body with easily removable container and designed...
Replacement basic filter cartridge with 3 µm filtration capacity for OMEGA AIR AAFP-1000 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...
AAFS microfilter in 3" design to remove micro impurities up to 0.01 um from compressed air according to ISO 8573-1 class 1. Body with easily removable container and designed for...
Electronic pressure gauge designed to check and monitor the condition of the filter cartridge. The condition of the filter cartridge is determined by the pressure gradient, the...