Filtration, regulation and treatment of compressed air

Compressed air treatment is an indispensable part of the compressor system. You need to treat compressed air because it naturally has dust particles, oil and, last but not least, condensate. This combination is very damaging to any device you connect to the compressor. Corrosion, clogging and sticking of moving parts shorten the life of valves, pneumatic tools and automated line components. That's why we bring you a comprehensive air treatment program that includes air dryers, filters, pressure regulators, separators and cyclone separators. With our air treatment program , you can extend the life of your entire compressor system many times over and avoid expensive service or line downtime. More on how to filter and condition air in the sequel.

#ShowMore#

Basic principles of air treatment:

What to follow - Compressed air quality classes according to ISO 8573-1

How do you know what quality of compressed air to have for your application? The ISO 8573-1 standard is the guideline. The quality of the produced air is described in the standard by seven classes, from 0 to 6. Each class has a prescribed maximum content of solids, water and oil. Different purity classes are therefore required for different applications and flow rates. For example, for workshop air, the standard prescribes a quality of 4-4-5. The three numbers indicate the three prescribed quality classes in the order - solids quality class, water quality class, oil quality class. The highest demands are of course in the pharmaceutical, chemical and food industries.
We talk in detail about the quality classes in our article from the advisory board: How to filter compressed air

Step-by-step air treatment

It is best to use an air dryerbehind the compressor to ensure that the condensate is removed. It is recommended to use a pre-filter between the air dryer and the compressor. There are different requirements for artisans and different requirements in a medical environment. Therefore, the purity of the air in microns needs to be determined. This filtration is then placed behind the dryer. Finally, we can regulate the compressed air to the desired pressure (atmospheres). All the accessories that we use to treat the air will wear out over time and the filter cartridges or granulate will need to be replaced. We use clogging indicators or differential pressure gauges to measure filter wear. This accessory can only be found on better filters for compressed air treatment.

More articles about air conditioning from our advice section:

Bestsellers

AOK20Bplovakovy odpoustec kondenzatu
1 758 Kč –1 %
AOK20B float release
Stock (20 pcs)
Code: AOK20B
Was: 1 758 Kč  (–1 %)
1 723 Kč
(1 424 Kč excl. VAT)
AWL Silencer - 1 1/4"
2 901 Kč –5 %
AWL Silencer - 1 1/4"
up to 14 days
Code: AWL-54
Was: 2 901 Kč  (–5 %)
2 756 Kč
(2 278 Kč excl. VAT)
Pressure regulator with metal filter up to 18 bar - 1/2"
2 003 Kč –2 %
Was: 2 003 Kč  (–2 %)
1 962 Kč
(1 621 Kč excl. VAT)
A2MR membrana jednotka vzduch regulator
190 Kč –5 %
Was: 190 Kč  (–5 %)
180 Kč
(149 Kč excl. VAT)
PDI16
702 Kč –1 %
Was: 702 Kč  (–1 %)
688 Kč
(569 Kč excl. VAT)
Compressed air treatment unit metal up to 18 bar - 1/2"
3 394 Kč –2 %
Was: 3 394 Kč  (–2 %)
3 326 Kč
(2 749 Kč excl. VAT)
A2L maznice olejovac vzduch velky
743 Kč –4 %
A2L-38 Air Oiler
Stock (11 pcs)
Code: A2L-38
Was: 743 Kč  (–4 %)
706 Kč
(583 Kč excl. VAT)
mounting bracket UUK1 - 1/4"
99 Kč –2 %
mounting bracket UUK1 - 1/4"
Stock (10 pcs)
Code: UUK1
Was: 99 Kč  (–2 %)
97 Kč
(80 Kč excl. VAT)
regulatory tlaku vzduchu fdr
6 733 Kč –5 %
Was: 6 733 Kč  (–5 %)
6 396 Kč
(5 286 Kč excl. VAT)
A2L maznice olejovac vzduch maly
455 Kč –5 %
A2L-14 Air Oiler
Stock (102 pcs)
Code: A2L-14
Was: 455 Kč  (–5 %)
432 Kč
(357 Kč excl. VAT)
33 items total
Filter insert SFS-018V
5 452 Kč –2 %
4 415 Kč excl. VAT
5 342 Kč / pcs

Replacement filter cartridge SFS-018V with filtration capacity less than 0.01 um including bacteria and microorganisms. Filters the smallest impurities from industrial gases,...

Code: SFS-018V
HDI (42 260) hankison susicka vzduch kompresor tllak kondenzace rosny bod
New
FREEFREE 66 748 Kč –8 %
50 751 Kč excl. VAT
61 409 Kč / pcs

The extremely quiet and dust-free operation of the compressed air condensation dryer up to a flow rate of 240 m³/hr from the compressor at a 3°C dew point enables use in...

Code: HDI-225
Filter cartridge PFN5 018V
Original parts
6 197 Kč –2 %
5 019 Kč excl. VAT
6 073 Kč / pcs

Replacement filter cartridge PFN5 for filter with filtration capacity up to 5 um and working pressure 16 bar. Operating temperature up to 150°C. Made of stainless steel strainer.

Code: PFN5-018V
Prefilter SPFN25 3/4"
41 152 Kč –2 %
33 330 Kč excl. VAT
40 329 Kč / pcs

The SPFN25 pre-filter with G3/4" connection thread is designed for highly efficient filtration of compressed air, process air and industrial gases. Filtration capacity up to 25...

Code: SPFN25-018
Filter insert PFIW1-018V
Original parts
6 197 Kč –2 %
5 019 Kč excl. VAT
6 073 Kč / pcs

Replacement filter cartridge PFIW1 for filters (PF, HPF) with filtration capacity up to 1 um, working pressure up to 50 bar and flow rate up to 3 750 l/min. Operating...

Code: PFIW1-018V
Filter insert PFM 018V
Original parts
5 256 Kč –2 %
4 257 Kč excl. VAT
5 151 Kč / pcs

Replacement filter cartridge PFM for filter with filtration capacity up to 0,1 um and working pressure 16 bar. Operating temperature up to 150°C. Made of borosilicate microfibers.

Code: PFM-018V
Active carbon filter HPFA G3/4"
43 912 Kč –2 %
35 565 Kč excl. VAT
43 034 Kč / pcs

HFPA activated carbon filter with G3/4" connection thread for use in high corrosive environments. Filtration capacity up to 0.01 um. Maximum working pressure up to 50 bar,...

Code: HPFA-018
Filter with sterile insert HPFS G3/4"
44 081 Kč –2 %
35 702 Kč excl. VAT
43 199 Kč / pcs

HFPA sterile cartridge filter with G3/4" connection thread for use in areas with high corrosive environments. Filtration capacity up to 0.01 um. Maximum working pressure up to...

Code: HPFSF-018
Prefilter PFW G3/4"
37 322 Kč –2 %
Prefilter PFW G3/4"
up to 14 days
30 228 Kč excl. VAT
36 576 Kč / pcs

Welded PFW pre-filter with G3/4" connection thread for use in areas with high corrosive environments. Filtration capacity up to 1 um. Maximum working pressure is 16 bar,...

Code: PFIW1-018
Screen filter PFN5 G3/4"
37 322 Kč –2 %
30 228 Kč excl. VAT
36 576 Kč / pcs

PFN5 screen filter with G3/4" connection thread for use in areas with high corrosive environments. Filtration capacity up to 5 um. Maximum working pressure up to 16 bar,...

Code: PFN5-018
Microfilter SPFM 3/4"
40 334 Kč –2 %
32 667 Kč excl. VAT
39 527 Kč / pcs

SPFM microfilter with G3/4" connection thread for high efficiency filtration of compressed air, process air and industrial gases. Filtration capacity up to 0.01 um. Maximum...

Code: SPFM-018
Prefilter SPFN5 3/4"
41 152 Kč –2 %
33 330 Kč excl. VAT
40 329 Kč / pcs

The SPFN5 pre-filter with G3/4" connection thread is designed for highly efficient filtration of compressed air, process air and industrial gases. Filtration capacity up to 5...

Code: SPFN5-018
Microfilter HPFM G3/4"
43 912 Kč –2 %
35 565 Kč excl. VAT
43 034 Kč / pcs

HFPM microfilter with G3/4" connection thread for use in areas with high corrosive environments. Filtration capacity up to 0.01 um. Maximum working pressure up to 50 bar,...

Code: HPFM-018
Microfilter WFIFM DN20
39 108 Kč –2 %
31 674 Kč excl. VAT
38 326 Kč / pcs

WFITM microfilter with DN20 flange connection for use in areas with high corrosive environments. Filtration capacity up to 0.01 um. Maximum working pressure up to 16 bar,...

Code: WFIFM-018
Microfilter WFITM G3/4"
36 505 Kč –2 %
29 566 Kč excl. VAT
35 775 Kč / pcs

WFITM microfilter with G3/4" connection thread for use in areas with high corrosive environments. Filtration capacity up to 0.01 um. Maximum working pressure up to 16 bar,...

Code: WFITM-018
Pre-filter WFIFI1 DN20
39 926 Kč –2 %
32 336 Kč excl. VAT
39 127 Kč / pcs

Prefilter WFITI1 with flange connection DN20 for use in areas with high corrosive environments. Filtration capacity up to 1 um. Maximum working pressure up to 16 bar, maximum...

Code: WFIFI1-018
Pre-filter WFIFN5 DN20
39 926 Kč –2 %
32 336 Kč excl. VAT
39 127 Kč / pcs

Pre-filter WFITN5 with flange connection DN20 for use in areas with high corrosive environments. Filtration capacity up to 5 um. Maximum working pressure up to 16 bar, maximum...

Code: WFIFN5-018
Pre-filter WFITI1 G3/4"
37 322 Kč –2 %
30 228 Kč excl. VAT
36 576 Kč / pcs

Prefilter WFITI1 with G3/4" connection thread for use in areas with high corrosive environment. Filtration capacity up to 1 um. Maximum working pressure up to 16 bar, maximum...

Code: WFITI1-018
Prefilter HPFI G3/4"
44 729 Kč –2 %
36 227 Kč excl. VAT
43 835 Kč / pcs

HFPI pre-filter with G3/4" connection thread for use in areas with high corrosive environments. Filtration capacity up to 20 um. Maximum working pressure up to 50 bar, maximum...

Code: HPFI20-018
Prefilter PFI G3/4"
37 322 Kč –2 %
Prefilter PFI G3/4"
up to 14 days
30 228 Kč excl. VAT
36 576 Kč / pcs

PFI pre-filter with G3/4" connection thread for use in areas with high corrosive environments. Filtration capacity up to 1 um. Maximum working pressure is 16 bar, maximum flow...

Code: PFI1-018
Prefilter WFITN5 G3/4"
37 322 Kč –2 %
30 228 Kč excl. VAT
36 576 Kč / pcs

Prefilter WFITN5 with G3/4" connection thread for use in areas with high corrosive environments. Filtration capacity up to 5 um. Maximum working pressure up to 16 bar, maximum...

Code: WFITN5-018
Sterile pre-filter SPFI1 3/4"
41 152 Kč –2 %
33 330 Kč excl. VAT
40 329 Kč / pcs

Sterile pre-filter SPFI1 with G3/4" connection thread for high efficiency filtration of compressed air, process air and industrial gases. Filtration capacity up to 1 um. Maximum...

Code: SPFI1-018
Filter SFS DN15
44 130 Kč –2 %
Filter SFS DN15
up to 14 days
35 741 Kč excl. VAT
43 247 Kč / pcs

The SFS filter with DN15 flange connection is designed for highly efficient filtration of compressed air, process air and industrial gases. Filtration capacity less than 0.01 um...

Code: SFS-018
Pre-filter WFIFN25 DN20
39 926 Kč –2 %
32 336 Kč excl. VAT
39 127 Kč / pcs

Pre-filter WFITN25 with flange connection DN20 for use in areas with high corrosive environments. Filtration capacity up to 25 um. Maximum working pressure up to 16 bar,...

Code: WFIFN25-018
Prefilter WFITN G3/4"
37 322 Kč –2 %
30 228 Kč excl. VAT
36 576 Kč / pcs

WFITN pre-filter with G3/4" connection thread for use in areas with high corrosive environments. Filtration capacity up to 25 um. Maximum working pressure up to 16 bar, maximum...

Code: WFITN25-018
Screen filter PFN25 G3/4"
37 322 Kč –2 %
30 228 Kč excl. VAT
36 576 Kč / pcs

PFN25 screen filter with G3/4" connection thread for use in areas with high corrosive environments. Filtration capacity up to 25 um. Maximum working pressure is 16 bar, maximum...

Code: PFN25-018
Sterile filter SPFS 3/4"
40 334 Kč –2 %
32 667 Kč excl. VAT
39 527 Kč / pcs

SPFS sterile filter with G3/4" connection thread for highly efficient filtration of compressed air, process air and industrial gases. Filtration capacity less than 0.01 um...

Code: SPFS-018
Filter insert PFI20 018V
Original parts
6 197 Kč –2 %
5 019 Kč excl. VAT
6 073 Kč / pcs

Replacement filter cartridge PFI20 for filter with filtration capacity up to 20 um and working pressure 16 bar. Operating temperature up to 150°C.

Code: PFI20-018V
Filter insert PFI1 018V
Original parts
6 197 Kč –2 %
5 019 Kč excl. VAT
6 073 Kč / pcs

Replacement filter cartridge PFI1 for filter with filtration capacity up to 1 um and working pressure 16 bar. Operating temperature up to 150°C. Made of stainless steel strainer.

Code: PFI1-018V
Filter insert PFN25 018V
Original parts
6 197 Kč –2 %
5 019 Kč excl. VAT
6 073 Kč / pcs

Replacement filter cartridge PFN25 for filter with filtration capacity up to 25 um and working pressure 16 bar. Operating temperature up to 150°C. Made of stainless steel strainer.

Code: PFN25-018V
Filter insert PFA 018V
Original parts
5 256 Kč –2 %
4 257 Kč excl. VAT
5 151 Kč / pcs

Replacement PFA filter cartridge for filter with filtration capacity up to 0,1 um and working pressure 16 bar. Operating temperature up to 150°C. Contains filtering activated...

Code: PFA-018V
Microfilter PFM G3/4"
36 505 Kč –2 %
29 566 Kč excl. VAT
35 775 Kč / pcs

PFM microfilter with G3/4" connection thread for use in areas with high corrosive environments. Filtration capacity up to 0.1 um. Maximum working pressure is 16 bar, maximum...

Code: PFM-018
Microfilter PFS G3/4"
36 505 Kč –2 %
29 566 Kč excl. VAT
35 775 Kč / pcs

PFS microfilter with G3/4" connection thread for use in areas with high corrosive environments. Filtration capacity up to 0.01 um. Maximum working pressure is 16 bar, maximum...

Code: PFS-018