Interchangeable nozzles for air blowing M12x1,25

Basic nozzle

Basic nozzle M12x1.25
  • basic nozzle with centrally located 1.5 mm diameter hole
  • concentrated air stream with high force
  • noise level up to 90 dB (A) at pressures up to 4 bar
Ordering
number
Thread Maximum pressure
bar
Diameter
mm
Flow rate
at 6 bar - l/min
GN-B M12x1.25 10 1,5 120 l/min

Soundproof nozzle

Soundproof nozzle M12x1.25
  • the nozzle is equipped with an internal sintered bronze insert that separates the air flow and slows it down, thus reducing noise
  • noise level only up to 70 dB (A) and very low blowing force
Ordering
number
Thread Maximum pressure
bar
Diameter
mm
Flow rate
at 6 bar - l/min
GN-S M12x1.25 10 - 280 l/min

Polyamide injector nozzle

Polyamide injector nozzle M12x1.25
  • nozzle with extreme performance by sucking and pulling air from the surrounding atmosphere into the air stream from the gun
  • lightweight polyamide design
Ordering
number
Thread Maximum pressure
bar
Diameter
mm
Flow rate
at 6 bar - l/min
GN-IP M12x1.25 10 2,0 370 l/min

Aluminum injector nozzle

Aluminum injector nozzle M12,125
  • nozzle with extreme performance by sucking and pulling air from the surrounding atmosphere into the air stream from the gun
  • aluminium design for higher mechanical resistance
Ordering
number
Thread Maximum pressure
bar
Diameter
mm
Flow rate
at 6 bar - l/min
GN-IA M12x1.25 10 2,5 320 l/min

Nozzle with air shield

Nozzle with air shield M12,125
  • nozzle equipped with a side drilling that splits the beam and creates a partly protective air shield preventing small debris from flying towards the operator
  • the formation of the shield is reflected in a slight reduction in nozzle power and an increase in air consumption
Ordering
number
Thread Maximum pressure
bar
Diameter
mm
Flow rate
at 6 bar - l/min
GN-T M12x1.25 10 - 340 l/min

Soundproof safety nozzle

Soundproof safety nozzle M12,1,25
  • combination of safety nozzle function with soundproof function
  • the nozzle forms a protective shield, preventing dirt from flying towards the operator
  • Noise reduction to 74 dB (A), several international certificates (OSHA,BIA,BG)
  • conical air routing inside the nozzle increases the blowing power up to 2.5 times
Ordering
number
Thread Maximum pressure
bar
Diameter
mm
Flow rate
at 6 bar - l/min
GN-SF M12x1.25 10 - 300 l/min

Extended nozzle

Extended nozzle M12,1,25
  • extended and curved nozzle for improved handling and reach during blowing
  • made of nickel-plated steel, nozzle diameter 2,3, bore 110 mm
Ordering
number
Thread Maximum pressure
bar
Diameter
mm
Flow rate
at 6 bar - l/min
GN-L M12x1.25 10 2,3 255 l/min

Extended nozzle with rubber protection

Extended nozzle with rubber protection M12,1,25
  • extended curved nozzle for improved handling and reach during blowing
  • made of nickel-plated steel, nozzle diameter 2,3 mm, length 110 mm
  • fitted with a rubber protective attachment at the nozzle end to protect the blown surface from mechanical damage
Ordering
number
Thread Maximum pressure
bar
Diameter
mm
Flow rate
at 6 bar - l/min
GN-LG M12x1.25 10 2,3 255 l/min

Extended safety nozzle with soundproofing

Prodloužená tryska s odhlučněním a bezpečnostní M12x1.25
  • extended curved nozzle for improved handling and reach during blowing
  • made of nickel-plated steel, nozzle diameter 2,3 mm, length 110 mm
  • combination of safety nozzle function with soundproof function
  • the nozzle creates a protective shield with a star-shaped profile to prevent dirt from flying off
  • noise reduction to 80 dB (A)
  • several international certificates of safe operation - OSHA, BIA, BG, 98/37EG
Ordering
number
Thread Maximum pressure
bar
Diameter
mm
Flow rate
at 6 bar - l/min
GN-LSF M12x1.25 10 2,3 240 l/min

Straight long nozzles

Straight long nozzles M12x1.25
  • long nozzles with straight profiles for improved handling and reach during blowing
  • different lengths for different customer needs
Ordering
number
Thread Length
mm
Maximum pressure
bar
Diameter
mm
Material
nozzles
Flow rate
at 6 bar - l/min
LNG-115 M12x1.25 115 10 3,0 nickel plated brass 360 l/min
GNL-165 M12x1.25 165 10 3,0 nickel plated brass 360 l/min
GNL-265 M12x1.25 265 10 3,0 nickel plated brass 360 l/min
GNL-415 M12x1.25 415 10 3,0 nickel plated brass 360 l/min
GNL-800 M12x1.25 800 10 2,3 nickel plated steel 255 l/min

Curved long nozzles

Curved long nozzles M12x1.25
  • long nozzles with curved end for improved handling and reach during blowing
  • different lengths for different customer needs
Ordering
number
Thread Length
mm
Maximum pressure
bar
Diameter
mm
Material
nozzles
Flow rate
at 6 bar - l/min
GNLB-110 M12x1.25 110 10 3,0 nickel plated brass 360 l/min
GNLB-160 M12x1.25 160 10 3,0 nickel plated brass 360 l/min
GNLB-260 M12x1.25 265 10 3,0 nickel plated brass 360 l/min
GNLB-800 M12x1.25 800 10 3,4 nickel plated steel 450 l/min

Valve for bicycles

Valve for bicycles M12x1.25
  • by mounting the valve on the bicycle, the blow gun can also be used for tyre inflation
Ordering
number
Thread Maximum pressure
bar
Material
nozzles
GN-TI M12x1.25 10 brass

The protective shield

The protective shield pro ofukovací pistole pro stlačený vzduch
  • the protective shield is designed to be mounted between the nozzle and the body of the blow gun
  • protects the hand during handling from flying dirt
Ordering
number
Diameter
mm
Material
nozzles
GN-PS 70 plastic

Regulated nozzle for air saving

Regulated nozzle for air saving M12x1.25
  • designed for optimal flow settings and specific user applications
  • simultaneous reduction of air consumption costs and noise reduction
  • can be connected to all guns with internal thread M12x1,25
  • body made of aluminium, other parts made of POM
Ordering
number
Thread Maximum pressure
bar
Length
mm
Diameter
mm
Weight
g
GN-R M12x1.25 10 57 2,3 22

Flat nozzles with 6 channels

Flat nozzles with 6 channels M12x1.25
  • flat nozzles for process blowing in industrial applications (e.g. cooling)
  • airflow distribution into 6 channels, flat shape of the blowing airflow
  • adapter made of aluminium, nozzle made of POM
Ordering
number
Thread Maximum pressure
bar
Length
mm
Width
mm
GNF6-M12 M12x1.25 6 82 27
GNF6-G14 G 1/4" 6 67 27

Flat nozzles with 16 channels

Flat nozzles with 16 channels M12x1.25
  • flat nozzles for process blowing in industrial applications (e.g. cooling)
  • airflow distribution into 16 channels, flat shape of the blowing airflow
  • adapter made of aluminium, nozzle made of POM
Ordering
number
Thread Maximum pressure
bar
Length
mm
Width
mm
GNF16-M12 M12x1.25 6 103 47
GNF16-G14 G 1/4" 6 90 47

Bestsellers

Protective shield for pistols
174 Kč –5 %
Protective shield for pistols
Stock (10 pcs)
Code: GN-PS
Was: 174 Kč  (–5 %)
165 Kč
(136 Kč excl. VAT)
Basic nozzle
55 Kč –5 %
Basic nozzle
Stock (29 pcs)
Code: GN-B
Was: 55 Kč  (–5 %)
52 Kč
(43 Kč excl. VAT)
Extended nozzle with noise reduction and safety M12x1.25
459 Kč –5 %
Was: 459 Kč  (–5 %)
436 Kč
(360 Kč excl. VAT)
Soundproof safety nozzle M12x1.25
712 Kč –5 %
Soundproof safety nozzle M12x1.25
Stock (10 pcs)
Code: GN-SF
Was: 712 Kč  (–5 %)
676 Kč
(559 Kč excl. VAT)
Nozzle with air shield M12x1.25
217 Kč –5 %
Nozzle with air shield M12x1.25
Stock (10 pcs)
Code: GN-T
Was: 217 Kč  (–5 %)
206 Kč
(170 Kč excl. VAT)
tryska plocha 16 kanalu vzdduch tlak ofuk pistole 3
1 126 Kč –5 %
Flat nozzles with 16 channels G1/4"
up to 20 days
Code: GNF16-G14
Was: 1 126 Kč  (–5 %)
1 069 Kč
(883 Kč excl. VAT)
Bent long nozzles 110 - M12x1.25
299 Kč –5 %
Bent long nozzles 110 - M12x1.25
Stock (9 pcs)
Code: GNLB-110
Was: 299 Kč  (–5 %)
284 Kč
(235 Kč excl. VAT)
Straight long nozzles 165 - M12x1.25
312 Kč –4 %
Straight long nozzles 165 - M12x1.25
Stock (10 pcs)
Code: GNL-165
Was: 312 Kč  (–4 %)
297 Kč
(245 Kč excl. VAT)
Injector nozzle made of aluminum M12x1.25
400 Kč –5 %
Was: 400 Kč  (–5 %)
380 Kč
(314 Kč excl. VAT)
Injector nozzle made of polyamide M12x1.25
209 Kč –5 %
Was: 209 Kč  (–5 %)
198 Kč
(164 Kč excl. VAT)
1 items total
Regulated air saving nozzle M12x1.25
Original parts
804 Kč –4 %
631 Kč excl. VAT
764 Kč / pcs

GN-R regulated air-saving nozzle designed for optimum flow adjustment for specific user applications. Simultaneous reduction of air consumption costs and noise reduction. Can be...

Code: GN-R