Proceed to cart
Customer support:311 532 091info@kompresory-vzduchotechnika.cz
    Currency
    CZK
    Language
    English
    Home / Pistol technique / Blow guns; guns and nozzles / Nozzles for blow guns; replacement nozzles M12x1,25

    Interchangeable nozzles for air blowing M12x1,25

    Basic nozzle
    Basic nozzle M12x1.25
    • basic nozzle with centrally located 1.5 mm diameter hole
    • concentrated air stream with high force
    • noise level up to 90 dB (A) at pressures up to 4 bar
    Ordering
    number    		 Thread Maximum pressure
    bar    		 Diameter
    mm    		 Flow rate
    at 6 bar - l/min
    GN-B M12x1.25 10 1,5 120 l/min

    Soundproof nozzle
    Soundproof nozzle M12x1.25
    • the nozzle is equipped with an internal sintered bronze insert that separates the air flow and slows it down, thus reducing noise
    • noise level only up to 70 dB (A) and very low blowing force
    Ordering
    number    		 Thread Maximum pressure
    bar    		 Diameter
    mm    		 Flow rate
    at 6 bar - l/min
    GN-S M12x1.25 10 - 280 l/min

    Polyamide injector nozzle
    Polyamide injector nozzle M12x1.25
    • nozzle with extreme performance by sucking and pulling air from the surrounding atmosphere into the air stream from the gun
    • lightweight polyamide design
    Ordering
    number    		 Thread Maximum pressure
    bar    		 Diameter
    mm    		 Flow rate
    at 6 bar - l/min
    GN-IP M12x1.25 10 2,0 370 l/min

    Aluminum injector nozzle
    Aluminum injector nozzle M12,125
    • nozzle with extreme performance by sucking and pulling air from the surrounding atmosphere into the air stream from the gun
    • aluminium design for higher mechanical resistance
    Ordering
    number    		 Thread Maximum pressure
    bar    		 Diameter
    mm    		 Flow rate
    at 6 bar - l/min
    GN-IA M12x1.25 10 2,5 320 l/min

    Nozzle with air shield
    Nozzle with air shield M12,125
    • nozzle equipped with a side drilling that splits the beam and creates a partly protective air shield preventing small debris from flying towards the operator
    • the formation of the shield is reflected in a slight reduction in nozzle power and an increase in air consumption
    Ordering
    number    		 Thread Maximum pressure
    bar    		 Diameter
    mm    		 Flow rate
    at 6 bar - l/min
    GN-T M12x1.25 10 - 340 l/min

    Soundproof safety nozzle
    Soundproof safety nozzle M12,1,25
    • combination of safety nozzle function with soundproof function
    • the nozzle forms a protective shield, preventing dirt from flying towards the operator
    • Noise reduction to 74 dB (A), several international certificates (OSHA,BIA,BG)
    • conical air routing inside the nozzle increases the blowing power up to 2.5 times
    Ordering
    number    		 Thread Maximum pressure
    bar    		 Diameter
    mm    		 Flow rate
    at 6 bar - l/min
    GN-SF M12x1.25 10 - 300 l/min

    Extended nozzle
    Extended nozzle M12,1,25
    • extended and curved nozzle for improved handling and reach during blowing
    • made of nickel-plated steel, nozzle diameter 2,3, bore 110 mm
    Ordering
    number    		 Thread Maximum pressure
    bar    		 Diameter
    mm    		 Flow rate
    at 6 bar - l/min
    GN-L M12x1.25 10 2,3 255 l/min

    Extended nozzle with rubber protection
    Extended nozzle with rubber protection M12,1,25
    • extended curved nozzle for improved handling and reach during blowing
    • made of nickel-plated steel, nozzle diameter 2,3 mm, length 110 mm
    • fitted with a rubber protective attachment at the nozzle end to protect the blown surface from mechanical damage
    Ordering
    number    		 Thread Maximum pressure
    bar    		 Diameter
    mm    		 Flow rate
    at 6 bar - l/min
    GN-LG M12x1.25 10 2,3 255 l/min

    Extended safety nozzle with soundproofing
    Prodloužená tryska s odhlučněním a bezpečnostní M12x1.25
    • extended curved nozzle for improved handling and reach during blowing
    • made of nickel-plated steel, nozzle diameter 2,3 mm, length 110 mm
    • combination of safety nozzle function with soundproof function
    • the nozzle creates a protective shield with a star-shaped profile to prevent dirt from flying off
    • noise reduction to 80 dB (A)
    • several international certificates of safe operation - OSHA, BIA, BG, 98/37EG
    Ordering
    number    		 Thread Maximum pressure
    bar    		 Diameter
    mm    		 Flow rate
    at 6 bar - l/min
    GN-LSF M12x1.25 10 2,3 240 l/min

    Straight long nozzles
    Straight long nozzles M12x1.25
    • long nozzles with straight profiles for improved handling and reach during blowing
    • different lengths for different customer needs
    Ordering
    number    		 Thread Length
    mm    		 Maximum pressure
    bar    		 Diameter
    mm    		 Material
    nozzles    		 Flow rate
    at 6 bar - l/min
    LNG-115 M12x1.25 115 10 3,0 nickel plated brass 360 l/min
    GNL-165 M12x1.25 165 10 3,0 nickel plated brass 360 l/min
    GNL-265 M12x1.25 265 10 3,0 nickel plated brass 360 l/min
    GNL-415 M12x1.25 415 10 3,0 nickel plated brass 360 l/min
    GNL-800 M12x1.25 800 10 2,3 nickel plated steel 255 l/min

    Curved long nozzles
    Curved long nozzles M12x1.25
    • long nozzles with curved end for improved handling and reach during blowing
    • different lengths for different customer needs
    Ordering
    number    		 Thread Length
    mm    		 Maximum pressure
    bar    		 Diameter
    mm    		 Material
    nozzles    		 Flow rate
    at 6 bar - l/min
    GNLB-110 M12x1.25 110 10 3,0 nickel plated brass 360 l/min
    GNLB-160 M12x1.25 160 10 3,0 nickel plated brass 360 l/min
    GNLB-260 M12x1.25 265 10 3,0 nickel plated brass 360 l/min
    GNLB-800 M12x1.25 800 10 3,4 nickel plated steel 450 l/min

    Valve for bicycles
    Valve for bicycles M12x1.25
    • by mounting the valve on the bicycle, the blow gun can also be used for tyre inflation
    Ordering
    number    		 Thread Maximum pressure
    bar    		 Material
    nozzles
    GN-TI M12x1.25 10 brass

    The protective shield
    The protective shield pro ofukovací pistole pro stlačený vzduch
    • the protective shield is designed to be mounted between the nozzle and the body of the blow gun
    • protects the hand during handling from flying dirt
    Ordering
    number    		 Diameter
    mm    		 Material
    nozzles
    GN-PS 70 plastic

    Regulated nozzle for air saving
    Regulated nozzle for air saving M12x1.25
    • designed for optimal flow settings and specific user applications
    • simultaneous reduction of air consumption costs and noise reduction
    • can be connected to all guns with internal thread M12x1,25
    • body made of aluminium, other parts made of POM
    Ordering
    number    		 Thread Maximum pressure
    bar    		 Length
    mm    		 Diameter
    mm    		 Weight
    g
    GN-R M12x1.25 10 57 2,3 22

    Flat nozzles with 6 channels
    Flat nozzles with 6 channels M12x1.25
    • flat nozzles for process blowing in industrial applications (e.g. cooling)
    • airflow distribution into 6 channels, flat shape of the blowing airflow
    • adapter made of aluminium, nozzle made of POM
    Ordering
    number    		 Thread Maximum pressure
    bar    		 Length
    mm    		 Width
    mm
    GNF6-M12 M12x1.25 6 82 27
    GNF6-G14 G 1/4" 6 67 27

    Flat nozzles with 16 channels
    Flat nozzles with 16 channels M12x1.25
    • flat nozzles for process blowing in industrial applications (e.g. cooling)
    • airflow distribution into 16 channels, flat shape of the blowing airflow
    • adapter made of aluminium, nozzle made of POM
    Ordering
    number    		 Thread Maximum pressure
    bar    		 Length
    mm    		 Width
    mm
    GNF16-M12 M12x1.25 6 103 47
    GNF16-G14 G 1/4" 6 90 47

    Bestsellers

    Protective shield for pistols
    174 Kč –5 %
    Protective shield for pistols
    Stock (10 pcs)
    Code: GN-PS
    Was: 174 Kč  (–5 %)
    165 Kč
    (136 Kč excl. VAT)
    Basic nozzle
    55 Kč –5 %
    Basic nozzle
    Stock (29 pcs)
    Code: GN-B
    Was: 55 Kč  (–5 %)
    52 Kč
    (43 Kč excl. VAT)
    Extended nozzle with noise reduction and safety M12x1.25
    459 Kč –5 %
    Extended nozzle with noise reduction and safety M12x1.25
    Stock (21 pcs)
    Code: GN-LSF
    Was: 459 Kč  (–5 %)
    436 Kč
    (360 Kč excl. VAT)
    Soundproof safety nozzle M12x1.25
    712 Kč –5 %
    Soundproof safety nozzle M12x1.25
    Stock (10 pcs)
    Code: GN-SF
    Was: 712 Kč  (–5 %)
    676 Kč
    (559 Kč excl. VAT)
    Nozzle with air shield M12x1.25
    217 Kč –5 %
    Nozzle with air shield M12x1.25
    Stock (10 pcs)
    Code: GN-T
    Was: 217 Kč  (–5 %)
    206 Kč
    (170 Kč excl. VAT)
    tryska plocha 16 kanalu vzdduch tlak ofuk pistole 3
    1 126 Kč –5 %
    Flat nozzles with 16 channels G1/4"
    Stock (6 pcs)
    Code: GNF16-G14
    Was: 1 126 Kč  (–5 %)
    1 069 Kč
    (883 Kč excl. VAT)
    Bent long nozzles 110 - M12x1.25
    299 Kč –5 %
    Bent long nozzles 110 - M12x1.25
    Stock (9 pcs)
    Code: GNLB-110
    Was: 299 Kč  (–5 %)
    284 Kč
    (235 Kč excl. VAT)
    Straight long nozzles 165 - M12x1.25
    312 Kč –4 %
    Straight long nozzles 165 - M12x1.25
    Stock (10 pcs)
    Code: GNL-165
    Was: 312 Kč  (–4 %)
    297 Kč
    (245 Kč excl. VAT)
    Injector nozzle made of aluminum M12x1.25
    400 Kč –5 %
    Injector nozzle made of aluminum M12x1.25
    Stock (10 pcs)
    Code: GN-IA
    Was: 400 Kč  (–5 %)
    380 Kč
    (314 Kč excl. VAT)
    Injector nozzle made of polyamide M12x1.25
    209 Kč –5 %
    Injector nozzle made of polyamide M12x1.25
    up to 20 days
    Code: GN-IP
    Was: 209 Kč  (–5 %)
    198 Kč
    (164 Kč excl. VAT)
    Show more products
    1 items total
    Regulated air saving nozzle M12x1.25
    Original parts
    804 Kč –4 %
    Regulated air saving nozzle M12x1.25
    Stock (1 pcs)
    631 Kč excl. VAT
    764 Kč / pcs

    GN-R regulated air-saving nozzle designed for optimum flow adjustment for specific user applications. Simultaneous reduction of air consumption costs and noise reduction. Can be...

    Code: GN-R