Interchangeable nozzles for air blowing M12x1,25

Basic nozzle
		basic nozzle with centrally located 1.5 mm diameter hole concentrated air stream with high force noise level up to 90 dB (A) at pressures up to 4 bar
Ordering number	Thread	Maximum pressure bar	Diameter mm	Flow rate at 6 bar - l/min
GN-B	M12x1.25	10	1,5	120 l/min

Soundproof nozzle
		the nozzle is equipped with an internal sintered bronze insert that separates the air flow and slows it down, thus reducing noise noise level only up to 70 dB (A) and very low blowing force
Ordering number	Thread	Maximum pressure bar	Diameter mm	Flow rate at 6 bar - l/min
GN-S	M12x1.25	10	-	280 l/min

Polyamide injector nozzle
		nozzle with extreme performance by sucking and pulling air from the surrounding atmosphere into the air stream from the gun lightweight polyamide design
Ordering number	Thread	Maximum pressure bar	Diameter mm	Flow rate at 6 bar - l/min
GN-IP	M12x1.25	10	2,0	370 l/min

Aluminum injector nozzle
		nozzle with extreme performance by sucking and pulling air from the surrounding atmosphere into the air stream from the gun aluminium design for higher mechanical resistance
Ordering number	Thread	Maximum pressure bar	Diameter mm	Flow rate at 6 bar - l/min
GN-IA	M12x1.25	10	2,5	320 l/min

Nozzle with air shield
		nozzle equipped with a side drilling that splits the beam and creates a partly protective air shield preventing small debris from flying towards the operator the formation of the shield is reflected in a slight reduction in nozzle power and an increase in air consumption
Ordering number	Thread	Maximum pressure bar	Diameter mm	Flow rate at 6 bar - l/min
GN-T	M12x1.25	10	-	340 l/min

Soundproof safety nozzle
		combination of safety nozzle function with soundproof function the nozzle forms a protective shield, preventing dirt from flying towards the operator Noise reduction to 74 dB (A), several international certificates (OSHA,BIA,BG) conical air routing inside the nozzle increases the blowing power up to 2.5 times
Ordering number	Thread	Maximum pressure bar	Diameter mm	Flow rate at 6 bar - l/min
GN-SF	M12x1.25	10	-	300 l/min

Extended nozzle
		extended and curved nozzle for improved handling and reach during blowing made of nickel-plated steel, nozzle diameter 2,3, bore 110 mm
Ordering number	Thread	Maximum pressure bar	Diameter mm	Flow rate at 6 bar - l/min
GN-L	M12x1.25	10	2,3	255 l/min

Extended nozzle with rubber protection
		extended curved nozzle for improved handling and reach during blowing made of nickel-plated steel, nozzle diameter 2,3 mm, length 110 mm fitted with a rubber protective attachment at the nozzle end to protect the blown surface from mechanical damage
Ordering number	Thread	Maximum pressure bar	Diameter mm	Flow rate at 6 bar - l/min
GN-LG	M12x1.25	10	2,3	255 l/min

Extended safety nozzle with soundproofing
		extended curved nozzle for improved handling and reach during blowing made of nickel-plated steel, nozzle diameter 2,3 mm, length 110 mm combination of safety nozzle function with soundproof function the nozzle creates a protective shield with a star-shaped profile to prevent dirt from flying off noise reduction to 80 dB (A) several international certificates of safe operation - OSHA, BIA, BG, 98/37EG
Ordering number	Thread	Maximum pressure bar	Diameter mm	Flow rate at 6 bar - l/min
GN-LSF	M12x1.25	10	2,3	240 l/min

Straight long nozzles
		long nozzles with straight profiles for improved handling and reach during blowing different lengths for different customer needs
Ordering number	Thread	Length mm	Maximum pressure bar	Diameter mm	Material nozzles	Flow rate at 6 bar - l/min
LNG-115	M12x1.25	115	10	3,0	nickel plated brass	360 l/min
GNL-165	M12x1.25	165	10	3,0	nickel plated brass	360 l/min
GNL-265	M12x1.25	265	10	3,0	nickel plated brass	360 l/min
GNL-415	M12x1.25	415	10	3,0	nickel plated brass	360 l/min
GNL-800	M12x1.25	800	10	2,3	nickel plated steel	255 l/min

Curved long nozzles
		long nozzles with curved end for improved handling and reach during blowing different lengths for different customer needs
Ordering number	Thread	Length mm	Maximum pressure bar	Diameter mm	Material nozzles	Flow rate at 6 bar - l/min
GNLB-110	M12x1.25	110	10	3,0	nickel plated brass	360 l/min
GNLB-160	M12x1.25	160	10	3,0	nickel plated brass	360 l/min
GNLB-260	M12x1.25	265	10	3,0	nickel plated brass	360 l/min
GNLB-800	M12x1.25	800	10	3,4	nickel plated steel	450 l/min

Valve for bicycles
		by mounting the valve on the bicycle, the blow gun can also be used for tyre inflation
Ordering number	Thread	Maximum pressure bar	Material nozzles
GN-TI	M12x1.25	10	brass

The protective shield
	the protective shield is designed to be mounted between the nozzle and the body of the blow gun protects the hand during handling from flying dirt
Ordering number	Diameter mm	Material nozzles
GN-PS	70	plastic

Regulated nozzle for air saving
		designed for optimal flow settings and specific user applications simultaneous reduction of air consumption costs and noise reduction can be connected to all guns with internal thread M12x1,25 body made of aluminium, other parts made of POM
Ordering number	Thread	Maximum pressure bar	Length mm	Diameter mm	Weight g
GN-R	M12x1.25	10	57	2,3	22

Flat nozzles with 6 channels
		flat nozzles for process blowing in industrial applications (e.g. cooling) airflow distribution into 6 channels, flat shape of the blowing airflow adapter made of aluminium, nozzle made of POM
Ordering number	Thread	Maximum pressure bar	Length mm	Width mm
GNF6-M12	M12x1.25	6	82	27
GNF6-G14	G 1/4"	6	67	27

Flat nozzles with 16 channels
		flat nozzles for process blowing in industrial applications (e.g. cooling) airflow distribution into 16 channels, flat shape of the blowing airflow adapter made of aluminium, nozzle made of POM
Ordering number	Thread	Maximum pressure bar	Length mm	Width mm
GNF16-M12	M12x1.25	6	103	47
GNF16-G14	G 1/4"	6	90	47

Bestsellers

174 Kč –5 %

Protective shield for pistols

(10 pcs)

Code: GN-PS

Was: 174 Kč (–5 %)

165 Kč

(136 Kč excl. VAT)

55 Kč –5 %

Basic nozzle

(29 pcs)

Code: GN-B

Was: 55 Kč (–5 %)

52 Kč

(43 Kč excl. VAT)

459 Kč –5 %

Extended nozzle with noise reduction and safety M12x1.25

(21 pcs)

Code: GN-LSF

Was: 459 Kč (–5 %)

436 Kč

(360 Kč excl. VAT)

712 Kč –5 %

Soundproof safety nozzle M12x1.25

(10 pcs)

Code: GN-SF

Was: 712 Kč (–5 %)

676 Kč

(559 Kč excl. VAT)

217 Kč –5 %

Nozzle with air shield M12x1.25

(10 pcs)

Code: GN-T

Was: 217 Kč (–5 %)

206 Kč

(170 Kč excl. VAT)

tryska plocha 16 kanalu vzdduch tlak ofuk pistole 3

1 126 Kč –5 %

Flat nozzles with 16 channels G1/4"

(6 pcs)

Code: GNF16-G14

Was: 1 126 Kč (–5 %)

1 069 Kč

(883 Kč excl. VAT)

299 Kč –5 %

Bent long nozzles 110 - M12x1.25

(9 pcs)

Code: GNLB-110

Was: 299 Kč (–5 %)

284 Kč

(235 Kč excl. VAT)

312 Kč –4 %

Straight long nozzles 165 - M12x1.25

(10 pcs)

Code: GNL-165

Was: 312 Kč (–4 %)

297 Kč

(245 Kč excl. VAT)

400 Kč –5 %

Injector nozzle made of aluminum M12x1.25

(10 pcs)

Code: GN-IA

Was: 400 Kč (–5 %)

380 Kč

(314 Kč excl. VAT)

209 Kč –5 %

Injector nozzle made of polyamide M12x1.25

Code: GN-IP

Was: 209 Kč (–5 %)

198 Kč

(164 Kč excl. VAT)

Show more products

9 items total

Original parts

312 Kč –4 %

Straight long nozzles 165 - M12x1.25

(10 pcs)

245 Kč excl. VAT

297 Kč / pcs

GNL-165 straight long nozzles with a straight profile for improved handling and reach during blowing. Nozzle length 165 mm.

Code: GNL-165

Original parts

299 Kč –5 %

Bent long nozzles 110 - M12x1.25

(9 pcs)

235 Kč excl. VAT

284 Kč / pcs

Curved long GNLB-110 nozzles with straight profiles for improved handling and reach during blowing. Nozzle length 110 mm.

Code: GNLB-110

Original parts

299 Kč –5 %

Curved long nozzles 160 - M12x1.25

(19 pcs)

235 Kč excl. VAT

284 Kč / pcs

Curved long GNLB-160 nozzles with straight profiles for improved handling and reach during blowing. Nozzle length 160 mm.

Code: GNLB-160

Original parts

299 Kč –5 %

Straight long nozzles 115 - M12x1.25

(14 pcs)

235 Kč excl. VAT

284 Kč / pcs

GNL-115 straight long nozzles with straight profile for improved handling and reach during blowing. Nozzle length 115 mm.

Code: GNL-115

Original parts

322 Kč –4 %

Bent long nozzles 260 - M12x1.25

(3 pcs)

253 Kč excl. VAT

306 Kč / pcs

Curved long GNLB-260 nozzles with straight profiles for improved handling and reach during blowing. Nozzle length 260 mm.

Code: GNLB-260

Original parts

322 Kč –4 %

Straight long nozzles 265 - M12x1.25

(13 pcs)

253 Kč excl. VAT

306 Kč / pcs

Straight long nozzles GNL-265 with straight profile for improved handling and reach during blowing. Nozzle length 265 mm.

Code: GNL-265

Original parts

919 Kč –5 %

Bent long nozzles 800 - M12x1.25

(2 pcs)

721 Kč excl. VAT

873 Kč / pcs

Curved long GNLB-800 nozzles with straight profiles for improved handling and reach during blowing. Nozzle length 800 mm.

Code: GNLB-800

Original parts

896 Kč –5 %

Straight long nozzles 800 - M12x1.25

(3 pcs)

703 Kč excl. VAT

851 Kč / pcs

GNL-800 straight long nozzles with straight profiles for improved handling and reach during blowing. Nozzle length 800 mm.

Code: GNL-800

Original parts

528 Kč –4 %

Straight long nozzles 415 - M12x1.25

(5 pcs)

415 Kč excl. VAT

502 Kč / pcs

GNL-415 straight long nozzles with straight profile for improved handling and reach during blowing. Nozzle length 415 mm.

Code: GNL-415

Login to your account

Interchangeable nozzles for air blowing M12x1,25

Basic nozzle

Soundproof nozzle

Polyamide injector nozzle

Aluminum injector nozzle

Nozzle with air shield

Soundproof safety nozzle

Extended nozzle

Extended nozzle with rubber protection

Extended safety nozzle with soundproofing

Straight long nozzles

Curved long nozzles

Valve for bicycles

The protective shield

Regulated nozzle for air saving

Flat nozzles with 6 channels

Flat nozzles with 16 channels

Bestsellers