#header { padding-top: 0; position: relative !important; top: 0; } .header-navigation { position: relative !important; } .overall-wrapper { margin: 0 !important; } body:not(.ready) { visibility: visible !important; }

You need to change a setting in your web browser

Please see: How to enable JavaScript in your browser.

If you use ad-blocking software, it may require you to allow JavaScript from this page.

Thank you.

Interchangeable nozzles for air blowing M12x1,25

Basic nozzle for blow guns
		basic nozzle with centrally located 1.5 mm diameter hole concentrated air stream with high force noise level up to 90 dB (A) at pressures up to 4 bar
Ordering number	Thread	Maximum pressure bar	Diameter mm	Flow rate at 6 bar - l/min
GN-B	M12x1.25	10	1,5	120 l/min

Soundproof nozzle for blow guns
		the nozzle is equipped with an internal sintered bronze insert that separates the air flow and slows it down, thus reducing noise noise level only up to 70 dB (A) and very low blowing force
Ordering number	Thread	Maximum pressure bar	Diameter mm	Flow rate at 6 bar - l/min
GN-S	M12x1.25	10	-	280 l/min

Polyamide injector nozzle for blow guns
		nozzle with extreme performance by sucking and pulling air from the surrounding atmosphere into the air stream from the gun lightweight polyamide design
Ordering number	Thread	Maximum pressure bar	Diameter mm	Flow rate at 6 bar - l/min
GN-IP	M12x1.25	10	2,0	370 l/min

Aluminium injector nozzle for blow guns
		nozzle with extreme performance by sucking and pulling air from the surrounding atmosphere into the air stream from the gun aluminium design for higher mechanical resistance
Ordering number	Thread	Maximum pressure bar	Diameter mm	Flow rate at 6 bar - l/min
GN-IA	M12x1.25	10	2,5	320 l/min

Nozzle with air shield for blow guns
		nozzle equipped with a side drilling that splits the beam and creates a partly protective air shield preventing small debris from flying towards the operator the formation of the shield is reflected in a slight reduction in nozzle power and an increase in air consumption
Ordering number	Thread	Maximum pressure bar	Diameter mm	Flow rate at 6 bar - l/min
GN-T	M12x1.25	10	-	340 l/min

Soundproof safety nozzle for blow guns
		combination of safety nozzle function with soundproof function the nozzle forms a protective shield, preventing dirt from flying towards the operator Noise reduction to 74 dB (A), several international certificates (OSHA,BIA,BG) conical air routing inside the nozzle increases the blowing power up to 2.5 times
Ordering number	Thread	Maximum pressure bar	Diameter mm	Flow rate at 6 bar - l/min
GN-SF	M12x1.25	10	-	300 l/min

Extended nozzle for blow guns
		extended and curved nozzle for improved handling and reach during blowing made of nickel-plated steel, nozzle diameter 2,3, bore 110 mm
Ordering number	Thread	Maximum pressure bar	Diameter mm	Flow rate at 6 bar - l/min
GN-L	M12x1.25	10	2,3	255 l/min

Extended nozzle with rubber protection for blow guns
		extended curved nozzle for improved handling and reach during blowing made of nickel-plated steel, nozzle diameter 2,3 mm, length 110 mm fitted with a rubber protective attachment at the nozzle end to protect the blown surface from mechanical damage
Ordering number	Thread	Maximum pressure bar	Diameter mm	Flow rate at 6 bar - l/min
GN-LG	M12x1.25	10	2,3	255 l/min

Extended safety nozzle with soundproofing for blow guns
		extended curved nozzle for improved handling and reach during blowing made of nickel-plated steel, nozzle diameter 2,3 mm, length 110 mm combination of safety nozzle function with soundproof function the nozzle creates a protective shield with a star-shaped profile to prevent dirt from flying off noise reduction to 80 dB (A) several international certificates of safe operation - OSHA, BIA, BG, 98/37EG
Ordering number	Thread	Maximum pressure bar	Diameter mm	Flow rate at 6 bar - l/min
GN-LSF	M12x1.25	10	2,3	240 l/min

Straight long nozzles for blow guns
		long nozzles with straight profiles for improved handling and reach during blowing different lengths for different customer needs
Ordering number	Thread	Length mm	Maximum pressure bar	Diameter mm	Material nozzles	Flow rate at 6 bar - l/min
LNG-115	M12x1.25	115	10	3,0	nickel plated brass	360 l/min
GNL-165	M12x1.25	165	10	3,0	nickel plated brass	360 l/min
GNL-265	M12x1.25	265	10	3,0	nickel plated brass	360 l/min
GNL-415	M12x1.25	415	10	3,0	nickel plated brass	360 l/min
GNL-800	M12x1.25	800	10	2,3	nickel plated steel	255 l/min

Curved long nozzles for blow guns
		long nozzles with curved end for improved handling and reach during blowing different lengths for different customer needs
Ordering number	Thread	Length mm	Maximum pressure bar	Diameter mm	Material nozzles	Flow rate at 6 bar - l/min
GNLB-110	M12x1.25	110	10	3,0	nickel plated brass	360 l/min
GNLB-160	M12x1.25	160	10	3,0	nickel plated brass	360 l/min
GNLB-260	M12x1.25	265	10	3,0	nickel plated brass	360 l/min
GNLB-800	M12x1.25	800	10	3,4	nickel plated steel	450 l/min

Bicycle valve for blow guns
		by mounting the valve on the bicycle, the blow gun can also be used for tyre inflation
Ordering number	Thread	Maximum pressure bar	Material nozzles
GN-TI	M12x1.25	10	brass

Protective shield for blow guns
	the protective shield is designed to be mounted between the nozzle and the body of the blow gun protects the hand during handling from flying dirt
Ordering number	Diameter mm	Material nozzles
GN-PS	70	jacket

Adjustable air-saving nozzle for blow guns
		designed for optimal flow settings and specific user applications simultaneous reduction of air consumption costs and noise reduction can be connected to all guns with internal thread M12x1,25 body made of aluminium, other parts made of POM
Ordering number	Thread	Maximum pressure bar	Length mm	Diameter mm	Weight g
GN-R	M12x1.25	10	57	2,3	22

Flat nozzles with 6 channels for blow guns
		flat nozzles for process blowing in industrial applications (e.g. cooling) airflow distribution into 6 channels, flat shape of the blowing airflow adapter made of aluminium, nozzle made of POM
Ordering number	Thread	Maximum pressure bar	Length mm	Width mm
GNF6-M12	M12x1.25	6	82	27
GNF6-G14	G 1/4"	6	67	27

Flat nozzles with 16 channels for blow guns
		flat nozzles for process blowing in industrial applications (e.g. cooling) airflow distribution into 16 channels, flat shape of the blowing airflow adapter made of aluminium, nozzle made of POM
Ordering number	Thread	Maximum pressure bar	Length mm	Width mm
GNF16-M12	M12x1.25	6	103	47
GNF16-G14	G 1/4"	6	90	47

Bestsellers

105 6 zakladni tryska M12x1,25

Basic nozzle

(103 pcs)

Code: GN-B

Was: 60 Kč (–10 %)

54 Kč

(45 Kč excl. VAT)

470 43 prodlouzena tryska ofuk kompresor bezpecnostni odhlucenena

Extended nozzle with noise reduction and safety M12x1.25

(13 pcs)

Code: GN-LSF

Was: 399 Kč (–5 %)

379 Kč

(313 Kč excl. VAT)

269 59 injektorova tryska ofuk kompresor kopie

Injector nozzle made of aluminum M12x1.25

(15 pcs)

Code: GN-IA

Was: 346 Kč (–4 %)

329 Kč

(272 Kč excl. VAT)

105 103 rovne dlouhe trysky ofuk kompresor

Straight long nozzles 165 - M12x1.25

(6 pcs)

Code: GNL-165

Was: 238 Kč (–5 %)

226 Kč

(187 Kč excl. VAT)

269 15 ochranny stit vzduch kompresor postole ofuk

Protective shield for pistols

(10 pcs)

Code: GN-PS

Was: 176 Kč (–4 %)

168 Kč

(139 Kč excl. VAT)

269 33 odhlucnena tryska kompresor ofuk

Silenced nozzle M12x1.25

(52 pcs)

Code: GN-S

Was: 347 Kč (–9 %)

313 Kč

(259 Kč excl. VAT)

tryska plocha 16 kanalu vzdduch tlak ofuk pistole 3

Flat nozzles with 16 channels G1/4"

Code: GNF16-G14

Was: 888 Kč (–5 %)

843 Kč

(697 Kč excl. VAT)

tryska plocha 16 kanalu vzdduch tlak ofuk pistole 3

Flat nozzles with 16 channels M12x1.25

(9 pcs)

Code: GNF16-M12

Was: 888 Kč (–5 %)

843 Kč

(697 Kč excl. VAT)

tryska plocha 6 kanalu vzdduch tlak ofuk pistole 1.png

Flat nozzles with 6 channels G1/4"

(6 pcs)

Code: GNF6-G14

Was: 670 Kč (–4 %)

637 Kč

(526 Kč excl. VAT)

tryska plocha 6 kanalu vzdduch tlak ofuk pistole 1.png

Flat nozzles with 6 channels M12x1.25

(6 pcs)

Code: GNF6-M12

Was: 688 Kč (–4 %)

654 Kč

(540 Kč excl. VAT)

Show more products

1 items total

269 15 ochranny stit vzduch kompresor postole ofuk

Protective shield for pistols

(10 pcs)

139 Kč excl. VAT

168 Kč / pcs

The GN-PS shield is designed for mounting between the nozzle and the body of the blow gun. It protects the hand from flying dirt during handling.

Code: GN-PS