Jetting guns SBG13

Code: SBG13

New

Not rated

6 080 Kč –5 %

SBG13 tryskaci pistole kvalita stlaceny vzduch kompresor

6 080 Kč –5 % 5 776 Kč / pcs 4 774 Kč excl. VAT

Delivery to: 13.01.2025

High-quality blast gun for rust removal by blasting with abrasive sand in areas where the surface cannot be sanded
and prepare it for painting. Designed for abrasives with grain sizes from 0.1 to 0.8 mm; version with connection to abrasive sand hopper via 1.5 m suction hose. Nozzle made of hardened steel with a diameter of 4 mm, air consumption at 7 bar is 325 l/min. Aluminium body with eye for hanging, lever control; connection via quick coupling DN 7.2.

Detailed information

SBG01A T tryskaci pistolemaradi vzduch kompresor tlak abrazivo

Original parts

689 Kč –4 %

Hardened steel replacement nozzle - SBG12-T

(8 pcs)

541 Kč excl. VAT

655 Kč

Replacement hardened steel nozzle for SBG12 gun. Designed for abrasives with grain sizes from 0.1 to 0.8 mm; version with 700 ml bottom plastic container for approx. 1 kg of...

Code: SBG12-T

New Original parts

663 Kč –3 %

Copper slag for blasting - ABR-MS25

(6 pcs)

531 Kč excl. VAT

643 Kč

Copper slag for blasting in 25kg pack. Use as an abrasive for blasting.

Code: ABR-MS25

Product detailed description

SBG13 high quality blasting gun

high quality blasting gun for rust removal by blasting with abrasive sand where the surface cannot be sanded
and prepare it for painting
for abrasives with grain sizes from 0.1 to 0.8 mm; version with connection to the abrasive sand hopper via a 1.5 m suction hose
4 mm diameter hardened steel nozzle, air consumption at 7 bar is 325 l/min
aluminium body with eye for hanging, lever operation; connection via quick coupling DN 7.2

Additional parameters

Category:	Blast gun with hose connection SBG13
Warranty:	2 years
Version:	Abrasive connection via 1.5 hose
Pressure:	7 bar
Connecting:	Nipple DN7.2
Container material:	Plastic
Materiál tělo:	Aluminium
Nozzle material:	Hardened steel
Medium:	grain size 0,1 to 0,8 mm
Air consumption:	325 l/min
Jet:	4.0 mm
Minimální tlak:	4 bar

SBG01A 1 tryskaci pistolemaradi vzduch kompresor tlak abrazivo

New Tip

659 Kč –2 %

Spray gun - SBG01A

(2 pcs)

529 Kč excl. VAT

640 Kč

The inexpensive blast gun is used to remove rust from metal surfaces by blasting with special sand with grains up to 0.8 mm, designed for blasting smaller areas. Design with...

Code: SBG01A

390 12 2 tryskaci pistole kvalita stlaceny vzduch kompresor (1)

Tip

6 191 Kč –5 %

SBG12 spray gun

4 860 Kč excl. VAT

5 881 Kč

Designed for abrasives with grain sizes from 0.1 to 0.8 mm; version with 700 ml bottom plastic container for approx. 1 kg of abrasive. Nozzle made of hardened steel with a...

Code: SBG12

SBG01C 1 tryskaci pistole kvalita stlaceny vzduch kompresor (1)

New

903 Kč –2 %

Spray gun in dust-free design - SBG01C

(15 pcs)

724 Kč excl. VAT

876 Kč

Dustless blast gun with different nozzle settings, 1 litre bottom tank, 200 l/min consumption and working pressure from 5.5 to 8 bar.

Code: SBG01C

280949 1400 1 t strikaci pistole tryska set (1)

223 Kč –99 %

Nozzle 2 mm - HGPS-T2

1 Kč excl. VAT

1 Kč

Replacement nozzle with a diameter of 2 mm for HGPS type high pressure washers. Operating temperature +5/+90 °C. Maximum pressure up to 20 bar.

Code: HGPS-T2

223 Kč –99 %

Nozzle 4 mm - HGPS-T4

1 Kč excl. VAT

1 Kč

Replacement nozzle with a diameter of 4 mm for HGPS type high pressure washers. Operating temperature +5/+90 °C. Maximum pressure up to 20 bar.

Code: HGPS-T4

ahlil ofukovaci kohouty vzduch kompresor tlak prodlouzene (1)

917 Kč –5 %

Blower cock extended AHL/IL - G3/8" - without nozzle

720 Kč excl. VAT

871 Kč

Robust blow-off taps for easy holding on the job and for continuous use in the toughest conditions. Made of aluminium, brass and stainless steel, working pressure 12 bar,...

Code: AHL38IL

Show all alternative products

Katalogový list (110.3 kB)

Be the first who will post an article to this item!

Add a rating

Be the first who will post an article to this item!

Add a comment

The ability to innovate has brought the company to the forefront

Gentilin is one of the other Italian manufacturers of compressors and components for compressed air. The company has had its headquarters for more than 30 years in Tirissino, located in one of the most famous industrial areas in Europe - Vicenza. Over the years, the company has developed into a competitive supplier that is continuously coming up with several innovative solutions of its own, such as special oil-free compressors, which are distinguished by their low noise level. This is testament to the ability of their in-house R&D department, which has brought the entire brand to the forefront of the world and given the products their uniqueness.

Each compressor is subject to a thorough inspection

Even for such a large company, which has locations in Europe as well as in America and Asia, the focus is primarily on the end customer. Teams of specialists make sure that the final product is of the highest quality and works exactly as it should for the user. The compressors are therefore assembled and tested directly by the manufacturer. Each machine must pass a demanding quality control before export, which allows the compressors to boast a long service life and the ability to work 24 hours a day without overheating.

Login to your account