Proceed to cart
Customer support:311 532 091info@kompresory-vzduchotechnika.cz
    Currency
    CZK
    Language
    English
    Home / Pistol technique / Blasting gun; blasting of trimmed surfaces / Blasting gun SBG01A; cheap version / Spray gun - SBG01A

    Spray gun - SBG01A

    Code: SBG01A
    New Tip
    Not rated
    Brand: Gentilin
    659 Kč –2 %
    SBG01A tryskací pistole kvalita stlaceny vzduch kompresor
    659 Kč –2 % 640 Kč / pcs 529 Kč excl. VAT
    Stock (4 pcs)
    Delivery to:
    20.11.2024

    The inexpensive blast gun is used to remove rust from metal surfaces by blasting with special sand with grains up to 0.8 mm, designed for blasting smaller areas. Design with aluminium bottom container. Aluminium body with eye for hanging, lever control. Highly abrasion-resistant steel nozzle with a diameter of 7 mm.

    Detailed information

    Related products

    7mm steel nozzle for SBG01A-T gun
    New Original parts
    132 Kč –3 %
    7mm steel nozzle for SBG01A-T gun
    Stock (6 pcs)
    106 Kč excl. VAT
    128 Kč

    Replacement nozzle 7 mm for blasting gun used for removing rust from metal surfaces by blasting with special sand with grain size up to 0.8 mm, designed for blasting smaller...

    Code: SBG01A-T
    Vessel under 750 ml - SBG01A-N
    New Original parts
    373 Kč –2 %
    Vessel under 750 ml - SBG01A-N
    Stock (10 pcs)
    299 Kč excl. VAT
    362 Kč

    Accessories for SG990S spray gun. Replacement container 750 ml in lower aluminium version.

    Code: SBG01A-N

    Product detailed description

    Cheap version of blasting gun - SBG01A

    • blasting gun is used for removing rust from metal surfaces by blasting with special sand with grain size up to 0.8 mm, designed for blasting smaller areas
    • design with aluminium bottom container; aluminium body with eye for hanging, lever operation
    • highly abrasion-resistant 7 mm steel nozzle; connection via quick coupling DN7.2

    Additional parameters

    Category: Spray gun SBG01A
    Version: Bottom container
    Pressure: 10 bars
    Connecting: Nipple DN7.2
    Container material: Aluminium
    Materiál tělo: Aluminium
    Medium: Compressed air
    Vessel volume: 1000 ml
    Jet: 7.0 mm
    SBG12 spray gun
    Tip
    3 905 Kč –99 %
    SBG12 spray gun
    up to 14 days
    1 Kč excl. VAT
    1 Kč

    Designed for abrasives with grain sizes from 0.1 to 0.8 mm; version with 700 ml bottom plastic container for approx. 1 kg of abrasive. Nozzle made of hardened steel with a...

    Code: SBG12
    SBG13 tryskací pistole kvalita stlaceny vzduch kompresor
    New
    4 149 Kč –99 %
    Jetting guns SBG13
    up to 14 days
    1 Kč excl. VAT
    1 Kč

    High-quality blast gun for rust removal by blasting with abrasive sand in areas where the surface cannot be sandedand prepare it for painting. Designed for abrasives with grain...

    Code: SBG13
    ahlil ofukovaci kohouty vzduch kompresor tlak prodlouzene (1)
    917 Kč –5 %
    Blower cock extended AHL/IL - G3/8" - without nozzle
    up to 20 days
    720 Kč excl. VAT
    871 Kč

    Robust blow-off taps for easy holding on the job and for continuous use in the toughest conditions. Made of aluminium, brass and stainless steel, working pressure 12 bar,...

    Code: AHL38IL
    280949 1400 1 t strikaci pistole tryska set (1)
    223 Kč –99 %
    Nozzle 2 mm - HGPS-T2
    up to 14 days
    1 Kč excl. VAT
    1 Kč

    Replacement nozzle with a diameter of 2 mm for HGPS type high pressure washers. Operating temperature +5/+90 °C. Maximum pressure up to 20 bar.

    Code: HGPS-T2
    280949 1400 1 t strikaci pistole tryska set (1)
    223 Kč –99 %
    Nozzle 4 mm - HGPS-T4
    up to 14 days
    1 Kč excl. VAT
    1 Kč

    Replacement nozzle with a diameter of 4 mm for HGPS type high pressure washers. Operating temperature +5/+90 °C. Maximum pressure up to 20 bar.

    Code: HGPS-T4
    Show all alternative products Previous product Next product

    Be the first who will post an article to this item!

    Do not fill out this field:

    Be the first who will post an article to this item!

    Do not fill out this field:

    The ability to innovate has brought the company to the forefront

    Gentilin is one of the other Italian manufacturers of compressors and components for compressed air. The company has had its headquarters for more than 30 years in Tirissino, located in one of the most famous industrial areas in Europe - Vicenza. Over the years, the company has developed into a competitive supplier that is continuously coming up with several innovative solutions of its own, such as special oil-free compressors, which are distinguished by their low noise level. This is testament to the ability of their in-house R&D department, which has brought the entire brand to the forefront of the world and given the products their uniqueness.

    		 immagine-azienda
    image001

    Each compressor is subject to a thorough inspection

    Even for such a large company, which has locations in Europe as well as in America and Asia, the focus is primarily on the end customer. Teams of specialists make sure that the final product is of the highest quality and works exactly as it should for the user. The compressors are therefore assembled and tested directly by the manufacturer. Each machine must pass a demanding quality control before export, which allows the compressors to boast a long service life and the ability to work 24 hours a day without overheating.