Compressed Air Moisture Removal Air Dryers OMEGA AIR, Page 2
- RDP condensation dryers; pressure dew point +3 °C
- RDL condensing dryers; pressure dew point +5°C
- AHD air dryers; pressure dew point +4°C
- Cool air dryers; pressure dew point +5°C
- MDX air dryers; pressure dew point +3°C
- ADRY air dryers; smaller adsorption -40°C
- BDRY air dryers; large adsorption -40°C
- MADRY air dryers; membrane -40°C
- Activated carbon columns; activated carbon separation
Bestsellers
Condensing compressed air dryer for dew point +5°C. The maximum inlet pressure is 13 bar with a flow rate of up to 100 m³/hr (1,666 l/min) and connection via a G 1" male thread....
After one year of operation, the service KIT for the Omega Air ADRY-60 to ADRY-75 series adsorption dryer includes a replacement microfilter cartridge, dust filter and...
After one year of operation, the ADRY-105 Series Omega Air Adsorption Dryer Service KIT includes a replacement microfilter cartridge, dust filter and replacement silencers for...
Dew point sensor including cable - for air saving regeneration - ADRY-OS. A-DRY dryers can operate in two operating modes depending on the settings of the control unit. Fixed...
Condensing compressed air dryer for dew point +5°C. Maximum inlet pressure is 13 bar with a flow rate of up to 35 m³/hr (583 l/min) and connection via external thread G 1/2"....
Adsorption dryers of the ADRY-6 to ADRY-36 series can be used with this wall mount kit. The kit is an original accessory from the manufacturer.
The ADRY-6 series adsorption dryer has been designed for continuous separation of water vapour from compressed air at flow rates up to 100 l/min. Reduces the pressure dew point...
Service KIT after 4 years of operation of the adsorption dryer Omega Air series ADRY-36 includes replacement filter cartridges, silencers, check valve, gaskets, valve kit,...
A-DRY adsorption dryers are equipped with the new generation ADC 4.0 electronic control unit. This version of the controller is easy to use and offers many innovative features....
Adsorption dryer BDRY-110 designed for permanent separation of water vapour from compressed air with a flow rate of up to 1 433 l/min at a maximum pressure of 16 bar and...
The ADRY-24 series adsorption dryer was designed for continuous separation of water vapour from compressed air at flow rates up to 400 l/min. Reduces the pressure dew point down...
After one year of operation, the Omega Air BDRY-1200 Series Adsorption Dryer Service KIT includes a replacement microfilter cartridge, dust filter and replacement silencers for...
The ADRY-60 series adsorption dryer was designed for continuous separation of water vapour from compressed air at flow rates up to 1,000 l/min. Reduces the pressure dew point...
The ADRY-75 Series Adsorption Dryer was designed for continuous separation of water vapor from compressed air at flow rates up to 1,250 l/min. Reduces the pressure dew point...
Adsorption dryer BDRY-150 designed for permanent separation of water vapour from compressed air with a flow rate of up to 1 958 l/min at a maximum pressure of 16 bar and...
MADRY-3 membrane dryer with compressed air flow up to 3 m³/hr up to 12 bar. Including 2 filters through the dryer and filter cartridge clogging indication. Designed to supply...
Adsorption dryer BDRY-1200 designed for continuous separation of water vapour from compressed air with a flow rate of up to 15,050 l/min at a maximum pressure of 16 bar and...
The BDRY-200 adsorption dryer is designed for continuous separation of water vapour from compressed air with a flow rate of up to 2,617 l/min at a maximum pressure of 16 bar and...
The BDRY-250 Adsorption Dryer is designed for continuous separation of water vapour from compressed air with a flow rate of up to 3,400 l/min at a maximum pressure of 16 bar and...
Adsorption dryer BDRY-300 designed for permanent separation of water vapour from compressed air with a flow rate of up to 4,183 l/min at a maximum pressure of 16 bar and...
Adsorption dryer BDRY-400 designed for permanent separation of water vapour from compressed air with a flow rate of up to 5 358 l/min at a maximum pressure of 16 bar and...
Adsorption dryer BDRY-600 designed for continuous separation of water vapour from compressed air with a flow rate of up to 7,708 l/min at a maximum pressure of 16 bar and...
Adsorption dryer BDRY-800 designed for permanent separation of water vapour from compressed air with a flow rate of up to 10 058 l/min at a maximum pressure of 16 bar and...
Service kit for the TAC-150 activated carbon column. Activated carbon is a material in the form of small pellets designed to purify compressed air and gases in adsorption...
Service kit for the TACM-6 activated carbon column. Activated carbon is a material in the form of small pellets designed to purify compressed air and gases in adsorption processes.
The TAC-1000 dry separator is designed to separate oil vapour from compressed air using activated carbon from the compressor up to a flow rate of 16,667 l/min at a maximum...
Dry separation TAC-110 designed for separation of oil vapours from compressed air by activated carbon from the compressor up to a flow rate of 1 833 l/min at a maximum pressure...
Dry separation TAC-150 designed for separation of oil vapours from compressed air by activated carbon from the compressor up to a flow rate of 2 500 l/min at a maximum pressure...
The TAC-200 dry separator is designed to separate oil vapours from compressed air using activated carbon from the compressor up to a flow rate of 3,333 l/min at a maximum...
Dry separation TAC-250 designed for separation of oil vapours from compressed air by activated carbon from the compressor up to a flow rate of 5 333 l/min at a maximum pressure...
Dry separation TAC-300 designed for separation of oil vapours from compressed air by activated carbon from the compressor up to a flow rate of 5 333 l/min at a maximum pressure...
Dry separation TAC-400 designed for separation of oil vapours from compressed air by activated carbon from the compressor up to a flow rate of 6 833 l/min at a maximum pressure...
The TAC-600 dry separator is designed to separate oil vapours from compressed air using activated carbon from the compressor up to a flow rate of 9,833 l/min at a maximum...
The TAC-800 dry separator is designed to separate oil vapours from compressed air using activated carbon from the compressor up to a flow rate of 12,833 l/min at a maximum...
The TACM-105 small dry separator is designed to separate oil vapours from compressed air using activated carbon from the compressor up to a flow rate of 1,950 l/min at a maximum...
The TACM-150 small dry separator is designed for separation of oil vapours from compressed air using activated carbon from the compressor up to a flow rate of 2,500 l/min at a...
The TACM-200 small dry separator is designed to separate oil vapours from compressed air using activated carbon from the compressor up to a flow rate of 3,333 l/min at a maximum...
The TACM-56 small dry separator is designed to separate oil vapours from compressed air using activated carbon from the compressor up to a flow rate of 1,250 l/min at a maximum...
The TACM-70 small dry separator is designed to separate oil vapours from compressed air using activated carbon from the compressor up to a flow rate of 1,250 l/min at a maximum...
Service kit for the TAC-400 activated carbon column. Activated carbon is a material in the form of small pellets designed to purify compressed air and gases in adsorption...