Dry separation with active carbon TACM-35

Code: TACM-35
FREEFREE 27 502 Kč –2 %
TACM separace aktivnim uhlim
27 502 Kč –2 % 26 952 Kč / pcs 22 274 Kč excl. VAT
up to 14 days
Delivery to:
13.01.2025

The TACM-35 small dry separator is designed to separate oil vapours from compressed air using activated carbon from the compressor up to a flow rate of 600 l/min at a maximum pressure of 16 bar. Connection internal pipe thread 3/8". A residual oil content of less than 0.003mg/m³ is class 0/1 for oil according to ISO 8573-1. Designed for industrial plants with high air quality requirements.

Detailed information

Product detailed description

TACM-35 Dry Compressed Air Oil Separator

  • activated carbon columns separate oil in the form of liquid and oil vapour from the compressed air
  • dry separation based on the principle of pressure adsorption on the surface and in the pores of activated carbon
  • body made of high quality carbon steel, flow control for constant delivery
  • residual oil content <0.003mg/m3; meets Class 0/1 for oil according to ISO 8573-1
  • operating temperature +1.5/+50 °C, working pressure 0-16 bar, low pressure gradient 20 mbar
  • recommended maintenance: check differential pressure once a month, change activated carbon cartridge once a year
  • designed for industrial enterprises with high demands on air quality - food industry, beverage industry, petrochemical industry, etc.
  • important note: for the use of TAC columns, a dust filter with a filtration capacity of 1 µm and a coalescing microfilter of 0.01 µm are required
  • reference conditions for flow measurement: temperature +20 °C, working pressure 7 bar. For conditions other than the reference, a correction factor must be used for the calculation - please contact our company.

SLOUPCE S AKTIVNÍM UHLÍM a separace oleje

Funkční principy Aktivní uhlí stlačený vzduch a kompresor

Technická data aktivního uhlí a separace vzduchu z kompresoru

Additional parameters

Category: Activated carbon columns TAC
Pressure: 16 bar
Connecting: 3/8"
Dimensions: 130 x 164 x 1 466 mm
Flow: 600 l/min
Service interval: 1x monthly differential pressure check
ISO class: 0/1 - ISO 8573.1
Equipment:: Activated carbon
Residual oil: 0.003 mg/m
Dryer type: Activated carbon

Be the first who will post an article to this item!

Do not fill out this field:

Be the first who will post an article to this item!

Do not fill out this field:

Alfa and Omega from Slovenia

Based in the Slovenian capital, Ljubljana, is a company specializing in compressed air treatment, production of industrial filters and filter cartridges, separators, or special membrane dryers, and other products. Omega Air was founded in 1988 as a family business and soon secured an essential place in its field. Over the years, with increasing production, the number of Omega Air employees also grew, and today the company employs more than 250 people.

stažený soubor
hannover

Omega's Products Find Use Everywhere

The products of Omega Air are characterized by a wide range of applications. Their products are used in heavy industry as well as by private entities. The Slovenian footprint is noticeable in industrial areas such as electronics, gastronomy, pharmacy, automotive, or even in the chemical industry sector. The company's main product is special filters, which are exported worldwide.

No Newcomer in the Field

Omega Air also boasts several innovations and patents of its own, which are developed in its R&D department. For its innovative solutions, the company has been awarded several times at the International Engineering Fair, traditionally held in Hannover, Germany.

The offered range of Omega Air products is brought to you by our company Kompresory vzduchotechnika below.

What Omega Air Produces:

  • special industrial filters
  • filter cartridges
  • electronic condensate drains
  • separators
  • dryers (adsorption, membrane)
  • active carbon columns