Spray gun

This category will be of particular interest to those of you who work in a paint shop and do the craft. We have several types of spray guns, according to your needs and habits - for painting, for decoration, for airbrush style. There is also a choice according to the nozzle. Select in the subcategories or read more about squirt guns in the continued description.

#ShowMore#

If you require a precise result when applying paint to a surface, the range of spray guns is not to be missed. Using them is simple. All you need is an air compressor, a hose and a work surface. Conventional spray guns work with pressures up to 6 Bar, low-pressure spray guns up to 2.5 Bar and HVLP spray guns up to just 0.7 Bar. You can see what this division means below:

Classification of spray guns by pressure

- high-pressure(common guns that have a higher dust content due to the high air pressure at the outlet)
- low pressure(lower dust due to lower outlet pressure, high air consumption)
- HVLP(lowest pressure, high efficiency, lowest dust, but also high air consumption)

How to apply paint correctly with a spray gun?

• Always use only suitable colours that you order appropriately
• Work with the correct air pressure for which the gun is designed and do not change it when spraying
• Keep the gun nozzle clean
• Wash and clean the gun immediately with water or thinner each time you spray
• Keep a constant distance from the surface when spraying
• Start and finish spraying outside the sprayed area to avoid spots

Classification of spray guns by nozzle size

• Spray gun for powder coating with nozzle 0,7 mm

• Spray gun for powder coating with 1.0 mm nozzle

• Spray gun for powder coating with 1.2 mm nozzle

• Spray gun for powder coating with 1.3 mm nozzle

• Spray gun for powder coating with 1.4 mm nozzle

• Spray gun for powder coating with 1.5 mm nozzle

• Spray gun for powder coating with 1.7 mm nozzle

• Spray gun for powder coating with 1.8 mm nozzle

• Spray gun for powder coating with 1.9 mm nozzle

• Spray gun for powder coating with nozzle 2,0 mm

• Spray gun for powder coating with nozzle 2,2 mm

Recommended nozzle diameters for different types of painting

• For priming - guns with nozzles from 1.2 to 1.3 mm
• For work with lacquers, acrylic paints and for finishing - nozzle from 1.4 to 1.5 mm
• Primers with large working grain and acrylic type 2K - nozzle from 1.5 to 1.7 mm

Other compressor accessories you may find useful for powder coating

• pressure regulators
• spiral hoses
• pressure hoses
• accessories for HVLP spray guns