Průmyslové vzduchové filtry ISO 8573 pro tlak 10 bar
Disponuje vaše kompresorová soustava provozním tlakem 10 bar? Přinášíme široké spektrum řešení, jak v této soustavě zlepšit kvalitu stlačeného vzduchu a ochránit tak všechny její komponenty před kondenzátem, olejovými výpary a mechanickými nečistotami. Průmyslové vzduchové filtry vyhovující normě ISO 8573 od výrobců Omega Air, B-Air, NGF a Mark patří mezi špičkové nástroje pro úpravu stlačeného vzduchu.
A pokud si s výběrem správného vzduchové filtru nevíte rady, mrkněte se do naší poradny na článek: Jak filtrovat stlačený vzduch
-
Omega air filters; pressure 16 to 64 bar
-
High pressure filters; 100 - 400 bar
-
NGF air filtration; including clogging indication
-
Stainless steel process filters; air and gas distribution
-
Sterile stainless steel filters; SFS and SPF filtration
-
.png)
Vacuum filters; filtration for vacuum
-
PPA filter system; for painting equipment
-
B-AIR filtration; for breathable air
-
Filters in AFS design; silicone-free filtration
-
Accessories for filters; inserts, indications,...
The SFS filter with DN100 flange connection is designed for highly efficient filtration of compressed air, process air and industrial gases. Filtration capacity less than 0.01...
The SFS filter with DN100 flange connection is designed for highly efficient filtration of compressed air, process air and industrial gases. Filtration capacity less than 0.01...
PFM microfilter with DN100 flange connection for use in areas with high corrosive environments. Filtration capacity up to 0.1 um. Maximum working pressure is 10 bar, maximum...
PFS microfilter with flange connection DN100 for use in areas with high corrosive environments. Filtration capacity up to 0.01 um. Maximum working pressure is 10 bar, maximum...
WFITM microfilter with DN100 flange connection for use in areas with high corrosive environments. Filtration capacity up to 0.01 um. Maximum working pressure up to 10 bar,...
PFI pre-filter with DN100 flange connection for use in areas with high corrosive environments. Filtration capacity up to 1 um. Maximum working pressure is 10 bar, maximum flow...
Replacement filter cartridge PFIW1 for filters (PF, HPF) with filtration capacity up to 1 um, working pressure up to 50 bar and flow rate up to 84,000 l/min. Operating...
Prefilter WFITI1 with flange connection DN100 for use in areas with high corrosive environments. Filtration capacity up to 1 um. Maximum working pressure up to 10 bar, maximum...
Pre-filter WFITN25 with flange connection DN100 for use in areas with high corrosive environments. Filtration capacity up to 25 um. Maximum working pressure up to 10 bar,...
Pre-filter WFITN5 with DN100 flange connection for use in areas with high corrosive environments. Filtration capacity up to 5 um. Maximum working pressure up to 10 bar, maximum...
PFN25 screen filter with DN100 flange connection for use in areas with high corrosive environments. Filtration capacity up to 25 um. Maximum working pressure is 10 bar, maximum...
PFN5 screen filter with DN100 flange connection for use in areas with high corrosive environments. Filtration capacity up to 5 um. Maximum working pressure is 10 bar, maximum...
PFN5 screen filter with DN100 flange connection for use in areas with high corrosive environments. Filtration capacity up to 5 um. Maximum working pressure is 10 bar, maximum...
PFN5 screen filter with DN150 flange connection for use in areas with high corrosive environments. Filtration capacity up to 5 um. Maximum working pressure is 10 bar, maximum...
PFN5 screen filter with DN150 flange connection for use in areas with high corrosive environments. Filtration capacity up to 5 um. Maximum working pressure is 10 bar, maximum...
PFN5 screen filter with DN200 flange connection for use in areas with high corrosive environments. Filtration capacity up to 5 um. Maximum working pressure is 10 bar, maximum...
PFN5 screen filter with DN200 flange connection for use in areas with high corrosive environments. Filtration capacity up to 5 um. Maximum working pressure is 10 bar, maximum...
