Industrial compressed air filters ISO 8573.1, Page 6
-
Omega air filters; 16 to 64 bar
-
High pressure filters CHP/IHP; carbon and stainless steel up to 400 bar
-
NGF air filtration; including clogging indication
-
Stainless steel process filters; air and gas distribution
-
Sterile stainless steel filters; SFS and SPF filtration
-
Vacuum filters; filtration for vacuum
-
PPA filter system; for painting equipment
-
B-AIR filtration; for breathable air
-
Filters in AFS design; silicone-free filtration
-
Accessories for filters; inserts, indications,...
Bestsellers

The simplest way to drain condensate from pressure vessels and filter vessels. Connection by thread, control of the firing by a rotary pin.

The AFS microfilter is used to remove the largest mechanical impurities from compressed air up to 0.01 um according to ISO 8573-1 class 1. Body with easily removable container...

Removes mechanical dirt up to 0.01 um and oil according to ISO 8573-1 class 1. Connection with 3/4" internal pipe threads. The design allows a flow rate of up to 1867 l/min....

Prefilter for compressed air from Hankison NGF series of HF type according to ISO. Filter size F04 with 1/2" female thread connection. The filter is equipped with a clogging...

Prefilter for compressed air from Hankison NGF series of HF type according to ISO. Filter size F02 with 1/4" female thread connection. The filter is equipped with a clogging...

AFM filters are used to remove the largest mechanical impurities from compressed air up to 0.1 um according to ISO 8573-1 class 2. Body with easily removable container and...

AFM filters are used to remove the largest mechanical impurities from compressed air up to 0.1 um according to ISO 8573-1 class 2. Body with easily removable container and...

Prefilter for compressed air from Hankison NGF series of HF type according to ISO. Filter size F07 with 3/4" female thread connection. The filter is equipped with a clogging...

Prefilter for compressed air from Hankison NGF series of HF type according to ISO. Filter size F06 with 3/4" female thread connection. The filter is equipped with a clogging...

Replacement basic filter cartridge with 3 µm filtration capacity for OMEGA AIR AAFP-1500 and AAFP-1680. Recommended replacement 12 months or every 4,000 MH and when clogging of...

Replacement basic filter cartridge with 3 µm filtration capacity for OMEGA AIR AAFP-2760 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...

Replacement basic filter cartridge with 3 µm filtration capacity for OMEGA AIR AAFP-1000 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...

Replacement catalytic filters (hopcalite) for OMEGA AIR - AAFH2-198. Suitable for removing CO andCO2 to the level of breathable air from compressed air according to ISO 8573-1...

Replacement fine filter cartridge with 0.1 µm filtration capacity for OMEGA AIR AAFM-2760 pre-filter. Recommended replacement 12 months or every 4,000 MH and when clogging of...

Replacement filter with activated carbon AAFA for OMEGA AIR AAFA-2760. Absorption of residual oil, oil vapours and aerosols with a content of < 0.005 mg/m³ from compressed air...

Replacement filter with activated carbon AAFA2 for OMEGA AIR AAFA2-780. Use as a filter to remove residual oil content of oil vapours and aerosols with < 0.005 mg/m3from...

Replacement microfilter cartridge with filtration capacity of 0.01 µm for OMEGA AIR AAFS-1500 and AAFS-1680 microfilters. Recommended replacement 12 months or every 4,000 MH and...

Replacement fine filter cartridge with 0.1 µm filtration capacity for OMEGA AIR AAFM-1000 pre-filter. Recommended replacement 12 months or every 4,000 MH and when clogging of...

Replacement filter with activated carbon AAFA for OMEGA AIR AAFA-1500 and AAFA-1680. Absorption of residual oil, oil vapours and aerosols with a content of < 0.005 mg/m³ from...

Replacement filter with activated carbon AAFA2 for OMEGA AIR AAFA2-510. Use as a filter to remove residual oil content of oil vapours and aerosols with < 0.005 mg/m3from...

Service kit for condensate evacuator IED for eelectronic IED triggers. The devices are primarily designed to drain condensed water from the filter vessels.

Kit for wall mounting and connecting filters. The set consists of two angles that are attached to the edges of the filter and allow subsequent mounting on the wall. Connecting...

Kit for wall mounting and connecting filters. The set consists of two angles that are attached to the edges of the filter and allow subsequent mounting on the wall. Connecting...

Kit for wall mounting and connecting filters. The set consists of two angles that are attached to the edges of the filter and allow subsequent mounting on the wall. Connecting...

Kit for wall mounting and connecting filters. The set consists of two angles that are attached to the edges of the filter and allow subsequent mounting on the wall. Connecting...

Kit for wall mounting and connecting filters. The set consists of two angles that are attached to the edges of the filter and allow subsequent mounting on the wall. Connecting...

Wall mounting kit. The set consists of angles that are attached to the edges of the filter and allow subsequent mounting on the wall. Fast and elegant installation that everyone...

Hankison 's NGF series SF type basic ISO compressed air filtration. Filter size F10 with 1 1/2" female threads. The filter is equipped with a clogging indicator and an automatic...

AAFC cyclone separator in 1/2" design with a flow rate of 1,300 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the...

AAFA activated carbon filter in 1/2" version for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO 8573-1 class 1....

Hankison filter cartridge for UF series air microfilter type F02. The filter insert is suitable for easy replacement by means of a thread in the filter. The maximum pressure of...

Filter insert for PVACP vacuum pre-filter designed to protect vacuum pumps and vacuum pumps from solid impurities. Filtration capacity up to 3 um. Working pressure 20 to 2000...

Filter insert for PVACP vacuum pre-filter designed to protect vacuum pumps and vacuum pumps from solid impurities. Filtration capacity up to 3 um. Working pressure 20 to 2000...

Filter insert for PVACP vacuum pre-filter designed to protect vacuum pumps and vacuum pumps from solid impurities. Filtration capacity up to 3 um. Working pressure 20 to 2000...

Filter insert for PVACP vacuum pre-filter designed to protect vacuum pumps and vacuum pumps from solid impurities. Filtration capacity up to 3 um. Working pressure 20 to 2000...

Prefilter for compressed air from Hankison NGF series of HF type according to ISO. Filter size F12 with 2" internal thread connection. The filter is equipped with a clogging...

Prefilter for compressed air from Hankison NGF series of HF type according to ISO. Filter size F17 with 3" female thread connection. The filter is equipped with a clogging...

Prefilter for compressed air from Hankison NGF series of HF type according to ISO. Filter size F16 with 3" internal thread connection. The filter is equipped with a clogging...

Prefilter for compressed air from Hankison NGF series of HF type according to ISO. Filter size F11 with 1 1/2" female threads. The filter is equipped with a clogging indicator...

Prefilter for compressed air from Hankison NGF series of HF type according to ISO. Filter size F15 with 2 1/2" female threads. The filter is equipped with a clogging indicator...