Industrial compressed air filters ISO 8573
Get rid of mechanical impurities and oil from compressed air efficiently with our extensive filtration programme. Not only will you get better quality compressed air to suit more applications, but you will also extend the life of many compressor system components. If the above matters to you, please feel free to explore our filtration category properly. You will find Omega Air filters, B-Air filters or NGF and Mark filters. We also offer new filter, catalyst and adsorption inserts for all filters. More about the whole program and filtering principles in the sequel.
#ShowMore#
Why is it necessary to filter compressed air?
The compressed air produced by your compressor - whether piston or screw - is not of good quality without post-treatment and is not suitable for many applications. This is because the compressor inlet filter only captures part of the mechanical impurities. However, they are not the only problem that degrades the quality of the produced air.
What does the produced compressed air contain?
- mechanical impurities
- humidity
- oil vapours (if it is an oil compressor)
This harmful triple combination is causing great trouble for any equipment that is connected to the compressor. Pneumatic tools - over time, they lose power and increase consumption, corrode inside, destroy seals, clog holes, become stuck and negatively affect the quality of work. Its lifetime is shortened many times over. Imagine what untreated compressed air can do to the individual components of a large automated line full of valves, cylinders and variously controlled moving parts. Shutting down a line for servicing can cost a company hundreds of thousands.
Compressed air quality
Compressed air quality is described in standardsiSO 8573-1 with seven classes, from 0 to 6. This guideline is crucial for every operator, as it sets out the exact quality requirements for different applications. Each class has a prescribed maximum content of solids, water and oil. We go into detail about this issue in this article, which will give you advice on how to choose water filters to connect behind your compressor: How to filter compressed air
In addition to the filters themselves, you may also be interested in:
- filter inserts for activated carbon filters
- filter inserts for microfilters
- filter inserts for dust filters
- catalytic filter inserts
- adsorption filter inserts
- air filter cartridge contamination indicators
Filters according to the quality class of solid impurities:
- quality class 1
- quality class 2
- quality class 3
- quality class 4
- quality class 5
- quality class 6
- quality class 7
Industrial filters divided according to condensate discharge:
- Omega air filters; pressure 16 to 64 bar
- High pressure filters; 100 - 400 bar
- NGF air filtration; including clogging indication
- Stainless steel process filters; air and gas distribution
- Sterile stainless steel filters; SFS and SPF filtration
- Vacuum filters; filtration for vacuum
- PPA filter system; for painting equipment
- B-AIR filtration; for breathable air
- Filters in AFS design; silicone-free filtration
- Accessories for filters; inserts, indications,...
Bestsellers
AAFC cyclone separator in 1/2" design with a flow rate of 1,300 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the...
AAFA activated carbon filter in 1/2" version for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO 8573-1 class 1....
Dust filter AAFR in 1/2" design to remove dust impurities up to 1 um from compressed air according to ISO 8573-1 class 3. Body with easily removable container and designed for a...
Replacement cyclone cartridge for liquid water filtration AAFC-78V. Recommended replacement 12 months or every 4,000 MH and upon indication of clogging of the filter element by...
AAFM 1/2" pre-filter for removing fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed for a flow...
AAFS 1/2" microfilter to remove micro impurities up to 0.01 um from compressed air according to ISO 8573-1 class 1. Body with easily removable container and designed for a flow...
Replacement fine filter cartridge with 0.1 µm filtration capacity for OMEGA AIR AAFM-78 pre-filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...
Replacement microfilter cartridge with filtration capacity 0,01 µm for OMEGA AIR AAFS-78 microfilters. Recommended replacement 12 months or every 4,000 MH and when clogging of...
AAFP basic filter in 1/2" design for removal of basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable container...
Replacement basic filter cartridge with 3 µm filtration capacity for OMEGA AIR AAFP-78 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...
Replacement filter with activated carbon AAFA2 for OMEGA AIR AAFA2-78. Use as a filter to remove residual oil content of oil vapours and aerosols with < 0.005 mg/m3from...
Replacement filter with activated carbon AAFA for OMEGA AIR AAFA-78. Use as a filter to remove residual oil content of oil vapours and aerosols with < 0.005 mg/m3from compressed...
Catalytic filters (hopcalite) AAFH2 in 1/2" design for removal of CO andCO2 to breathable air level according to ISO 8573-1 class 1. Body with easily removable container and...
Modular filter system PPA-207 for supplying clean air with a pre-supervised air dryer in ducts. Concept combining pre-filter, microfilter, pressure regulator and 2 quick...
Modular filtration system PPA-207C for clean air supply without air dryer in the ducts. Concept combining microfilter, cyclone separation, dryer, pressure regulator and quick...
PPA-307 modular filtration system for clean air supply with pre-set air dryer in ductwork. Concept combining microfilter, activated carbon, pressure regulator and 2 quick...
Modular filtration system PPA-307C for clean air supply without air dryer in the ducts. Concept combining cyclone separator, pre-filter, microfilter, pressure regulator and 2...
AAFB coarse filter in 1/2" design to remove the largest mechanical impurities up to 15 um from compressed air according to ISO 8573-1 class 7. Body with easily removable...
Replacement catalytic filters (hopcalite) for OMEGA AIR - AAFH2-78. Suitable for removing CO andCO2 to the level of breathable air from compressed air according to ISO 8573-1...
Capsule filter with AAFMS2 molecular sieve in 1/2" version designed as a fuse against moisture leakage into the air during shutdown of adsorption dryers according to ISO 8573-1...
Replacement filter with capsule and molecular sieve for OMEGA AIR - AAFH2-78. Designed as a fuse against moisture leakage into the air during shutdown of ISO 8573-1 class 1...
Adsorption filter with activated carbon AAFA2 in 1/2" version for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO...
Working pressure up to 16 bar, maximum flow rate 1300 l/min. Purity class according to ISO 8573.1 : Solid impurities -1, Oil - 1. Residual oil
The B-AIR breathable air filter with G1/2" connection thread is designed for a flawless supply of breathable atmosphere. The microfilter removes impurities down to 0.01 um....
Replacement dust filter cartridge with 1 µm filtration capacity for OMEGA AIR AAFR-78 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the filter...