Industrial compressed air filters ISO 8573.1
Get rid of mechanical impurities and oil from compressed air efficiently with our extensive filtration programme. Not only will you get better quality compressed air to suit more applications, but you will also extend the life of many compressor system components. If the above matters to you, please feel free to explore our filtration category properly. You will find Omega Air filters, B-Air filters or NGF and Mark filters. We also offer new filter, catalyst and adsorption inserts for all filters. More about the whole program and filtering principles in the sequel.
#ShowMore#
Why is it necessary to filter compressed air?
The compressed air produced by your compressor - whether piston or screw - is not of good quality without post-treatment and is not suitable for many applications. This is because the compressor inlet filter only captures part of the mechanical impurities. However, they are not the only problem that degrades the quality of the produced air.
What does the produced compressed air contain?
- mechanical impurities
- humidity
- oil vapours (if it is an oil compressor)
This harmful triple combination is causing great trouble for any equipment that is connected to the compressor. Pneumatic tools - over time, they lose power and increase consumption, corrode inside, destroy seals, clog holes, become stuck and negatively affect the quality of work. Its lifetime is shortened many times over. Imagine what untreated compressed air can do to the individual components of a large automated line full of valves, cylinders and variously controlled moving parts. Shutting down a line for servicing can cost a company hundreds of thousands.
Compressed air quality
Compressed air quality is described in standardsiSO 8573-1 with seven classes, from 0 to 6. This guideline is crucial for every operator, as it sets out the exact quality requirements for different applications. Each class has a prescribed maximum content of solids, water and oil. We go into detail about this issue in this article, which will give you advice on how to choose water filters to connect behind your compressor: How to filter compressed air
In addition to the filters themselves, you may also be interested in:
- filter inserts for activated carbon filters
- filter inserts for microfilters
- filter inserts for dust filters
- catalytic filter inserts
- adsorption filter inserts
- air filter cartridge contamination indicators
Filters according to the quality class of solid impurities:
- quality class 1
- quality class 2
- quality class 3
- quality class 4
- quality class 5
- quality class 6
- quality class 7
Industrial filters divided according to condensate discharge:
-
Omega air filters; 16 to 64 bar
-
High pressure filters CHP/IHP; carbon and stainless steel up to 400 bar
-
NGF air filtration; including clogging indication
-
Stainless steel process filters; air and gas distribution
-
Sterile stainless steel filters; SFS and SPF filtration
-
Vacuum filters; filtration for vacuum
-
PPA filter system; for painting equipment
-
B-AIR filtration; for breathable air
-
Filters in AFS design; silicone-free filtration
-
Accessories for filters; inserts, indications,...
Bestsellers

HFPA activated carbon filter with G1 1/4" connection thread for use in high corrosive environments. Filtration capacity up to 0.01 um. Maximum working pressure up to 50 bar,...

CHP1A activated carbon filter with G1 1/4" connection thread designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.005 um....

CHP2A activated carbon filter with G1 1/4" connection thread designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.005 um....

CHP4A activated carbon filter with G1 1/4" connection thread designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.005 um....

CHP1P basic filter with G1 1/4" connection thread designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 3 um. Maximum...

CHP2P basic filter with G1 1/4" connection thread designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 3 um. Maximum...

CHP4P basic filter with G1 1/4" connection thread designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 3 um. Maximum...

Basic stainless steel filter IHP1N5 with G1 1/4" connection thread designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 5...

Basic stainless steel filter IHP2N5 with G1 1/4" connection thread designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 5...

Basic stainless steel filter IHP4N5 with G1 1/4" connection thread designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 5...

Dust filter CHP1R with G1 1/4" connection thread designed to effectively remove dust, oil, water and other impurities from compressed air up to 1 um. Maximum working pressure up...

Dust filter CHP2R with G1 1/4" connection thread designed to effectively remove dust, oil, water and other impurities from compressed air up to 1 um. Maximum working pressure up...

Dust filter CHP4R with G1 1/4" connection thread designed to effectively remove dust, oil, water and other impurities from compressed air up to 1 um. Maximum working pressure up...

The IHPA-030V replacement stainless steel filter cartridge with activated carbon is used to absorb residual oil vapours and aerosols from compressed air to a level of 0.005...

The replacement filter cartridge CHPA-030V with activated carbon is used to absorb residual oil vapours and aerosols from compressed air to a level of 0.005 mg/m³. The maximum...

Replacement filter cartridge CHPB-030V with sintered bronze is used for coarse filtration to a purity of 15 um from compressed air. The maximum compressed air flow rate of the...

The replacement filter cartridge CHPM-030V made of borosilicate microfibre is used for fine filtration to a purity of 0.1 um from compressed air. The maximum compressed air flow...

Replacement filter cartridge CHPP-030V made of acrylic fibre, cellulose is used for basic filtration to 3 um purity of compressed air. The maximum compressed air flow rate of...

Replacement filter cartridge CHPR-030V made of acrylic fibre, cellulose is used for dust filtration to a purity of 1 um from compressed air. The maximum compressed air flow rate...

Replacement filter cartridge CHPS-030V made of borosilicate microfibre is used for microfiltration to a purity of 0.01 um from compressed air. The maximum compressed air flow...

HFPA sterile cartridge filter with G1 1/4" connection thread for use in high corrosive environments. Filtration capacity up to 0.01 um. Maximum working pressure up to 50 bar,...

The CHP1S microfilter with G1 1/4" connection thread is designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.01 um....

CHP2S microfilter with G1 1/4" connection thread designed for effective removal of solid impurities, oil, water and other impurities from compressed air up to 0.01 um. Maximum...

The CHP4S microfilter with G1 1/4" connection thread is designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.01 um....

HFPM microfilter with G1 1/4" connection thread for use in areas with high corrosive environments. Filtration capacity up to 0.01 um. Maximum working pressure up to 50 bar,...

PFM microfilter with G1 1/4" connection thread for use in areas with high corrosive environments. Filtration capacity up to 0.1 um. Maximum working pressure is 16 bar, maximum...

PFS microfilter with G1 1/4" connection thread for use in areas with high corrosive environments. Filtration capacity up to 0.01 um. Maximum working pressure is 16 bar, maximum...

SPFM microfilter with G1 1/4" connection thread for high efficiency filtration of compressed air, process air and industrial gases. Filtration capacity up to 0.01 um. Maximum...

WFITM microfilter with G1 1/4" connection thread for use in areas with high corrosive environments. Filtration capacity up to 0.01 um. Maximum working pressure up to 16 bar,...

CHP1M pre-filter with G1 1/4" connection thread designed for effective removal of solid impurities, oil, water and other impurities from compressed air up to 0.1 um. Maximum...

CHP2M pre-filter with connection thread G 11/4" designed for effective removal of solid impurities, oil, water and other impurities from compressed air up to 0,1 um. Maximum...

CHP4M pre-filter with G1 1/4" connection thread designed for effective removal of solid impurities, oil, water and other impurities from compressed air up to 0.1 um. Maximum...

HFPI pre-filter with G1 1/4" connection thread for use in areas with high corrosive environments. Filtration capacity up to 20 um. Maximum working pressure up to 50 bar,...

PFI pre-filter with G1 1/4" connection thread for use in areas with high corrosive environments. Filtration capacity up to 1 um. Maximum working pressure is 16 bar, maximum flow...

Welded PFW pre-filter with G1 1/4" connection thread for use in areas with high corrosive environments. Filtration capacity up to 1 um. Maximum working pressure is 16 bar,...

The SPFN25 pre-filter with G1 1/4" connection thread is designed for highly efficient filtration of compressed air, process air and industrial gases. Filtration capacity up to...

The SPFN5 pre-filter with G1 1/4" connection thread is designed for highly efficient filtration of compressed air, process air and industrial gases. Filtration capacity up to 5...

Pre-filter WFITI1 with G1 1/4" connection thread for use in areas with high corrosive environments. Filtration capacity up to 1 um. Maximum working pressure up to 16 bar,...

WFITN pre-filter with G1 1/4" connection thread for use in areas with high corrosive environments. Filtration capacity up to 25 um. Maximum working pressure up to 16 bar,...

Prefilter WFITN5 with G1 1/4" connection thread for use in areas with high corrosive environments. Filtration capacity up to 5 um. Maximum working pressure up to 16 bar, maximum...