Industrial compressed air filters ISO 8573
Get rid of mechanical impurities and oil from compressed air efficiently with our extensive filtration programme. Not only will you get better quality compressed air to suit more applications, but you will also extend the life of many compressor system components. If the above matters to you, please feel free to explore our filtration category properly. You will find Omega Air filters, B-Air filters or NGF and Mark filters. We also offer new filter, catalyst and adsorption inserts for all filters. More about the whole program and filtering principles in the sequel.
#ShowMore#
Why is it necessary to filter compressed air?
The compressed air produced by your compressor - whether piston or screw - is not of good quality without post-treatment and is not suitable for many applications. This is because the compressor inlet filter only captures part of the mechanical impurities. However, they are not the only problem that degrades the quality of the produced air.
What does the produced compressed air contain?
- mechanical impurities
- humidity
- oil vapours (if it is an oil compressor)
This harmful triple combination is causing great trouble for any equipment that is connected to the compressor. Pneumatic tools - over time, they lose power and increase consumption, corrode inside, destroy seals, clog holes, become stuck and negatively affect the quality of work. Its lifetime is shortened many times over. Imagine what untreated compressed air can do to the individual components of a large automated line full of valves, cylinders and variously controlled moving parts. Shutting down a line for servicing can cost a company hundreds of thousands.
Compressed air quality
Compressed air quality is described in standardsiSO 8573-1 with seven classes, from 0 to 6. This guideline is crucial for every operator, as it sets out the exact quality requirements for different applications. Each class has a prescribed maximum content of solids, water and oil. We go into detail about this issue in this article, which will give you advice on how to choose water filters to connect behind your compressor: How to filter compressed air
In addition to the filters themselves, you may also be interested in:
- filter inserts for activated carbon filters
- filter inserts for microfilters
- filter inserts for dust filters
- catalytic filter inserts
- adsorption filter inserts
- air filter cartridge contamination indicators
Filters according to the quality class of solid impurities:
- quality class 1
- quality class 2
- quality class 3
- quality class 4
- quality class 5
- quality class 6
- quality class 7
Industrial filters divided according to condensate discharge:
- Omega air filters; pressure 16 to 64 bar
- High pressure filters; 100 - 400 bar
- NGF air filtration; including clogging indication
- Stainless steel process filters; air and gas distribution
- Sterile stainless steel filters; SFS and SPF filtration
- Vacuum filters; filtration for vacuum
- PPA filter system; for painting equipment
- B-AIR filtration; for breathable air
- Filters in AFS design; silicone-free filtration
- Accessories for filters; inserts, indications,...
Bestsellers
Electronic timed condensate drain for compressed air systems up to 16 bar, operating on a time switching valve. External mounting on the filter body with 1/2" thread. Simple...
The simplest way to drain condensate from pressure vessels and filter vessels. Connection by thread, control of the firing by a rotary pin.
Electronic timed condensate drain for compressed air systems up to 50 bar, operating on a time switching valve. External mounting on the filter body with 1/2" thread. Simple...
Dust filter AAFR in 1/2" design to remove dust impurities up to 1 um from compressed air according to ISO 8573-1 class 3. Body with easily removable container and designed for a...
Electronic IEDs are primarily designed to drain condensed water from filter vessels. Equipped with LED indicator and test button. Operating temperature +1,5 °C to +65 °C,...
AAFS 1/2" microfilter to remove micro impurities up to 0.01 um from compressed air according to ISO 8573-1 class 1. Body with easily removable container and designed for a flow...
AAFM 1/2" pre-filter for removing fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed for a flow...
Adsorption filter with activated carbon AAFA2 in 1/2" version for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO...
Float-operated condensate drain valve for compressed air systems up to 20 bar. Version AOK20B for external mounting on the filter body with 1/2" thread.
Removes the coarsest mechanical dirt up to 15 um in size according to ISO 8573-1 class 7. Connection by internal pipe threads 1/2". Designed to allow flow rates up to 1187...
Removes mechanical contaminants up to 1 um in size according to ISO 8573-1 class 3. Connection by internal pipe threads 1/2". The design allows a flow rate of up to 1187 l/min....
AAFP basic filter in 1/2" design for removal of basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable container...
Removes mechanical dirt up to 0.01 um and oil according to ISO 8573-1 class 1. Connection by internal pipe threads 1/2". The design allows a flow rate of up to 1187 l/min....
AAFA activated carbon filter in 1/2" version for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO 8573-1 class 1....
AAFC cyclone separator in 1/2" design with a flow rate of 1,300 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the...
Catalytic filters (hopcalite) AAFH2 in 1/2" design for removal of CO andCO2 to breathable air level according to ISO 8573-1 class 1. Body with easily removable container and...
Electronic stainless steel timed condensate drain from compressed air system up to 16 bar, working on time switching valve. External mounting on the filter body with 1/2"...
Electronic timed condensate drain for compressed air systems up to 25 bar, operating on a time switching valve. External mounting on the filter body with 1/2" thread. Simple...
Electronic timed condensate drain for compressed air systems up to 150 bar, operating on a time switching valve. External mounting on the filter body with 1/2" thread. Simple...
Modular filter system PPA-207 for supplying clean air with a pre-supervised air dryer in ducts. Concept combining pre-filter, microfilter, pressure regulator and 2 quick...
Modular filtration system PPA-207C for clean air supply without air dryer in the ducts. Concept combining microfilter, cyclone separation, dryer, pressure regulator and quick...
PPA-307 modular filtration system for clean air supply with pre-set air dryer in ductwork. Concept combining microfilter, activated carbon, pressure regulator and 2 quick...
Modular filtration system PPA-307C for clean air supply without air dryer in the ducts. Concept combining cyclone separator, pre-filter, microfilter, pressure regulator and 2...
Float valve for condensate discharge from compressed air system working on float principle. Version AOK16B for internal mounting of filter vessels using 1/2" thread.
Prefilter for compressed air from Hankison NGF series of HF type according to ISO. Filter size F04 with 1/2" female thread connection. The filter is equipped with a clogging...
The filter insert IHPR-007V is used to remove dusty mechanical impurities from compressed air. Filtration capacity up to 1 um. Operating temperature from +1.5 to +65 °C.
Capsule filter with AAFMS2 molecular sieve in 1/2" version designed as a fuse against moisture leakage into the air during shutdown of adsorption dryers according to ISO 8573-1...
Removes microscopic mechanical impurities and oil from compressed air up to 0.01 um according to ISO 8573-1 class 1. Connection by internal pipe threads 1/2". The design allows...
Activated carbon filter CHP2A with G1/2" connection thread designed for effective removal of solid impurities, oil, water and other impurities from compressed air up to 0.01 um....
Hankison 's NGF series NGF type PF basic ISO compressed air filtration. Filter size F04 with 1/2" female thread connection. The filter is equipped with a clogging indicator and...
Adsorption filter with activated carbon for compressed air from Hankison NGF series type CF according to ISO. Filter size F04 with 1/2" female thread connection. The filter is...
Microfilter for compressed air from Hankison NGF series UF type according to ISO. Filter size F04 with 1/2" female thread connection. The filter is equipped with a clogging...
Float-operated condensate drain valve for compressed air systems up to 13 bar. Version AOK13PA for external mounting on the filter body with 1/2" thread.
The IEDC electronic skimmers with alarm output for remote monitoring and with the possibility of service connection for obtaining operating data from the device are primarily...
Designed to clean compressed air from mechanical impurities and oil up to 0.1 um according to ISO 8573-1 class 2. Connection by internal pipe threads 1/2". The design allows...
Designed to clean compressed air from mechanical impurities and oil up to 0.1 um according to ISO 8573-1 class 2. Connection by internal pipe threads 1/2". The design allows...
The CHPA filter insert is used to remove mechanical impurities from compressed air. Borosilicate microfibre insert with a filtration capacity of up to 0.01 μm. Operating...
Designed for cleaning compressed air of microscopic mechanical impurities and oil up to 0.01 um according to ISO 8573-1 class 1. Connection by internal pipe threads 1/2". The...
Designed for cleaning compressed air of microscopic mechanical impurities and oil up to 0.01 um according to ISO 8573-1 class 1. Connection by internal pipe threads 1/2". The...
AAFB coarse filter in 1/2" design to remove the largest mechanical impurities up to 15 um from compressed air according to ISO 8573-1 class 7. Body with easily removable...