Industrial compressed air filters ISO 8573
Get rid of mechanical impurities and oil from compressed air efficiently with our extensive filtration programme. Not only will you get better quality compressed air to suit more applications, but you will also extend the life of many compressor system components. If the above matters to you, please feel free to explore our filtration category properly. You will find Omega Air filters, B-Air filters or NGF and Mark filters. We also offer new filter, catalyst and adsorption inserts for all filters. More about the whole program and filtering principles in the sequel.
#ShowMore#
Why is it necessary to filter compressed air?
The compressed air produced by your compressor - whether piston or screw - is not of good quality without post-treatment and is not suitable for many applications. This is because the compressor inlet filter only captures part of the mechanical impurities. However, they are not the only problem that degrades the quality of the produced air.
What does the produced compressed air contain?
- mechanical impurities
- humidity
- oil vapours (if it is an oil compressor)
This harmful triple combination is causing great trouble for any equipment that is connected to the compressor. Pneumatic tools - over time, they lose power and increase consumption, corrode inside, destroy seals, clog holes, become stuck and negatively affect the quality of work. Its lifetime is shortened many times over. Imagine what untreated compressed air can do to the individual components of a large automated line full of valves, cylinders and variously controlled moving parts. Shutting down a line for servicing can cost a company hundreds of thousands.
Compressed air quality
Compressed air quality is described in standardsiSO 8573-1 with seven classes, from 0 to 6. This guideline is crucial for every operator, as it sets out the exact quality requirements for different applications. Each class has a prescribed maximum content of solids, water and oil. We go into detail about this issue in this article, which will give you advice on how to choose water filters to connect behind your compressor: How to filter compressed air
In addition to the filters themselves, you may also be interested in:
- filter inserts for activated carbon filters
- filter inserts for microfilters
- filter inserts for dust filters
- catalytic filter inserts
- adsorption filter inserts
- air filter cartridge contamination indicators
Filters according to the quality class of solid impurities:
- quality class 1
- quality class 2
- quality class 3
- quality class 4
- quality class 5
- quality class 6
- quality class 7
Industrial filters divided according to condensate discharge:
-
Omega air filters; pressure 16 to 64 bar
-
High pressure filters; 100 - 400 bar
-
NGF air filtration; including clogging indication
-
Stainless steel process filters; air and gas distribution
-
Sterile stainless steel filters; SFS and SPF filtration
-
.png)
Vacuum filters; filtration for vacuum
-
PPA filter system; for painting equipment
-
B-AIR filtration; for breathable air
-
Filters in AFS design; silicone-free filtration
-
Accessories for filters; inserts, indications,...
Bestsellers
Removes the coarsest mechanical dirt up to 15 um in size according to ISO 8573-1 class 7. Connection by internal pipe threads 1/2". Designed to allow flow rates up to 1187...
Replacement sintered bronze filter cartridge 15 µm for OMEGA AIR filter AAFB-198. Recommended replacement 12 months or every 4,000 MH and when clogging of the filter cartridge...
Replacement sintered bronze 15 µm filter cartridge for OMEGA AIR AAFB-1000 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the filter cartridge...
Replacement sintered bronze 15 µm filter cartridge for OMEGA AIR AAFB-78 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the filter cartridge is...
Replacement filter cartridge PFI20 for filter with filtration capacity up to 20 um and working pressure 16 bar. Operating temperature up to 150°C.
Replacement sintered bronze 15 µm filter cartridge for OMEGA AIR AAFB-120 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the filter cartridge...
The HFB filter cartridge is used to remove the coarsest mechanical impurities from the compressed air. Sintered bronze insert with filtration capacity up to 15 μm. Working...
The IHPN-007V filter cartridge is used to remove the largest mechanical impurities from compressed air. Filtration capacity up to 25 um. Operating temperature from +1.5 to +65 °C.
Replacement filter cartridge PFN25 for filter with filtration capacity up to 25 um and working pressure 16 bar. Operating temperature up to 150°C. Made of stainless steel strainer.
Designed to clean compressed air from the coarsest mechanical impurities up to 15 um according to ISO 8573-1 class 7. Connection with 3/4" internal pipe threads. The design...
Replacement sintered bronze 15 µm filter cartridge for OMEGA AIR AAFB-335 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the filter cartridge...
Replacement sintered bronze 15 µm filter cartridge for OMEGA AIR AAFB-510 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the filter cartridge...
The filters are used to remove the largest mechanical impurities from compressed air up to 15 um according to ISO 8573-1 class 7. Connection by flange with DN80 clearance....
The filters are used to remove the largest mechanical impurities from compressed air up to 15 um according to ISO 8573-1 class 7. Connection by flange with DN100 clearance. The...
The filters are used to remove the largest mechanical impurities from compressed air up to 15 um according to ISO 8573-1 class 7. Connection by flange with DN125 clearance....
The filters are used to remove the largest mechanical impurities from compressed air up to 15 um according to ISO 8573-1 class 7. Connection by flange with DN150 clearance....
The CHPB filter cartridge is used to remove the largest mechanical impurities from the compressed air. Sintered bronze insert with filtration capacity up to 15 μm. Operating...
The CHPB filter cartridge is used to remove the largest mechanical impurities from the compressed air. Sintered bronze insert with filtration capacity up to 15 μm. Operating...
The HFB filter cartridge is used to remove the coarsest mechanical impurities from the compressed air. Sintered bronze insert with filtration capacity up to 15 μm. Working...
Replacement filter cartridge PFI20 for filter with filtration capacity up to 20 um and working pressure 16 bar. Operating temperature up to 150°C.
The IHPN-005V filter cartridge is used to remove the largest mechanical impurities from compressed air. Filtration capacity up to 25 um. Operating temperature from +1.5 to +65 °C.
AAFB 1" coarse filter for removal of the largest mechanical impurities up to 15 um from compressed air according to ISO 8573-1 class 7. Body with easily removable container and...
AAFB 1" coarse filter for removal of the largest mechanical impurities up to 15 um from compressed air according to ISO 8573-1 class 7. Body with easily removable container and...
The IHPN-003V filter cartridge is used to remove the largest mechanical impurities from compressed air. Filtration capacity up to 25 um. Operating temperature from +1.5 to +65 °C.
The HFB filter cartridge is used to remove the coarsest mechanical impurities from the compressed air. Sintered bronze insert with filtration capacity up to 15 μm. Working...
AAFB coarse filter in 1 1/2" design to remove the largest mechanical impurities up to 15 um from compressed air according to ISO 8573-1 class 7. Body with easily removable...
Replacement filter cartridge PFI20 for filter with filtration capacity up to 20 um and working pressure 16 bar. Operating temperature up to 150°C.
The CFB filter cartridge is used to remove the largest mechanical impurities from the compressed air. Sintered bronze insert with filtration capacity up to 15 μm. Working...
AAFB coarse filter in 1 1/2" design to remove the largest mechanical impurities up to 15 um from compressed air according to ISO 8573-1 class 7. Body with easily removable...
AAFB coarse filter in 2 1/2" design to remove the largest mechanical impurities up to 15 um from compressed air according to ISO 8573-1 class 7. Body with easily removable...
AAFB 2" coarse filter for removal of the largest mechanical impurities up to 15 um from compressed air according to ISO 8573-1 class 7. Body with easily removable container and...
AAFB 2" coarse filter for removal of the largest mechanical impurities up to 15 um from compressed air according to ISO 8573-1 class 7. Body with easily removable container and...
AAFB 3" coarse filter to remove the largest mechanical impurities up to 15 um from compressed air according to ISO 8573-1 class 7. Body with easily removable container and...
AAFB 3" coarse filter to remove the largest mechanical impurities up to 15 um from compressed air according to ISO 8573-1 class 7. Body with easily removable container and...
The CFB filter cartridge is used to remove the largest mechanical impurities from the compressed air. Sintered bronze insert with filtration capacity up to 15 μm. Working...
The CFB filter cartridge is used to remove the largest mechanical impurities from the compressed air. Sintered bronze insert with filtration capacity up to 15 μm. Working...
Replacement filter cartridge PFN25 for filter with filtration capacity up to 25 um and working pressure 16 bar. Operating temperature up to 150°C. Made of stainless steel strainer.
HFPI pre-filter with G1 1/2" connection thread for use in areas with high corrosive environments. Filtration capacity up to 20 um. Maximum working pressure up to 50 bar,...
The CFB filter cartridge is used to remove the largest mechanical impurities from the compressed air. Sintered bronze insert with filtration capacity up to 15 μm. Working...
The CFB filter cartridge is used to remove the largest mechanical impurities from the compressed air. Sintered bronze insert with filtration capacity up to 15 μm. Working...
