Accessories for manometers
-
Pressure indicators; SI signal devices
-
Manometer covers; rubber blue
-
Condensing loops; twisted and curved versions
-
Taps and valves for pressure gauges; shut-off and test versions
-
Accessories; connection
-
Rings; sealing
Bestsellers
Sealing ring made of aluminium for thread M12 × 1.5; G 1/4".
The working pressure is 25 bar. Connection is G 1/2". The body of the tap is made of brass.
The diameter of the cover is 63 mm. It is suitable for applications with higher demands on instrument life.
The working pressure is 630 bar. Connection is M20 × 1.5. The valve body is made of steel.
The reducer is equipped with an internal thread M12 × 1.5 and an external thread M20 × 1.5.
The reducer is equipped with an internal thread M12 × 1.5 and an external thread G 1/4".
The reducer is equipped with G 1/4" female thread and M20 × 1.5 male thread.
The reducer is equipped with G 1/4" female thread and M12 × 1.5 male thread.
The reducer is equipped with internal thread G 1/2" and external thread M20 × 1.5.
The reducer is equipped with an internal thread M20 × 1.5 and an external thread G 1/2".
The diameter of the cover is 100 mm. It is suitable for applications with higher demands on instrument life.
The diameter of the cover is 40 mm. It is suitable for applications with higher demands on instrument life.
The connection is equipped with two internal threads M20 × 1.5 and M20 × 1.5 left-hand.
The working pressure is 25 bar. Connection is M20 × 1.5. The body of the tap is made of brass.
The working pressure is 25 bar. Connection is G 1/2". The body of the tap is made of brass.
The condensing loop has M20×1.5 outer and M20×1.5 output nuts. The body of the loop is made of steel.
The diameter of the cover is 50 mm. It is suitable for applications with higher demands on instrument life.
Sealing ring made of aluminium for thread M20 × 1.5; G 1/2".
The working pressure is 25 bar. Connection is M20 × 1.5. The body of the tap is made of brass.
The nipple has a pin for an M12 × 1.5 nut on one side and a sleeve on the other. The nipple material is steel.
The nipple has a pin for an M20 × 1.5 nut on one side and a sleeve on the other. The nipple material is steel.
The connection is equipped with two internal threads G 1/4" and G 1/4" left.
The working pressure is 25 bar. Connection is G 1/2". The tap body is made of stainless steel 1.4571.
The attachment has an M12 × 1.5 thread on the outside, left-hand side, and a thread on the other side. The material of the attachment is steel.
The attachment has an M20 × 1.5 thread on the outside, left-hand side, and a thread on the other side. The material of the attachment is steel.
The attachment has an M12 × 1.5 thread on the outside, left-hand side, and a thread on the other side. The material of the extension is stainless steel 1.4571.
The condensing loop has a follower and an output M20 × 1.5 nut. The body of the loop is made of steel.
The attachment has an M20 × 1.5 thread on the outside, left-hand side, and a thread on the other side. The material of the extension is stainless steel 1.4571.
Nut in stainless steel 1.4571 with thread M20 × 1.5.
The working pressure is 25 bar. Connection is G 1/2". The tap body is made of stainless steel 1.4571.
Nut in stainless steel 1.4571 with thread G 1/2".
The working pressure is 250 bar. Connection is G 1/2". The valve body is made of brass.
The working pressure is 250 bar. Connection is M20 × 1.5. The valve body is made of brass.
The working pressure is 400 bar. Connection is G 1/2". The valve body is made of stainless steel 1.4571.
The working pressure is 400 bar. Connection is M20 × 1.5. The valve body is made of steel.
The working pressure is 630 bar. Connection is M20 × 1.5. The valve body is made of stainless steel 1.4571.
The nipple has a pin for an M20 × 1.5 nut on one side and a sleeve on the other. The material of the nipple is stainless steel 1.4571.
