#header { padding-top: 0; position: relative !important; top: 0; } .header-navigation { position: relative !important; } .overall-wrapper { margin: 0 !important; } body:not(.ready) { visibility: visible !important; }

You need to change a setting in your web browser

Please see: How to enable JavaScript in your browser.

If you use ad-blocking software, it may require you to allow JavaScript from this page.

Thank you.

SICOAIR compressed air piping

A new and extremely efficient air distribution system with a smooth pipe wall surface to ensure an extra low pressure gradient - this is the SicoAIR system. The solution is as practical as possible, with a base in lightweight aluminium tubes with outer diameters from 20 to 63 mm and fittings made of black or blue nylon. SicoAIR is the perfect solution for compressed air distribution in the craft and industrial sector - from small ducts to large-scale systems.

#ShowMore#

SICOAIR Compressed Air Piping System

SICOAIR is a modern piping system consisting of aluminium pipes and couplings with a tightening nut, available in sizes from DN 20 to DN 63. The SICOAIR system is primarily designed for craft shops, car and tire repair shops, maintenance shops and smaller manufacturing companies.

Potrubni-rozvody-vzduchu-kompresor-SICOAIR

Pipe sizing - SR system - direct routing
Length	Flow rate (l/min)
Length	100	200	300	500	750	1 000	1 500	2 000	3 000	4 000	6 000	8 000	10 000
10 meters	20	20	20	20	25	25	32	32	40	40	40	50	50
25 m	20	20	20	25	32	32	32	40	40	40	50	63	63
50 m	20	20	25	25	32	40	40	40	40	50	50	63	63
75 m	20	20	25	25	32	40	40	50	50	50	63	63	-
100 m	20	20	25	32	32	40	40	50	50	50	63	63	-
150 m	20	25	25	32	40	50	50	50	50	63	63	63	-
200 m	20	25	25	32	40	50	50	50	50	63	63	63	-
250 m	20	25	32	40	40	50	50	50	50	63	63	63	-
300 m	20	25	32	40	40	50	50	50	50	63	63	63	-
400 m	25	32	40	40	40	50	50	50	63	63	63	63	-
500 m	25	32	40	40	50	50	50	50	63	63	63	-	-

Pipe sizing - SR system - circuit lines
Length	Flow rate (l/min)
Length	100	200	300	500	750	1 000	1 500	2 000	3 000	4 000	6 000	8 000	10 000
25 m	20	20	20	20	20	20	25	25	32	32	40	40	40
50 m	20	20	20	20	20	20	25	25	32	40	40	40	40
75 m	20	20	20	20	25	25	25	32	32	40	40	40	40
100 m	20	20	20	20	25	25	25	32	40	40	40	40	40
150 m	20	20	20	25	25	25	32	32	40	40	40	40	50
200 m	20	20	20	25	25	25	32	40	40	40	40	40	50
250 m	20	20	20	25	32	32	32	40	40	40	40	50	50
300 m	20	20	20	32	32	32	40	40	40	40	50	50	63
400 m	20	20	25	32	32	32	40	40	40	40	50	50	63
500 m	20	20	25	32	32	40	40	40	40	40	50	63	63

SICOAIR meets all customer requirements for modern piping:
quick and easy installation without special tools and welding low pressure drop no corrosion and high air quality excellent aesthetic appearance resistance to UV radiation long service life without leaks possibility of modification and extension of the existing distribution system

Demonstration of pipe preparation and joint formation

Ukázka přípravy trubek a vytváření spojů pomocí systému pro rozvody stlačeného vzduchu SicoAir

	The aluminium pipes of the SICOAIR system have a very high flow rate, minimal pressure gradient compared to traditional steel pipes, low weight, do not corrode and provide the user with low costs not only for installation but also for operation pipe system without losses.

Bestsellers

25 mm pipe clamp

25 mm pipe clamp

Code: SRCP-25

Was: 65 Kč (–1 %)

64 Kč

(53 Kč excl. VAT)

Aluminum tube in 6 m rod 25 / 22.2 - 12.5 bar

1 025 Kč –3 %

Aluminum tube in 6 m rod 25 / 22.2 - 12.5 bar

(223 pcs)

Code: ALB-T6-25

Was: 1 025 Kč (–3 %)

994 Kč

(821 Kč excl. VAT)

Pipe clamp 20 mm

Pipe clamp 20 mm

(63 pcs)

Code: SRCP-20

Was: 65 Kč (–1 %)

64 Kč

(53 Kč excl. VAT)

T-connector 25 mm

T-connector 25 mm

Code: SR24-25

Was: 369 Kč (–2 %)

358 Kč

(296 Kč excl. VAT)

Pipe clamp 40 mm

Pipe clamp 40 mm

(10 pcs)

Code: SRCP-40

Was: 90 Kč (–3 %)

87 Kč

(72 Kč excl. VAT)

90° coupling 25 mm

90° coupling 25 mm

(3 pcs)

Code: SR12-25

Was: 245 Kč (–3 %)

237 Kč

(196 Kč excl. VAT)

Reduced T-coupling 25/20 mm

Reduced T-coupling 25/20 mm

Code: SR25-2025

Was: 498 Kč (–3 %)

483 Kč

(399 Kč excl. VAT)

90° coupling 20 mm

90° coupling 20 mm

(30 pcs)

Code: SR12-20

Was: 210 Kč (–2 %)

204 Kč

(169 Kč excl. VAT)

Direct coupling with external thread G1/2" 20 mm

Direct coupling with external thread G1/2" 20 mm

(20 pcs)

Code: SR3-1220

Was: 120 Kč (–2 %)

117 Kč

(97 Kč excl. VAT)

Straight coupling 25 mm

Straight coupling 25 mm

Code: SR1-25

Was: 235 Kč (–2 %)

228 Kč

(188 Kč excl. VAT)

Show more products

32 items total

45° coupling 20 mm

45° coupling 20 mm

(10 pcs)

169 Kč excl. VAT

204 Kč / pcs

Elbow 45° socket coupling with a diameter of 20 mm. Easy and fast installation, low pressure gradient, resistant to mechanical damage, UV radiation and corrosion. Operating...

Code: SR21-20

T-connector 20 mm

T-connector 20 mm

(10 pcs)

213 Kč excl. VAT

258 Kč / pcs

T-coupling with a diameter of 20 mm. Easy and fast installation, low pressure gradient, resistant to mechanical damage, UV radiation and corrosion. Operating temperature -20...

Code: SR24-20

Aluminum tube in 6 m rod 20 / 17.4 - 12.5 bar

Aluminum tube in 6 m rod 20 / 17.4 - 12.5 bar

(27 pcs)

598 Kč excl. VAT

724 Kč / pcs

Powder-coated blue aluminium pipe with 20 / 17.4 mm dimension for piping of compressed air and inert gases up to 12.5 bar. Pipe material - AW-6060 T6 alloy.

Code: ALB-T6-20

90° coupling 20 mm

90° coupling 20 mm

(30 pcs)

169 Kč excl. VAT

204 Kč / pcs

Elbow 90° coupling with a diameter of 20 mm. Easy and fast installation, low pressure gradient, resistant to mechanical damage, UV radiation and corrosion. Operating temperature...

Code: SR12-20

Reduced T-coupling 32/20 mm

Reduced T-coupling 32/20 mm

(17 pcs)

561 Kč excl. VAT

679 Kč / pcs

Reduced T-coupling with 32 mm diameter and 20 mm tap. Easy and fast installation, low pressure gradient, resistant to mechanical damage, UV radiation and corrosion. Operating...

Code: SR25-2032

Direct coupling with internal thread G1/2" 20 mm

Direct coupling with internal thread G1/2" 20 mm

(10 pcs)

121 Kč excl. VAT

147 Kč / pcs

Straight coupling with internal thread G1/2", diameter 20 mm. Easy and fast installation, low pressure gradient, resistant to mechanical damage, UV radiation and corrosion....

Code: SR2-1220

Reduced direct coupling 20x25 mm

Reduced direct coupling 20x25 mm

(5 pcs)

179 Kč excl. VAT

216 Kč / pcs

Reduced straight coupling with a diameter of 20 x 25 mm. Easy and fast installation, low pressure gradient, resistant to mechanical damage, UV radiation and corrosion. Operating...

Code: SR1R-2025

Direct coupling with external thread G1/2" 20 mm

Direct coupling with external thread G1/2" 20 mm

(20 pcs)

97 Kč excl. VAT

117 Kč / pcs

Straight coupling with external thread G1/2", diameter 20 mm. Easy and fast installation, low pressure gradient, resistant to mechanical damage, UV radiation and corrosion....

Code: SR3-1220

Straight coupling 20 mm

Straight coupling 20 mm

(15 pcs)

169 Kč excl. VAT

204 Kč / pcs

Nylon straight coupling with a diameter of 20 mm. Easy and fast installation, low pressure gradient, resistant to mechanical damage, UV radiation and corrosion. Operating...

Code: SR1-20

Pipe clamp 20 mm

Pipe clamp 20 mm

(63 pcs)

53 Kč excl. VAT

64 Kč / pcs

Plastic pipe clamp 20 mm. Easy and fast installation, low pressure gradient, resistant to mechanical damage, UV radiation and corrosion. Operating temperature -20 °C to 70 °C,...

Code: SRCP-20

Aluminum tube in 6 m rod 20 / 17.4 - 12.5 bar - green

Aluminum tube in 6 m rod 20 / 17.4 - 12.5 bar - green

(64 pcs)

748 Kč excl. VAT

905 Kč / pcs

Powder-coated aluminium pipe in green colour with a dimension of 20/17.4 mm and a length of 6 m designed for piping of compressed air and inert gases up to 12.5 bar. Pipe...

Code: ALG-T6-20

Direct coupling with external thread G3/4" 20 mm

Direct coupling with external thread G3/4" 20 mm

(18 pcs)

113 Kč excl. VAT

137 Kč / pcs

Straight coupling with external thread G3/4", diameter 20 mm. Easy and fast installation, low pressure gradient, resistant to mechanical damage, UV radiation and corrosion....

Code: SR3-3420

Reduced T-coupling 40/20 mm

Reduced T-coupling 40/20 mm

(10 pcs)

788 Kč excl. VAT

954 Kč / pcs

Reduced T-coupling with 40 mm diameter and 20 mm tap. Easy and fast installation, low pressure gradient, resistant to mechanical damage, UV radiation and corrosion. Operating...

Code: SR25-2040

Reduced T-coupling 50/20 mm

1 342 Kč –3 %

Reduced T-coupling 50/20 mm

(18 pcs)

1 075 Kč excl. VAT

1 301 Kč / pcs

Reduced T-coupling with 50 mm diameter and 20 mm tap. Easy and fast installation, low pressure gradient, resistant to mechanical damage, UV radiation and corrosion. Operating...

Code: SR25-2050

Pipe deburrer 15 - 50 mm

1 948 Kč –3 %

Pipe deburrer 15 - 50 mm

(1 pcs)

1 561 Kč excl. VAT

1 889 Kč / pcs

Pipe deburrer for pipe diameter 15 - 50 mm. Operating temperature -20 °C to 70 °C. Working pressure -0.6 to 12 bar.

Code: SRPD-50

Reduced T-coupling 25/20 mm

Reduced T-coupling 25/20 mm

399 Kč excl. VAT

483 Kč / pcs

Reduced T-coupling with 25 mm diameter and 20 mm tap. Easy and fast installation, low pressure gradient, resistant to mechanical damage, UV radiation and corrosion. Operating...

Code: SR25-2025

Bent tube 20 mm

Bent tube 20 mm

247 Kč excl. VAT

299 Kč / pcs

Curved pipe with a diameter of 20 mm. Easy and fast installation, low pressure gradient, resistant to mechanical damage, UV radiation and corrosion. Operating temperature -20...

Code: ALZB-2-20

Bent tube 20 mm

Bent tube 20 mm

305 Kč excl. VAT

369 Kč / pcs

Curved pipe with a diameter of 20 mm. Easy and fast installation, low pressure gradient, resistant to mechanical damage, UV radiation and corrosion. Operating temperature -20...

Code: ALZB-1-20

Deburring scraper SR230-07

Deburring scraper SR230-07

563 Kč excl. VAT

681 Kč / pcs

Manual deburring scraper for air ductwork. Easy and fast installation, low pressure gradient, resistant to mechanical damage, UV radiation and corrosion. Operating temperature...

Code: SRHD

Plug 20 mm

111 Kč excl. VAT

134 Kč / pcs

Plug 20 mm. Easy and fast installation, low pressure gradient, resistant to mechanical damage, UV radiation and corrosion. Operating temperature -20 °C to 70 °C, operating...

Code: SR61-20

Hook wrenches for coupling nuts 20 mm

Hook wrenches for coupling nuts 20 mm

326 Kč excl. VAT

394 Kč / pcs

Hook wrenches for SICOAIR coupling nuts for 20 mm diameter. Easy and fast installation, low pressure gradient, resistant to mechanical damage, UV radiation and corrosion....

Code: SRCS-20

Direct coupling with external thread G1/2" 20 mm aluminum

Direct coupling with external thread G1/2" 20 mm aluminum

720 Kč excl. VAT

871 Kč / pcs

Straight coupling with external thread G1/2", diameter 20 mm. Easy and fast installation, low pressure gradient, resistant to mechanical damage, UV radiation and corrosion....

Code: SR3A-1220

Hook wrenches for 20 mm coupling bodies

Hook wrenches for 20 mm coupling bodies

326 Kč excl. VAT

394 Kč / pcs

Hook wrenches for SICOAIR coupling bodies for 20 mm diameter. Easy and fast installation, low pressure gradient, resistant to mechanical damage, UV radiation and corrosion....

Code: SRBS-20

Aluminum tube in 3 m rod 20 / 17.4 - 12.5 bar

Aluminum tube in 3 m rod 20 / 17.4 - 12.5 bar

299 Kč excl. VAT

362 Kč / pcs

Powder-coated blue aluminium pipe with 20 / 17.4 mm dimension for piping of compressed air and inert gases up to 12.5 bar. Pipe material - AW-6060 T6 alloy.

Code: ALB-T3-20

Branch with internal thread G1/2" 20 mm

Branch with internal thread G1/2" 20 mm

262 Kč excl. VAT

317 Kč / pcs

Tap with female thread G1/2", coupling 20 mm. Easy and fast installation, low pressure gradient, resistant to mechanical damage, UV radiation and corrosion. Operating...

Code: SR41-1220

Slip nut 20 mm

50 Kč excl. VAT

60 Kč / pcs

Replacement 20 mm pipe nut for compressed air system from SicoAir compressor. Easy and fast installation, low pressure gradient, resistant to mechanical damage, UV radiation and...

Code: SRNT-20

Ball valve with couplings G3/4" 20 mm

Ball valve with couplings G3/4" 20 mm

535 Kč excl. VAT

647 Kč / pcs

Ball valve with 20 mm couplings and G3/4" thread. Easy and fast installation, low pressure gradient, resistant to mechanical damage, UV radiation and corrosion. Operating...

Code: SR76-20

Cutting ring 20 mm

Cutting ring 20 mm

21 Kč excl. VAT

25 Kč / pcs

Cutting ring 20 mm. Easy and fast installation, low pressure gradient, resistant to mechanical damage, UV radiation and corrosion. Operating temperature -20 °C to 70 °C,...

Code: SRGR-20

Direct coupling with internal thread G1/2" 20 mm aluminum

Direct coupling with internal thread G1/2" 20 mm aluminum

720 Kč excl. VAT

871 Kč / pcs

Straight coupling with internal thread G1/2", diameter 20 mm. Easy and fast installation, low pressure gradient, resistant to mechanical damage, UV radiation and corrosion....

Code: SR2A-1220

Pipe cutter 15 - 40 mm

5 641 Kč –3 %

Pipe cutter 15 - 40 mm

4 522 Kč excl. VAT

5 472 Kč / pcs

Pipe cutter SICOAIR for diameter 15 - 40 mm. Easy and fast installation, low pressure gradient, resistant to mechanical damage, UV radiation and corrosion. Operating temperature...

Code: SRPC-40

Pipe cutter 15 - 63 mm

10 410 Kč –3 %

Pipe cutter 15 - 63 mm

8 345 Kč excl. VAT

10 098 Kč / pcs

Pipe cutter SICOAIR for diameter 15 - 63 mm. Easy and fast installation, low pressure gradient, resistant to mechanical damage, UV radiation and corrosion. Operating temperature...

Code: SRPC-63

Reduced T-coupling 63/20 mm

1 906 Kč –3 %

Reduced T-coupling 63/20 mm

1 527 Kč excl. VAT

1 848 Kč / pcs

Reduced T-coupling with 63 mm diameter and 20 mm tap. Easy and fast installation, low pressure gradient, resistant to mechanical damage, UV radiation and corrosion. Operating...

Code: SR25-2063