Other pneumatic tools
The M7 brand offers many other specialized air-powered tools. The specific design of the individual products makes the tools market leaders in the field of pneumatisation - for example, the window glass frame cutter with low noise level and air extraction from the work area. In addition, the brake pad press replaces complicated manual work and increases the speed of the change itself. Can be used for both right and left-handed users. But we have much more on offer - just take a look at this page below.
Bestsellers
Miniature oilers for direct mounting on the inlet threads of 1/4" air tools; positioning directly on the tool improves oil dispersion in the compressed air; oil quantity...
Mineral oil for lubrication of pneumatic tools. Special viscosity specifically for compressed air driven tools. Branded oil manufacturer with safety data sheet available....
Miniature oilers for direct mounting on the inlet threads of 3/8" pneumatic tools; positioning directly on the tool improves oil dispersion in compressed air; oil quantity...
Filter for mounting on spray guns and pneumatic tools with a maximum pressure of up to 16 bar and a filtration capacity of 20 µm and 1/4" thread.
Professional tire inflator SB-3130 for tire inflation in tire shops, car repair shops, transport companies. The digital display shows three different pressure units, PSI, bar...
Replacement window glass cutting attachments for M7 - QK-111 pneumatic tools. 5 types with different shapes - Type P54 in the picture.
Airbrush in practical set with vinyl hose, containers, tightening wrench, dropper and feeding adapter. Adjustable coating width from 6 to 40 mm. Air inlet 1/4" with special...
Tools for simple cutting of window glass from frames, professional use. The rear air outlet reduces noise and diverts airflow away from the work surface. Low vibration and low...
Small regulator for mounting on spray guns with max. pressure 11 bar, 1/4" thread and 40 mm pressure gauge.
Replacement rubber disc. Original replacement disc for the QB-802 sticker remover from M7, a well-known manufacturer of air tools.
Replacement window glass cutting attachments for M7 - QK-111 pneumatic tools. 5 types with different shapes - Type P51 pictured.
Replacement window glass cutting attachments for M7 - QK-111 pneumatic tools. 5 types with different shapes - Type P53 in the picture.
Replacement window glass cutting attachments for M7 - QK-111 pneumatic tools. 5 types with different shapes - Type P52 in the picture.
Replaces complicated manual work and significantly increases speed when changing brake pads; can be used with both right and left hand. Suitable for all types and makes of...
Airbrush miniature spray gun for fine spraying and artistic drawings; adjustable container in different directions for good handling. Practical packaging in a small case with...
Replacement wire wheel. Original replacement disc for the QB-802 sticker remover from M7, a well-known manufacturer of air tools.
Kit for draining and refilling brake fluids. Designed primarily for car repair shops and the auto repair industry.
Device for verifying the torque magnitude of impact wrenches. Electronic design with display of the achieved torque. Designed primarily for service centers and tire shops with a...
Replacement window glass cutting attachments for M7 - QK-111 pneumatic tools. 5 types with different shapes - Type P50 in the picture.
original lubricant in tube with application attachment; intended for lubrication of internal parts of M7 pneumatic tools.
Miniature oilers for direct mounting on 1/4" air tool inlet threads . Placement directly on the tool improves oil dispersion in the compressed air. Possibility of adjusting the...
Robust tyre inflator designed for inflating passenger car tyres in a professional design, e.g. for tyre workshops. Manometer with 63 mm diameter and rubber protection, hose...
Robust tyre inflator designed for inflating truck tyres in a professional design, e.g. for tyre workshops, workshops of transport companies and forwarding companies. Manometer...
Flash drive to USB in size ? MB as an illustration of the impact tightener from the popular air tool manufacturer M7. Rubberized design. Reward in the bonus program.
Cap from air tool manufacturer M7 in universal size with back clip. Textile design. Reward in the bonus program.
The digital meter is used for precise torque setting of industrial screwdrivers. Measuring range 0 - 10 Nm, supplied in a handy carrying case to protect the device from...
Special machine for removing vinyl stickers, rust and oxides on car bodies. It allows the removal of the paintwork without any damage to the paintwork without heating the...
Device for verifying the torque magnitude of impact wrenches in the front-running version. After setting the desired torque, the instrument verifies whether or not the tool...
Device for verifying the torque magnitude of impact wrenches in the reversing version. After setting the desired torque, the instrument verifies whether or not the tool under...
The M7 air tool bag from the same manufacturer of these tools will give your service technicians an easy way to carry their air tools, which they will always have on hand thanks...
LED lighting in the form of a stick for illuminating hard-to-reach areas in the workplace from the popular manufacturer of pneumatic tools M7. Rubberised plastic design for...
