Measurement of pressure and temperature of the medium

In the measuring technology category you will find pressure gauges for measuring the pressure of compressed media in various designs. We offer from simple plastic gauges with an accuracy of 2.5%, to robust stainless steel gauges with an excellent accuracy of 0.6% deviation. You can measure the temperature of the medium using industrial thermometers, which are also included in the offer. Pressure transducers with various switching, switching on, switching off or switching on functions are used for sensing the pressure and subsequent conversion to an analogue electrical signal. If you have special requirements for measuring complex media and high temperatures, send us an enquiry and if you simply want to find out more about the range and how to choose a manometer, thermometer and sensor, click on continue.

#ShowMore#

Choosing the right type of manometer

When selecting a manometer, we recommend that you consider the following aspects - connection, scale range, mechanical resistance and display accuracy. If you really need the most accurate pressure gauge, choose the one in glycerine. We offer instruments with standard accuracy classes of 0.6%, 1.0%, 1.6%, 2.5%, and on request we can also supply even higher accuracy types with panel mounting - these are not variants standing on a fixed thread in a free space. For more detailed information on choosing the right pressure gauge, see this article from our advice section: how to choose a pressure gauge

WIKA thermometers

Are you choosing a technical thermometer for industry and other areas? For aggressive media, we recommend thermometers in stainless steel with a maximum medium pressure per sump (recommended for increased lifetime of type A) of less than 25 bar, for non-aggressive media you can use the aluminium version of the thermometer, where the recommended maximum medium pressure per sump is 6 atmospheres.

Pressure sensors and switches

Pressure transducers and switches are used to convert pressure into an analogue signal - you can use them especially in automation technology when you are about to connect other devices. Pressure switches se see to it that he has compressed air the pressure you need in the airlock. Switch monitors the pressure in the airbox and when the pressure drops below the set lower limit, the switch will turn on and engage the electrical circuit. This starts the electric motor that drives the compressor. A comprehensive article on pressure switches can be found here: How to pressure switches

Bestsellers

Manometer side 0/10 bar - 40 - 1/8"
186 Kč –4 %
Manometer side 0/10 bar - 40 - 1/8"
Stock (310 pcs)
Code: MS01-14
Was: 186 Kč  (–4 %)
177 Kč
(146 Kč excl. VAT)
Sealing ring TP-M12
8 Kč –12 %
Sealing ring TP-M12
up to 14 days
Code: TP-M12
Was: 8 Kč  (–12 %)
7 Kč
(6 Kč excl. VAT)
Pressure gauge glycerin side 0/250 bar - G1/4"
430 Kč –5 %
Was: 430 Kč  (–5 %)
408 Kč
(337 Kč excl. VAT)
Manometer cover GOMB-63
Manometer cover GOMB-63
Stock (13 pcs)
Code: GOMB-63
 
64 Kč
(53 Kč excl. VAT)
Manometer rear 0/16 bar - 40 - 1/8"
186 Kč –4 %
Manometer rear 0/16 bar - 40 - 1/8"
Stock (389 pcs)
Code: MZ01-15
Was: 186 Kč  (–4 %)
177 Kč
(146 Kč excl. VAT)
Pressure gauge glycerin side 0/2.5 bar - G1/2"
999 Kč –5 %
Was: 999 Kč  (–5 %)
949 Kč
(784 Kč excl. VAT)
Manometer rear 0/10 bar - 40 - 1/8"
186 Kč –4 %
Manometer rear 0/10 bar - 40 - 1/8"
Stock (495 pcs)
Code: MZ01-14
Was: 186 Kč  (–4 %)
177 Kč
(146 Kč excl. VAT)
Pressure gauge glycerin side 0/25 bar - M20x1.5
999 Kč –5 %
Was: 999 Kč  (–5 %)
949 Kč
(784 Kč excl. VAT)
Pressure gauge glycerin side 0/16 bar - G1/2"
999 Kč –5 %
Was: 999 Kč  (–5 %)
949 Kč
(784 Kč excl. VAT)
kryt wika snimac senzor tlaku vzduch prevodnik
Protective cap - Overpressure
Stock (2 pcs)
Code: DRSB
 
105 Kč
(87 Kč excl. VAT)
328 items total
Pressure gauge glycerin side 0/100 bar - G1/4"
Tip
430 Kč –5 %
337 Kč excl. VAT
408 Kč / pcs

glycerine manometer with a range of 0/100 bar. Pointer diameter 63 mm with 1/4" side connection. Glycerine filling makes it easier to read the measured pressure for pressure...

Code: GS04-19
Manometer rear 0/16 bar - 63 mm - 1/4"
223 Kč –4 %
175 Kč excl. VAT
212 Kč / pcs

Plastic manometer with 63 mm diameter gauge with rear connection via G1/4" thread for pressure measurement from 0 to 16 bar. Designed for pressure measurements of non-aggressive...

Code: MZ04-15
Pressure gauge glycerin side 0/400 bar - G1/4"
Tip
430 Kč –5 %
337 Kč excl. VAT
408 Kč / pcs

glycerine manometer with 0/400 bar range. Pointer diameter 63 mm with 1/4" side connection. Glycerine filling makes it easier to read the measured pressure for pressure surges....

Code: GS04-22
Manometer side 0/4 bar - 63 mm - 1/4"
203 Kč –4 %
160 Kč excl. VAT
193 Kč / pcs

Plastic manometer with 63 mm diameter gauge with side connection via G1/4" thread for pressure measurement with a range of 0 to 4 bar. Designed for pressure measurements of...

Code: MS04-12
Pressure gauge rear -1/0.6 bar - 63 mm - 1/4"
223 Kč –4 %
175 Kč excl. VAT
212 Kč / pcs

Plastic manometer with 63 mm diameter gauge with rear connection via G1/4" thread for measuring vacuum and pressure with a range of -1 to 0.6 bar. Designed for pressure...

Code: MZ04-02
Pressure gauge glycerin rear 0/16 bar - G1/4"
Tip
430 Kč –5 %
337 Kč excl. VAT
408 Kč / pcs

glycerine manometer with 0/16 bar range. Pointer diameter 63 mm with 1/4" rear connection. Glycerine filling makes it easier to read the measured pressure for pressure surges....

Code: GZ04-15
Manometer side 0/1.6 bar - 63 mm - 1/4"
203 Kč –4 %
160 Kč excl. VAT
193 Kč / pcs

Plastic manometer with 63 mm diameter gauge with side connection via G1/4" thread for pressure measurement from 0 to 1.6 bar. Designed for pressure measurements of...

Code: MS04-10
Pressure gauge rear -1/0 bar - 63 mm - 1/4"
223 Kč –4 %
175 Kč excl. VAT
212 Kč / pcs

Plastic manometer with 63 mm diameter gauge with rear connection via G1/4" thread for measuring vacuum with a range of -1 to 0 bar. Designed for pressure measurements of...

Code: MZ04-01
Manometer side 0/2.5 bar - 63 mm - 1/4"
203 Kč –4 %
160 Kč excl. VAT
193 Kč / pcs

Plastic manometer with 63 mm diameter gauge with side connection via G1/4" thread for pressure measurement with a range of 0 to 2.5 bar. Designed for pressure measurements of...

Code: MS04-11
drss wika snimac senzor tlaku vzduch prevodnik
Tip
596 Kč excl. VAT
721 Kč / pcs

Pressure switch with switching function for pressure range -1 to -10 bar with flat connector. Designed for non-aggressive fluids : hydraulic oil, air, water, oil emulsions....

Code: DRSS-10
Manometer side 0/2.5 bar - 50 mm - 1/4"
186 Kč –4 %
146 Kč excl. VAT
177 Kč / pcs

Plastic manometer with 50 mm diameter gauge with side connection via G1/4" thread for pressure measurement with a range of 0 to 2.5 bar. Designed for pressure measurements of...

Code: MS03-11
Manometer side 0/16 bar - 50 mm - 1/4"
186 Kč –4 %
146 Kč excl. VAT
177 Kč / pcs

Plastic manometer with 50 mm diameter gauge with side connection via G1/4" thread for pressure measurement from 0 to 16 bar. Designed for pressure measurements of non-aggressive...

Code: MS03-15
Manometer reduction RM-G14M12
326 Kč –1 %
264 Kč excl. VAT
320 Kč / pcs

The reducer is equipped with G 1/4" female thread and M12 × 1.5 male thread.

Code: RM-G14M12
Manometer side 0/10 bar - 50 mm - 1/4"
186 Kč –4 %
146 Kč excl. VAT
177 Kč / pcs

Plastic manometer with 50 mm diameter gauge with side connection via G1/4" thread for pressure measurement with a range of 0 to 10 bar. Designed for pressure measurements of...

Code: MS03-14
Pressure gauge with face flange 0/160 bar - 63 mm - 1/4"
555 Kč excl. VAT
672 Kč / pcs

Panel gauge with front flange, 63 mm indicator with pressure measurement range 0/160 bar with 2.5% deviation. Side connection 1/4". Body made of steel, measuring member and...

Code: MSE63-160
Manometer rear 0/1.6 bar - 50 mm - 1/4"
203 Kč –4 %
160 Kč excl. VAT
193 Kč / pcs

Plastic manometer with 50 mm diameter gauge with rear connection via G1/4" thread for pressure measurement from 0 to 1.6 bar. Designed for pressure measurements of...

Code: MZ03-10
Manometer rear 0/16 bar - 50 mm - 1/4"
203 Kč –4 %
160 Kč excl. VAT
193 Kč / pcs

Plastic manometer with 50 mm diameter gauge with rear connection via G1/4" thread for pressure measurement from 0 to 16 bar. Designed for pressure measurements of non-aggressive...

Code: MZ03-15
Manometer side 0/40 bar - 63 mm - 1/4"
203 Kč –4 %
160 Kč excl. VAT
193 Kč / pcs

Plastic manometer with 63 mm diameter gauge with side connection via G1/4" thread for pressure measurement from 0 to 40 bar. Designed for pressure measurements of non-aggressive...

Code: MS04-17
Manometer side 0/16 bar - 63 mm - 1/4"
203 Kč –4 %
160 Kč excl. VAT
193 Kč / pcs

Plastic manometer with 63 mm diameter gauge with side connection via G1/4" thread for pressure measurement from 0 to 16 bar. Designed for pressure measurements of non-aggressive...

Code: MS04-15
Manometer side 0/1 bar - 50 mm - 1/4"
186 Kč –4 %
146 Kč excl. VAT
177 Kč / pcs

Plastic manometer with 50 mm diameter gauge with side connection via G1/4" thread for pressure measurement with a range of 0 to 1 bar. Designed for pressure measurements of...

Code: MS03-09
Pressure gauge glycerin side 0/10 bar - G1/4"
Tip
430 Kč –5 %
337 Kč excl. VAT
408 Kč / pcs

glycerine manometer with a range of 0/10 bar. Pointer diameter 63 mm with 1/4" side connection. Glycerine filling makes it easier to read the measured pressure for pressure...

Code: GS04-14
Manometer side 0/4 bar - 50 mm - 1/4"
186 Kč –4 %
146 Kč excl. VAT
177 Kč / pcs

Plastic manometer with 50 mm diameter gauge with side connection via G1/4" thread for pressure measurement with a range of 0 to 4 bar. Designed for pressure measurements of...

Code: MS03-12
Manometer side -1/0 bar - 63 mm - 1/4"
203 Kč –4 %
160 Kč excl. VAT
193 Kč / pcs

Plastic manometer with 63 mm diameter gauge with side connection via G1/4" thread for pressure measurements from -1 to 0 bar. Designed for pressure measurements of...

Code: MS04-01
Manometer rear 0/10 bar - 63 mm - 1/4"
223 Kč –4 %
175 Kč excl. VAT
212 Kč / pcs

Plastic manometer with 63 mm diameter gauge with rear connection via G1/4" thread for pressure measurement from 0 to 10 bar. Designed for pressure measurements of non-aggressive...

Code: MZ04-14
Manometer rear 0/2.5 bar - 50 mm - 1/4"
203 Kč –4 %
160 Kč excl. VAT
193 Kč / pcs

Plastic manometer with 50 mm diameter gauge with rear connection via G1/4" thread for pressure measurement from 0 to 2.5 bar. Designed for pressure measurements of...

Code: MZ03-11
Side manometer 0/100 bar - 50 mm - 1/4"
186 Kč –4 %
146 Kč excl. VAT
177 Kč / pcs

Plastic manometer with 50 mm diameter gauge with side connection via G1/4" thread for pressure measurement from 0 to 100 bar. Designed for pressure measurements of...

Code: MS03-19
Manometer side -1/5 bar - 63 mm - 1/4"
203 Kč –4 %
160 Kč excl. VAT
193 Kč / pcs

Plastic manometer with 63 mm diameter gauge with side connection via G1/4" thread for pressure and vacuum measurement with a range of -1 to 5 bar. Designed for pressure...

Code: MS04-05
Side manometer 0/100 bar - 63 mm - 1/4"
203 Kč –4 %
160 Kč excl. VAT
193 Kč / pcs

Plastic manometer with 63 mm diameter gauge with side connection via G1/4" thread for pressure measurement from 0 to 100 bar. Designed for pressure measurements of...

Code: MS04-19
Manometer side -1/0 bar - 50 mm - 1/4"
186 Kč –4 %
146 Kč excl. VAT
177 Kč / pcs

Plastic manometer with 50 mm diameter gauge with side connection via G1/4" thread for measuring vacuum with a range of -1 to 0 bar. Designed for pressure measurements of...

Code: MS03-01
Manometer side 0/25 bar - 50 mm - 1/4"
186 Kč –4 %
146 Kč excl. VAT
177 Kč / pcs

Plastic manometer with 50 mm diameter gauge with side connection via G1/4" thread for pressure measurement with a range of 0 to 25 bar. Designed for pressure measurements of...

Code: MS03-16
Manometer side 0/60 bar - 63 mm - 1/4"
203 Kč –4 %
160 Kč excl. VAT
193 Kč / pcs

Plastic manometer with 63 mm diameter gauge with side connection via G1/4" thread for pressure measurement from 0 to 60 bar. Designed for pressure measurements of non-aggressive...

Code: MS04-18
Manometer side 0/250 bar - 63 mm - 1/4"
203 Kč –4 %
160 Kč excl. VAT
193 Kč / pcs

Plastic manometer with 63 mm diameter gauge with side connection via G1/4" thread for pressure measurement from 0 to 250 bar. Designed for pressure measurements of...

Code: MS04-21
Manometer side 0/10 bar - 63 mm - 1/4"
203 Kč –4 %
160 Kč excl. VAT
193 Kč / pcs

Plastic manometer with 63 mm diameter gauge with side connection via G1/4" thread for pressure measurement from 0 to 10 bar. Designed for pressure measurements of non-aggressive...

Code: MS04-14
Pressure gauge glycerin side 0/250 bar - G1/4"
Tip
430 Kč –5 %
337 Kč excl. VAT
408 Kč / pcs

glycerine manometer with 0/250 bar range. Pointer diameter 63 mm with 1/4" side connection. Glycerine filling makes it easier to read the measured pressure for pressure surges....

Code: GS04-21
Pressure gauge glycerin rear 0/4 bar - G1/4"
Tip
430 Kč –5 %
337 Kč excl. VAT
408 Kč / pcs

glycerine manometer with 0/4 bar range. Pointer diameter 63 mm with 1/4" rear connection. Glycerine filling makes it easier to read the measured pressure for pressure surges....

Code: GZ04-12
drso wika snimac senzor tlaku vzduch prevodnik
Tip
596 Kč excl. VAT
721 Kč / pcs

Pressure switch with release function for pressure range 0,3 to 2 bar with flat connector. Designed for non-aggressive fluids : hydraulic oil, air, water, oil emulsions....

Code: DRSO-2
drso wika snimac senzor tlaku vzduch prevodnik
Tip
596 Kč excl. VAT
721 Kč / pcs

Pressure switch with release function for pressure range -1 to 10 bar with flat connector. Designed for non-aggressive fluids : hydraulic oil, air, water, oil emulsions....

Code: DRSO-10
drss wika snimac senzor tlaku vzduch prevodnik
Tip
596 Kč excl. VAT
721 Kč / pcs

Pressure switch with switching function for pressure range -0.3 to -2 bar with flat connector. Designed for non-aggressive fluids : hydraulic oil, air, water, oil emulsions....

Code: DRSS-2
drss wika snimac senzor tlaku vzduch prevodnik
Tip
710 Kč excl. VAT
859 Kč / pcs

Pressure switch with switching function for pressure range -10 to -70 bar with flat connector. Designed for non-aggressive fluids : hydraulic oil, air, water, oil emulsions....

Code: DRSS-70
drss wika snimac senzor tlaku vzduch prevodnik
Tip
977 Kč excl. VAT
1 182 Kč / pcs

Pressure switch with switching function for pressure range -100 to -350 bar with flat connector. Designed for non-aggressive fluids : hydraulic oil, air, water, oil emulsions....

Code: DRSS-350
Up
More products