Measurement of pressure and temperature of the medium

In the measuring technology category you will find pressure gauges for measuring the pressure of compressed media in various designs. We offer from simple plastic gauges with an accuracy of 2.5%, to robust stainless steel gauges with an excellent accuracy of 0.6% deviation. You can measure the temperature of the medium using industrial thermometers, which are also included in the offer. Pressure transducers with various switching, switching on, switching off or switching on functions are used for sensing the pressure and subsequent conversion to an analogue electrical signal. If you have special requirements for measuring complex media and high temperatures, send us an enquiry and if you simply want to find out more about the range and how to choose a manometer, thermometer and sensor, click on continue.

#ShowMore#

Choosing the right type of manometer

When selecting a manometer, we recommend that you consider the following aspects - connection, scale range, mechanical resistance and display accuracy. If you really need the most accurate pressure gauge, choose the one in glycerine. We offer instruments with standard accuracy classes of 0.6%, 1.0%, 1.6%, 2.5%, and on request we can also supply even higher accuracy types with panel mounting - these are not variants standing on a fixed thread in a free space. For more detailed information on choosing the right pressure gauge, see this article from our advice section: how to choose a pressure gauge

WIKA thermometers

Are you choosing a technical thermometer for industry and other areas? For aggressive media, we recommend thermometers in stainless steel with a maximum medium pressure per sump (recommended for increased lifetime of type A) of less than 25 bar, for non-aggressive media you can use the aluminium version of the thermometer, where the recommended maximum medium pressure per sump is 6 atmospheres.

Pressure sensors and switches

Pressure transducers and switches are used to convert pressure into an analogue signal - you can use them especially in automation technology when you are about to connect other devices. Pressure switches se see to it that he has compressed air the pressure you need in the airlock. Switch monitors the pressure in the airbox and when the pressure drops below the set lower limit, the switch will turn on and engage the electrical circuit. This starts the electric motor that drives the compressor. A comprehensive article on pressure switches can be found here: How to pressure switches

Bestsellers

Side manometer 0/2.5 bar - 63 mm - M12*1.5
203 Kč –4 %
Side manometer 0/2.5 bar - 63 mm - M12*1.5
Stock (67 pcs)
Code: MS05-11
Was: 203 Kč  (–4 %)
193 Kč
(160 Kč excl. VAT)
Manometer rear 0/16 bar - 40 - 1/8"
186 Kč –4 %
Manometer rear 0/16 bar - 40 - 1/8"
Stock (270 pcs)
Code: MZ01-15
Was: 186 Kč  (–4 %)
177 Kč
(146 Kč excl. VAT)
Pressure gauge glycerin rear 0/160 bar - G1/4"
430 Kč –5 %
Was: 430 Kč  (–5 %)
408 Kč
(337 Kč excl. VAT)
Pressure gauge connection socket PTN-G12M20L
Pressure gauge connection socket PTN-G12M20L
up to 14 days
Code: PTN-G12M20L
 
236 Kč
(195 Kč excl. VAT)
Pressure gauge glycerin side 0/25 bar - M20x1.5
999 Kč –5 %
Was: 999 Kč  (–5 %)
949 Kč
(784 Kč excl. VAT)
kryt wika snimac senzor tlaku vzduch prevodnik
Protective cap - Overpressure
Stock (3 pcs)
Code: DRSB
 
105 Kč
(87 Kč excl. VAT)
drss wika snimac senzor tlaku vzduch prevodnik
Pressure switch - switch - 1 / 10 bar
Stock (4 pcs)
Code: DRSS-10
 
721 Kč
(596 Kč excl. VAT)
Manometer rear 0/10 bar - 63 mm - 1/4"
223 Kč –4 %
Manometer rear 0/10 bar - 63 mm - 1/4"
Stock (243 pcs)
Code: MZ04-14
Was: 223 Kč  (–4 %)
212 Kč
(175 Kč excl. VAT)
Manometer side 0/1.6 bar - 50 mm - 1/4"
186 Kč –4 %
Manometer side 0/1.6 bar - 50 mm - 1/4"
Stock (215 pcs)
Code: MS03-10
Was: 186 Kč  (–4 %)
177 Kč
(146 Kč excl. VAT)
drss wika snimac senzor tlaku vzduch prevodnik
Pressure switch - switch - 0.3 / 2 bar
Stock (2 pcs)
Code: DRSS-2
 
721 Kč
(596 Kč excl. VAT)
374 items total
Manometer reduction RM-M20G12
185 Kč excl. VAT
224 Kč / pcs

The reducer is equipped with an internal thread M20 × 1.5 and an external thread G 1/2".

Code: RM-M20G12
Manometer reduction RM-G12M20
218 Kč excl. VAT
264 Kč / pcs

The reducer is equipped with internal thread G 1/2" and external thread M20 × 1.5.

Code: RM-G12M20
Pressure gauge glycerin side 0/16 bar - G1/2"
Tip
999 Kč –5 %
784 Kč excl. VAT
949 Kč / pcs

glycerine manometer with 0/16 bar range. Indicator diameter 100 mm with side connection G1/2". Glycerine filling makes it easier to read the measured pressure for pressure...

Code: GS06-15
Sealing ring TP-M20
Sealing ring TP-M20
Stock (10 pcs)
6 Kč excl. VAT
7 Kč / pcs

Sealing ring made of aluminium for thread M20 × 1.5; G 1/2".

Code: TP-M20
Pressure gauge glycerin side 0/10 bar - G1/2"
Tip
999 Kč –5 %
784 Kč excl. VAT
949 Kč / pcs

glycerine manometer with a range of 0/10 bar. Indicator diameter 100 mm with side connection G1/2". Glycerine filling makes it easier to read the measured pressure for pressure...

Code: GS06-14
Pressure gauge glycerin side -1/0 bar - G1/2"
Tip
999 Kč –5 %
784 Kč excl. VAT
949 Kč / pcs

glycerine manometer with range -1/0 bar. Indicator diameter 100 mm with side connection G1/2". Glycerine filling makes it easier to read the measured pressure for pressure...

Code: GS06-01
Cover nut MP-G12
Cover nut MP-G12
Stock (5 pcs)
103 Kč excl. VAT
125 Kč / pcs

Nut in steel with G 1/2" thread.

Code: MP-G12
Side manometer 0/10 bar - 100 mm - 1/2"
441 Kč –4 %
346 Kč excl. VAT
419 Kč / pcs

Plastic manometer with 100 mm diameter, side thread connection G1/2" and 0/10 bar range. Designed for pressure measurements of non-aggressive media with lower demands on the...

Code: MS06-14
Manometer side 0/16 bar - 100 mm - 1/2"
441 Kč –4 %
346 Kč excl. VAT
419 Kč / pcs

Plastic manometer with 100 mm diameter gauge with side connection via G1/2" thread for pressure measurement from 0 to 16 bar. Designed for pressure measurements of...

Code: MS06-15
TRES well - 1/2" stem 63 / 18 mm
Original parts
1 084 Kč excl. VAT
1 312 Kč / pcs

The stainless steel thermometer sump with 1/2" thread serves as protection for the 63 mm thermometer stem and as a connection element. Designed for WIKA TW and TST thermometers.

Code: TRES-63
Manometer robust side 0/600 bar - 100 - 1/2"
Tip
924 Kč –4 %
726 Kč excl. VAT
878 Kč / pcs

Robust manometer with 100 mm stainless steel body with 1/2" side connection and measuring range 0/600 bar with 1.6% tolerance. Suitable for mechanically demanding applications...

Code: RS06-23
Pressure gauge glycerin side 0/2.5 bar - G1/2"
Tip
999 Kč –5 %
784 Kč excl. VAT
949 Kč / pcs

glycerine manometer with a range of 0/2.5 bar. Indicator diameter 100 mm with side connection G1/2". Glycerine filling makes it easier to read the measured pressure for pressure...

Code: GS06-11
Manometer robust side 0/16 bar - 100 - 1/2"
Tip
924 Kč –4 %
726 Kč excl. VAT
878 Kč / pcs

Robust manometer with 100 mm diameter stainless steel body with 1/2" side connection and measuring range 0/16 bar with 1.6% deviation. Suitable for mechanically demanding...

Code: RS06-15
Side manometer 0/40 bar - 100 mm - 1/2"
441 Kč –4 %
346 Kč excl. VAT
419 Kč / pcs

Plastic manometer with 100 mm diameter gauge with side connection via G1/2" thread for pressure measurement with a range of 0 to 40 bar. Designed for pressure measurements of...

Code: MS06-17
Side manometer 0/2.5 bar - 100 mm - 1/2"
441 Kč –4 %
346 Kč excl. VAT
419 Kč / pcs

Plastic manometer with 100 mm diameter gauge with side connection via G1/2" thread for pressure measurement with a range of 0 to 2.5 bar. Designed for pressure measurements of...

Code: MS06-11
Pressure gauge glycerin side 0/25 bar - G1/2"
Tip
999 Kč –5 %
784 Kč excl. VAT
949 Kč / pcs

glycerine manometer with 0/25 bar range. Indicator diameter 100 mm with side connection G1/2". Glycerine filling makes it easier to read the measured pressure for pressure...

Code: GS06-16
Pressure gauge glycerin side 0/1 bar - G1/2"
Tip
999 Kč –5 %
784 Kč excl. VAT
949 Kč / pcs

glycerine manometer with 0/1 bar range. Indicator diameter 100 mm with side connection G1/2". Glycerine filling makes it easier to read the measured pressure for pressure...

Code: GS06-09
Glycerin manometer side 0/1.6 bar - G1/2"
Tip
999 Kč –5 %
784 Kč excl. VAT
949 Kč / pcs

glycerine manometer with a range of 0/1.6 bar. Indicator diameter 100 mm with side connection G1/2". Glycerine filling makes it easier to read the measured pressure for pressure...

Code: GS06-10
Pressure gauge glycerin side 0/600 bar - G1/2"
Tip
999 Kč –5 %
784 Kč excl. VAT
949 Kč / pcs

glycerine manometer with 0/600 bar range. Indicator diameter 100 mm with side connection G1/2". Glycerine filling makes it easier to read the measured pressure for pressure...

Code: GS06-23
Pressure gauge glycerin side 0/40 bar - G1/2"
Tip
999 Kč –5 %
784 Kč excl. VAT
949 Kč / pcs

glycerine manometer with 0/40 bar range. Indicator diameter 100 mm with side connection G1/2". Glycerine filling makes it easier to read the measured pressure for pressure...

Code: GS06-17
Glycerin manometer side 0/100 bar - G1/2"
Tip
999 Kč –5 %
784 Kč excl. VAT
949 Kč / pcs

glycerine manometer with a range of 0/100 bar. Indicator diameter 100 mm with side connection G1/2". Glycerine filling makes it easier to read the measured pressure for pressure...

Code: GS06-19
Pressure gauge glycerine side 0/160 bar - G1/2"
Tip
999 Kč –5 %
784 Kč excl. VAT
949 Kč / pcs

glycerine manometer with 0/160 bar range. Indicator diameter 100 mm with side connection G1/2". Glycerine filling makes it easier to read the measured pressure for pressure...

Code: GS06-20
Pressure gauge glycerin side 0/60 bar - G1/2"
Tip
999 Kč –5 %
784 Kč excl. VAT
949 Kč / pcs

glycerine manometer with 0/60 bar range. Indicator diameter 100 mm with side connection G1/2". Glycerine filling makes it easier to read the measured pressure for pressure...

Code: GS06-18
Side manometer 0/160 bar - 100 mm - 1/2"
441 Kč –4 %
346 Kč excl. VAT
419 Kč / pcs

Plastic manometer with 100 mm diameter gauge with side connection via G1/2" thread for pressure measurement from 0 to 160 bar. Designed for pressure measurements of...

Code: MS06-20
Test pressure gauge tap KZ-G12
988 Kč excl. VAT
1 196 Kč / pcs

The working pressure is 25 bar. Connection is G 1/2". The body of the tap is made of brass.

Code: KZ-G12
Manometer robust side 0/400 bar - 100 - 1/2"
Tip
924 Kč –4 %
726 Kč excl. VAT
878 Kč / pcs

Robust manometer with 100 mm diameter stainless steel body with 1/2" side connection and measuring range 0/400 bar with 1.6% tolerance. Suitable for mechanically demanding...

Code: RS06-22
Shut-off pressure gauge cock KM-G12
836 Kč excl. VAT
1 012 Kč / pcs

The working pressure is 25 bar. Connection is G 1/2". The body of the tap is made of brass.

Code: KM-G12
Manometer robust side 0/10 bar - 100 - 1/2"
Tip
924 Kč –4 %
726 Kč excl. VAT
878 Kč / pcs

Robust manometer with 100 mm stainless steel body with 1/2" side connection and measuring range 0/10 bar with 1.6% deviation. Suitable for mechanically demanding applications...

Code: RS06-14
Thermometer aluminum pointer 100 mm (0°C/+120°C) stem 200 mm
1 312 Kč excl. VAT
1 587 Kč / pcs

TWALL aluminium thermometer with 100 mm diameter pointer and temperature range from 0 to 120°C. Rear version of the thermometer with 200 mm long sump and 1/2" threaded...

Code: TWAL100-120-200
Manometer robust side 0/160 bar - 100 mm - 1/2"
3 910 Kč excl. VAT
4 731 Kč / pcs

The rugged MRS manometer with a 100 mm pointer diameter is designed to measure the pressure of non-aggressive media in the range of 0 to 160 bar. This shockproof instrument...

Code: MRS120
Pressure gauge stainless side 0/6 bar - 100 mm - 1/2"
2 975 Kč excl. VAT
3 600 Kč / pcs

Stainless steel manometer with 100 mm indicator with pressure measurement range 0/6 bar with 1.0% deviation. Side connection 1/2". Suitable for demanding aggressive media for...

Code: MNS313
Manometer side 0/1 bar - 100 mm - 1/2"
441 Kč –4 %
346 Kč excl. VAT
419 Kč / pcs

Plastic manometer with 100 mm diameter gauge with side connection via G1/2" thread for pressure measurement in the range of 0 to 1 bar. Designed for pressure measurements of...

Code: MS06-09
Side manometer 0/400 bar - 100 mm - 1/2"
441 Kč –4 %
346 Kč excl. VAT
419 Kč / pcs

Plastic manometer with 100 mm diameter gauge with side connection via G1/2" thread for pressure measurement from 0 to 400 bar. Designed for pressure measurements of...

Code: MS06-22
Manometer robust side -1/3 bar - 100 mm - 1/2"
2 659 Kč excl. VAT
3 217 Kč / pcs

The rugged MRS manometer with a 100 mm pointer diameter is designed to measure the vacuum of non-aggressive media in the range -1 to 3 bar. This shockproof instrument offers...

Code: MRS104
Thermometer aluminum pointer 63 mm (-0°C/+60°C) stem 40 mm
585 Kč excl. VAT
708 Kč / pcs

Aluminium thermometer TWALL with 63 mm diameter pointer and temperature range from 0 to 60°C. Rear version of the thermometer with 40 mm long thermowell and 1/2" threaded...

Code: TWAL63-60-040
Pressure gauge stainless side 0/25 bar - 100 mm - 1/2"
2 975 Kč excl. VAT
3 600 Kč / pcs

Stainless steel gauge with 100 mm indicator with pressure measurement range 0/25 bar with 1.0% deviation. Side connection 1/2". Suitable for demanding aggressive media for...

Code: MNS316
Manometer robust rear 0/400 bar - 100 mm - 1/2"
4 481 Kč excl. VAT
5 422 Kč / pcs

Robust manometer with 100 mm diameter steel body with 1/2" rear connection and measuring range 0/400 bar with 1% deviation. Suitable for mechanically demanding applications for...

Code: MRZ222
Manometer robust side 0/25 bar - 100 - 1/2"
Tip
924 Kč –4 %
726 Kč excl. VAT
878 Kč / pcs

Robust manometer with 100 mm diameter stainless steel body with 1/2" side connection and measuring range 0/25 bar with 1.6% deviation. Suitable for mechanically demanding...

Code: RS06-16
Side manometer 0/250 bar - 100 mm - 1/2"
441 Kč –4 %
346 Kč excl. VAT
419 Kč / pcs

Plastic manometer with 100 mm diameter gauge with side connection via G1/2" thread for pressure measurement from 0 to 250 bar. Designed for pressure measurements of...

Code: MS06-21
Manometer side -1/0 bar - 100 mm - 1/2"
441 Kč –4 %
346 Kč excl. VAT
419 Kč / pcs

Plastic manometer with 100 mm diameter gauge with side connection via G1/2" thread for pressure measurement from -1 to 0 bar. Designed for pressure measurements of...

Code: MS06-01
Up
More products