Proceed to cart
Customer support:311 532 091info@kompresory-vzduchotechnika.cz
    Currency
    CZK
    Language
    English
    Home / Measuring technology

    Measurement of pressure and temperature of the medium

    In the measuring technology category you will find pressure gauges for measuring the pressure of compressed media in various designs. We offer from simple plastic gauges with an accuracy of 2.5%, to robust stainless steel gauges with an excellent accuracy of 0.6% deviation. You can measure the temperature of the medium using industrial thermometers, which are also included in the offer. Pressure transducers with various switching, switching on, switching off or switching on functions are used for sensing the pressure and subsequent conversion to an analogue electrical signal. If you have special requirements for measuring complex media and high temperatures, send us an enquiry and if you simply want to find out more about the range and how to choose a manometer, thermometer and sensor, click on continue.

    #ShowMore#

    Choosing the right type of manometer

    When selecting a manometer, we recommend that you consider the following aspects - connection, scale range, mechanical resistance and display accuracy. If you really need the most accurate pressure gauge, choose the one in glycerine. We offer instruments with standard accuracy classes of 0.6%, 1.0%, 1.6%, 2.5%, and on request we can also supply even higher accuracy types with panel mounting - these are not variants standing on a fixed thread in a free space. For more detailed information on choosing the right pressure gauge, see this article from our advice section: how to choose a pressure gauge

    WIKA thermometers

    Are you choosing a technical thermometer for industry and other areas? For aggressive media, we recommend thermometers in stainless steel with a maximum medium pressure per sump (recommended for increased lifetime of type A) of less than 25 bar, for non-aggressive media you can use the aluminium version of the thermometer, where the recommended maximum medium pressure per sump is 6 atmospheres.

    Pressure sensors and switches

    Pressure transducers and switches are used to convert pressure into an analogue signal - you can use them especially in automation technology when you are about to connect other devices. Pressure switches se see to it that he has compressed air the pressure you need in the airlock. Switch monitors the pressure in the airbox and when the pressure drops below the set lower limit, the switch will turn on and engage the electrical circuit. This starts the electric motor that drives the compressor. A comprehensive article on pressure switches can be found here: How to pressure switches

    Bestsellers

    Manometer rear 0/10 bar - 40 - 1/8"
    198 Kč –5 %
    Manometer rear 0/10 bar - 40 - 1/8"
    Stock (6 pcs)
    Code: MZ01-14
    Was: 198 Kč  (–5 %)
    188 Kč
    (155 Kč excl. VAT)
    Sealing ring TP-M12
    Sealing ring TP-M12
    Stock (20 pcs)
    Code: TP-M12
     
    7 Kč
    (6 Kč excl. VAT)
    Manometer rear 0/16 bar - 40 - 1/8"
    198 Kč –5 %
    Manometer rear 0/16 bar - 40 - 1/8"
    Stock (486 pcs)
    Code: MZ01-15
    Was: 198 Kč  (–5 %)
    188 Kč
    (155 Kč excl. VAT)
    Pressure gauge glycerin side 0/160 bar - G1/4"
    451 Kč –4 %
    Pressure gauge glycerin side 0/160 bar - G1/4"
    Stock (61 pcs)
    Code: GS04-20
    Was: 451 Kč  (–4 %)
    429 Kč
    (355 Kč excl. VAT)
    Manometer cover GOMB-100
    Manometer cover GOMB-100
    Stock (6 pcs)
    Code: GOMB-100
     
    306 Kč
    (253 Kč excl. VAT)
    Pressure gauge glycerin side 0/10 bar - G1/2"
    1 049 Kč –4 %
    Pressure gauge glycerin side 0/10 bar - G1/2"
    Stock (12 pcs)
    Code: GS06-14
    Was: 1 049 Kč  (–4 %)
    997 Kč
    (824 Kč excl. VAT)
    drss wika snimac senzor tlaku vzduch prevodnik
    754 Kč –5 %
    Pressure switch - switch - 10 / 70 bar
    Stock (6 pcs)
    Code: DRSS-70
    Was: 754 Kč  (–5 %)
    716 Kč
    (592 Kč excl. VAT)
    Manometer rear 0/10 bar - 50 mm - 1/4"
    216 Kč –5 %
    Manometer rear 0/10 bar - 50 mm - 1/4"
    up to 14 days
    Code: MZ03-14
    Was: 216 Kč  (–5 %)
    205 Kč
    (169 Kč excl. VAT)
    drss wika snimac senzor tlaku vzduch prevodnik
    633 Kč –4 %
    Pressure switch - switch - 0.3 / 2 bar
    Stock (2 pcs)
    Code: DRSS-2
    Was: 633 Kč  (–4 %)
    602 Kč
    (498 Kč excl. VAT)
    Manometer side 0/10 bar - 50 mm - 1/4"
    198 Kč –5 %
    Manometer side 0/10 bar - 50 mm - 1/4"
    Stock (255 pcs)
    Code: MS03-14
    Was: 198 Kč  (–5 %)
    188 Kč
    (155 Kč excl. VAT)
    Show more products
    931 items total
    Manometer side 0/10 bar - 40 - 1/8"
    198 Kč –5 %
    Manometer side 0/10 bar - 40 - 1/8"
    Stock (564 pcs)
    155 Kč excl. VAT
    188 Kč / pcs

    Plastic manometer with 40 mm diameter, side thread connection G1/8" and 0/10 bar range. Designed for pressure measurements of non-aggressive media with lower demands on the...

    Code: MS01-14
    Manometer rear 0/10 bar - 40 - 1/8"
    198 Kč –5 %
    Manometer rear 0/10 bar - 40 - 1/8"
    Stock (6 pcs)
    155 Kč excl. VAT
    188 Kč / pcs

    Plastic manometer with 40 mm diameter, G1/8" rear thread connection and 0/10 bar range. Designed for pressure measurements of non-aggressive media with lower demands on the...

    Code: MZ01-14
    Manometer cover GOMB-63
    62 Kč –4 %
    Manometer cover GOMB-63
    Stock (8 pcs)
    49 Kč excl. VAT
    59 Kč / pcs

    The diameter of the cover is 63 mm. It is suitable for applications with higher demands on instrument life.

    Code: GOMB-63
    Pressure gauge glycerin back 0/100 bar - G1/4"
    Tip
    451 Kč –4 %
    Pressure gauge glycerin back 0/100 bar - G1/4"
    Stock (5 pcs)
    355 Kč excl. VAT
    429 Kč / pcs

    glycerine manometer with a range of 0/100 bar. Pointer diameter 63 mm with 1/4" rear connection. Glycerine filling makes it easier to read the measured pressure for pressure...

    Code: GZ04-19
    Pressure gauge glycerin side 0/16 bar - G1/4"
    Tip
    451 Kč –4 %
    Pressure gauge glycerin side 0/16 bar - G1/4"
    Stock (25 pcs)
    355 Kč excl. VAT
    429 Kč / pcs

    glycerine manometer with 0/16 bar range. Pointer diameter 63 mm with 1/4" side connection. Glycerine filling makes it easier to read the measured pressure for pressure surges....

    Code: GS04-15
    Manometer rear 0/16 bar - 40 - 1/8"
    198 Kč –5 %
    Manometer rear 0/16 bar - 40 - 1/8"
    Stock (486 pcs)
    155 Kč excl. VAT
    188 Kč / pcs

    Plastic manometer with 40 mm diameter, G1/8" rear thread connection and 0/16 bar range. Designed for pressure measurements of non-aggressive media with lower demands on the...

    Code: MZ01-15
    Pressure gauge glycerin rear 0/16 bar - G1/4"
    Tip
    451 Kč –4 %
    Pressure gauge glycerin rear 0/16 bar - G1/4"
    Stock (78 pcs)
    355 Kč excl. VAT
    429 Kč / pcs

    glycerine manometer with 0/16 bar range. Pointer diameter 63 mm with 1/4" rear connection. Glycerine filling makes it easier to read the measured pressure for pressure surges....

    Code: GZ04-15
    Pressure gauge glycerin side 0/60 bar - G1/4"
    Tip
    451 Kč –4 %
    Pressure gauge glycerin side 0/60 bar - G1/4"
    Stock (13 pcs)
    355 Kč excl. VAT
    429 Kč / pcs

    glycerine manometer with 0/60 bar range. Pointer diameter 63 mm with 1/4" side connection. Glycerine filling makes it easier to read the measured pressure for pressure surges....

    Code: GS04-18
    Pressure gauge glycerin rear 0/4 bar - G1/4"
    Tip
    451 Kč –4 %
    Pressure gauge glycerin rear 0/4 bar - G1/4"
    Stock (57 pcs)
    355 Kč excl. VAT
    429 Kč / pcs

    glycerine manometer with 0/4 bar range. Pointer diameter 63 mm with 1/4" rear connection. Glycerine filling makes it easier to read the measured pressure for pressure surges....

    Code: GZ04-12
    Pressure gauge glycerin side 0/40 bar - G1/4"
    Tip
    451 Kč –4 %
    Pressure gauge glycerin side 0/40 bar - G1/4"
    Stock (29 pcs)
    355 Kč excl. VAT
    429 Kč / pcs

    glycerine manometer with 0/40 bar range. Pointer diameter 63 mm with 1/4" side connection. Glycerine filling makes it easier to read the measured pressure for pressure surges....

    Code: GS04-17
    Pressure gauge glycerin rear 0/6 bar - G1/4"
    Tip
    451 Kč –4 %
    Pressure gauge glycerin rear 0/6 bar - G1/4"
    Stock (63 pcs)
    355 Kč excl. VAT
    429 Kč / pcs

    glycerine manometer with 0/6 bar range. Pointer diameter 63 mm with 1/4" rear connection. Glycerine filling makes it easier to read the measured pressure for pressure surges....

    Code: GZ04-13
    Pressure gauge glycerin side 0/4 bar - G1/4"
    Tip
    451 Kč –4 %
    Pressure gauge glycerin side 0/4 bar - G1/4"
    Stock (46 pcs)
    355 Kč excl. VAT
    429 Kč / pcs

    glycerine manometer with 0/4 bar range. Pointer diameter 63 mm with 1/4" side connection. Glycerine filling makes it easier to read the measured pressure for pressure surges....

    Code: GS04-12
    Manometer side 0/2.5 bar - 63 mm - 1/4"
    216 Kč –5 %
    Manometer side 0/2.5 bar - 63 mm - 1/4"
    Stock (108 pcs)
    169 Kč excl. VAT
    205 Kč / pcs

    Plastic manometer with 63 mm diameter gauge with side connection via G1/4" thread for pressure measurement with a range of 0 to 2.5 bar. Designed for pressure measurements of...

    Code: MS04-11
    Pressure gauge glycerin rear 0/2.5 bar - G1/4"
    Tip
    451 Kč –4 %
    Pressure gauge glycerin rear 0/2.5 bar - G1/4"
    Stock (28 pcs)
    355 Kč excl. VAT
    429 Kč / pcs

    glycerine manometer with a range of 0/2.5 bar. Pointer diameter 63 mm with 1/4" rear connection. Glycerine filling makes it easier to read the measured pressure for pressure...

    Code: GZ04-11
    Pressure gauge glycerin side -1/0 bar - G1/4"
    Tip
    451 Kč –4 %
    Pressure gauge glycerin side -1/0 bar - G1/4"
    Stock (37 pcs)
    355 Kč excl. VAT
    429 Kč / pcs

    glycerine manometer with range -1/0 bar. Pointer diameter 63 mm with 1/4" side connection. Glycerine filling makes it easier to read the measured pressure for pressure surges....

    Code: GS04-01
    Pressure gauge glycerin rear 0/1.6 bar - G1/4"
    Tip
    451 Kč –4 %
    Pressure gauge glycerin rear 0/1.6 bar - G1/4"
    Stock (15 pcs)
    355 Kč excl. VAT
    429 Kč / pcs

    glycerine manometer with a range of 0/1.6 bar. Pointer diameter 63 mm with 1/4" rear connection. Glycerine filling makes it easier to read the measured pressure for pressure...

    Code: GZ04-10
    drss wika snimac senzor tlaku vzduch prevodnik
    Tip
    754 Kč –5 %
    Pressure switch - switch - 10 / 70 bar
    Stock (6 pcs)
    592 Kč excl. VAT
    716 Kč / pcs

    Pressure switch with switching function for pressure range -10 to -70 bar with flat connector. Designed for non-aggressive fluids : hydraulic oil, air, water, oil emulsions....

    Code: DRSS-70
    drso wika snimac senzor tlaku vzduch prevodnik
    Tip
    754 Kč –5 %
    Pressure switch - disconnecting - 10 / 70 bar
    Stock (2 pcs)
    592 Kč excl. VAT
    716 Kč / pcs

    Pressure switch with release function for pressure range -10 to 70 bar with flat connector. Designed for non-aggressive fluids : hydraulic oil, air, water, oil emulsions....

    Code: DRSO-70
    Manometer cover GOMB-50
    74 Kč –5 %
    Manometer cover GOMB-50
    Stock (10 pcs)
    58 Kč excl. VAT
    70 Kč / pcs

    The diameter of the cover is 50 mm. It is suitable for applications with higher demands on instrument life.

    Code: GOMB-50
    Manometer rear 0/16 bar - 50 mm - 1/4"
    216 Kč –5 %
    Manometer rear 0/16 bar - 50 mm - 1/4"
    Stock (130 pcs)
    169 Kč excl. VAT
    205 Kč / pcs

    Plastic manometer with 50 mm diameter gauge with rear connection via G1/4" thread for pressure measurement from 0 to 16 bar. Designed for pressure measurements of non-aggressive...

    Code: MZ03-15
    Manometer rear 0/40 bar - 50 mm - 1/4"
    216 Kč –5 %
    Manometer rear 0/40 bar - 50 mm - 1/4"
    Stock (188 pcs)
    169 Kč excl. VAT
    205 Kč / pcs

    Plastic manometer with 50 mm diameter gauge with rear connection via G1/4" thread for pressure measurement from 0 to 40 bar. Designed for pressure measurements of non-aggressive...

    Code: MZ03-17
    Manometer rear 0/60 bar - 50 mm - 1/4"
    216 Kč –5 %
    Manometer rear 0/60 bar - 50 mm - 1/4"
    Stock (195 pcs)
    169 Kč excl. VAT
    205 Kč / pcs

    Plastic manometer with 50 mm diameter gauge with rear connection via G1/4" thread for pressure measurement from 0 to 60 bar. Designed for pressure measurements of non-aggressive...

    Code: MZ03-18
    drss wika snimac senzor tlaku vzduch prevodnik
    Tip
    633 Kč –4 %
    Pressure switch - switch - 1 / 10 bar
    Stock (8 pcs)
    498 Kč excl. VAT
    602 Kč / pcs

    Pressure switch with switching function for pressure range -1 to -10 bar with flat connector. Designed for non-aggressive fluids : hydraulic oil, air, water, oil emulsions....

    Code: DRSS-10
    Manometer rear 0/10 bar - 63 mm - 1/4"
    237 Kč –5 %
    Manometer rear 0/10 bar - 63 mm - 1/4"
    Stock (212 pcs)
    186 Kč excl. VAT
    225 Kč / pcs

    Plastic manometer with 63 mm diameter gauge with rear connection via G1/4" thread for pressure measurement from 0 to 10 bar. Designed for pressure measurements of non-aggressive...

    Code: MZ04-14
    Pressure gauge glycerin rear 0/160 bar - G1/4"
    Tip
    451 Kč –4 %
    Pressure gauge glycerin rear 0/160 bar - G1/4"
    Stock (24 pcs)
    355 Kč excl. VAT
    429 Kč / pcs

    glycerine manometer with 0/160 bar range. Pointer diameter 63 mm with 1/4" rear connection. Glycerine filling makes it easier to read the measured pressure for pressure surges....

    Code: GZ04-20
    Manometer side 0/1.6 bar - 63 mm - 1/4"
    216 Kč –5 %
    Manometer side 0/1.6 bar - 63 mm - 1/4"
    Stock (31 pcs)
    169 Kč excl. VAT
    205 Kč / pcs

    Plastic manometer with 63 mm diameter gauge with side connection via G1/4" thread for pressure measurement from 0 to 1.6 bar. Designed for pressure measurements of...

    Code: MS04-10
    Manometer side 0/10 bar - 50 mm - 1/4"
    198 Kč –5 %
    Manometer side 0/10 bar - 50 mm - 1/4"
    Stock (255 pcs)
    155 Kč excl. VAT
    188 Kč / pcs

    Plastic manometer with 50 mm diameter gauge with side connection via G1/4" thread for pressure measurement with a range of 0 to 10 bar. Designed for pressure measurements of...

    Code: MS03-14
    Manometer for panel with clamp 0/10 bar - 1/8" - 40 mm
    616 Kč –5 %
    Manometer for panel with clamp 0/10 bar - 1/8" - 40 mm
    Stock (2 pcs)
    483 Kč excl. VAT
    585 Kč / pcs

    Panel mounted clamp-on gauges with 40 mm diameter, 0 to 10 bar range and 1/8" pipe thread connection. Compressed pressure measurement for easy mounting to machine panels,...

    Code: MFRE40-10
    Manometer for panel with clamp 0/6 bar - 1/8" - 40 mm
    616 Kč –5 %
    Manometer for panel with clamp 0/6 bar - 1/8" - 40 mm
    Stock (2 pcs)
    483 Kč excl. VAT
    585 Kč / pcs

    Panel mounted clamp-on gauges with 40 mm diameter, 0 to 6 bar range and 1/8" pipe thread connection. Compressed pressure measurement for easy mounting to machine panels,...

    Code: MFRE40-6
    Manometer for panel with clamp 0/16 bar - 1/4" - 50 mm
    616 Kč –5 %
    Manometer for panel with clamp 0/16 bar - 1/4" - 50 mm
    Stock (2 pcs)
    483 Kč excl. VAT
    585 Kč / pcs

    Manometers with 50 mm diameter panel mounting bracket with 0 to 16 bar range and 1/4" pipe thread connection. Compressed pressure measurement for easy attachment to machine...

    Code: MFRE50-16
    Manometer for panel with clamp 0/1 bar - 1/8" - 40 mm
    616 Kč –5 %
    Manometer for panel with clamp 0/1 bar - 1/8" - 40 mm
    Stock (18 pcs)
    483 Kč excl. VAT
    585 Kč / pcs

    Panel mounted clamp-on gauges with 40 mm diameter, 0 to 1 bar range and 1/8" pipe thread connection. Compressed pressure measurement for easy mounting to machine panels,...

    Code: MFRE40-1
    Manometer for panel with clamp 0/4 bar - 1/4" - 50 mm
    616 Kč –5 %
    Manometer for panel with clamp 0/4 bar - 1/4" - 50 mm
    Stock (1 pcs)
    483 Kč excl. VAT
    585 Kč / pcs

    Manometers with 50 mm diameter panel mounting bracket with 0 to 4 bar range and 1/4" pipe thread connection. Compressed pressure measurement for easy attachment to machine...

    Code: MFRE50-4
    Manometer for panel with clamp 0/2.5 bar - 1/4" - 63 mm
    623 Kč –4 %
    Manometer for panel with clamp 0/2.5 bar - 1/4" - 63 mm
    Stock (2 pcs)
    489 Kč excl. VAT
    592 Kč / pcs

    Panel mounted clamp-on gauges with 63 mm diameter, 0 to 2.5 bar range and 1/4" pipe thread connection. Compressed pressure measurement for easy attachment to machine panels,...

    Code: MFRE63-2-5
    Pressure gauge for panel with clamp -1/0 bar - 1/4" - 63 mm
    623 Kč –4 %
    Pressure gauge for panel with clamp -1/0 bar - 1/4" - 63 mm
    Stock (2 pcs)
    489 Kč excl. VAT
    592 Kč / pcs

    Panel mounted clamp-on gauges with 63 mm diameter, -1 to 0 bar range and 1/4" pipe thread connection. Compressed pressure measurement for easy attachment to machine panels,...

    Code: MFRE63-V
    Manometer for panel with clamp 0/10 bar - 1/4" - 63 mm
    623 Kč –4 %
    Manometer for panel with clamp 0/10 bar - 1/4" - 63 mm
    Stock (2 pcs)
    489 Kč excl. VAT
    592 Kč / pcs

    Panel mounted clamp-on gauges with 63 mm diameter, 0 to 10 bar range and 1/4" pipe thread connection. Compressed pressure measurement for easy attachment to machine panels,...

    Code: MFRE63-10
    Manometer rear 0/4 bar - 63 mm - 1/4"
    237 Kč –5 %
    Manometer rear 0/4 bar - 63 mm - 1/4"
    Stock (129 pcs)
    186 Kč excl. VAT
    225 Kč / pcs

    Plastic manometer with 63 mm diameter gauge with rear connection via G1/4" thread for pressure measurements from 0 to 4 bar. Designed for pressure measurements of non-aggressive...

    Code: MZ04-12
    Pressure gauge for oxygen side 0/315 bar - 63 mm - 1/4"
    516 Kč –3 %
    Pressure gauge for oxygen side 0/315 bar - 63 mm - 1/4"
    Stock (2 pcs)
    413 Kč excl. VAT
    500 Kč / pcs

    Pressure gauge for technical gas Oxygen with 63 mm pointer and pressure measurement range 0/315 bar with 2.5% deviation. Side connection 1/4". Suitable technical gases are...

    Code: MOX63-315
    Sealing ring TP-M12
    Sealing ring TP-M12
    Stock (20 pcs)
    6 Kč excl. VAT
    7 Kč / pcs

    Sealing ring made of aluminium for thread M12 × 1.5; G 1/4".

    Code: TP-M12
    kryt wika snimac senzor tlaku vzduch prevodnik
    Original parts
    92 Kč –5 %
    Protective cap - Overpressure
    Stock (3 pcs)
    72 Kč excl. VAT
    87 Kč / pcs

    Protective cap - Overpressure - DRSB. Designed for non-aggressive fluids : hydraulic oil, air, water, oil emulsions. Switching differential from 15 to 20%, IP65 protection,...

    Code: DRSB
    Manometer rear 0/1.6 bar - 63 mm - 1/4"
    237 Kč –5 %
    Manometer rear 0/1.6 bar - 63 mm - 1/4"
    Stock (85 pcs)
    186 Kč excl. VAT
    225 Kč / pcs

    Plastic manometer with 63 mm diameter gauge with rear connection via G1/4" thread for pressure measurement from 0 to 1.6 bar. Designed for pressure measurements of...

    Code: MZ04-10
    Up
    More products