Lüdecke, Page 27

Společnost, která myslí na své zákazníky 

Německá firma LÜDECKE GmbH vznikla roku 1930 a od svých začátků se soustředí na výrobu flexibilních spojovacích systémů, jako jsou rychlospojky a šroubení pro nejrůznější nosná média. Ve městě Amberg tak pravidelně vzniká na 30 000 tisíc kvalitních výrobků určených zejména pro nízkotlaké systémy. Produkty značky LÜDECKE tak od svých začátku směle konkurují ostatním německým a světovým gigantům, kteří působí ve stejném oboru. Dnes se tyto spojky distribuují po celém světě a svou spolehlivost si zákazníci ověřili ve více než 120 zemích. LÜDECKE celkově dbá na zpětnou vazbu od svých zákazníků a snaží se s nimi být v co nejužším kontaktu, aby mohl sbírat nové podněty pro další inovaci konstrukcí a postupů, které se aplikují na těch nejmodernějších strojích.

PlatzhalterOhne_1

 

Header_48

Zelené myšlení netratí na kvalitě

Jako osvědčený mezinárodní důkaz, který orientovanému zákazníkovi napoví o kvalitě výrobku, slouží nejrůznější certifikační systémy. Samozřejmě i výrobky firmy LÜDECKE se mohou pochlubit certifikací podle ISO 9001-2008, ale to není vše, prioritně se totiž společnost snaží šetřit životní prostředí a čerpá z ekologicky udržitelných prostředků, díky čemuž roku 2015 získala certifikát o šetrnosti k životnímu prostředí ISO 14001-2004, k němuž se záhy připojilo další osvědčení, které bylo tentokrát z oblasti energetiky - ISO 50001-2011. Tři jakostní systémy  tak konečnému uživateli zaručují jak poctivou kvalitu vyrobenou na bezchybných strojích, tak i jistotu svědomitosti, s jakou byl produkt vyroben. 

Kompletní nabídku produktů LÜDECKE, které Vám nabízí Kompresory vzduchotechnika, naleznete níže

1572 items total
Nipple with 90° external thread M8 x 0.75
322 Kč –4 %
253 Kč excl. VAT
306 Kč / pcs

Nipple with 90° male thread M8x0,75 without valve. Optional full flow, single or double-sided closable. Made of brass MS 58 and 2.0401. Use for plastic machines and moulds with...

Code: ESHMC875-NA-90
Nipple with 90° external thread M5 x 0.5
298 Kč –5 %
234 Kč excl. VAT
283 Kč / pcs

Nipple with 90° male thread M5x0,5 without valve. Optional full flow, single or double-sided closable. Made of brass MS 58 and 2.0401. Use for plastic machines and moulds with...

Code: ESHMC505-NA-90
Nipple with external thread M8 x 0.75
453 Kč –5 %
355 Kč excl. VAT
430 Kč / pcs

Nipple with external thread M8x0,75 with valve. Optional full flow, single or double-sided closable. Made of brass MS 58 and 2.0401. Use for plastic machines and moulds with...

Code: ESHMC875NAAB
Nipple with external thread M5 x 0.5
425 Kč –4 %
334 Kč excl. VAT
404 Kč / pcs

Nipple with external thread M5x0,5 with valve. Optional full flow, single or double-sided closable. Made of brass MS 58 and 2.0401. Use for plastic machines and moulds with hot...

Code: ESHMC505NAAB
Nipple with external thread M8 x 0.75
122 Kč –4 %
96 Kč excl. VAT
116 Kč / pcs

Nipple with external thread M8x0,75 without valve. Optional full flow, single or double-sided closable. Made of brass MS 58 and 2.0401, nipple size 5mm. Use for plastic...

Code: ESHMC875NA
Nipple with external thread M5 x 0.5
109 Kč –4 %
86 Kč excl. VAT
104 Kč / pcs

Nipple with external thread M5x0,5 without valve. Optional full flow, single or double-sided closable. Made of brass MS 58 and 2.0401. Use for plastic machines and moulds with...

Code: ESHMC505NA
Nipple with mandrel for 5 mm hose
70 Kč –5 %
55 Kč excl. VAT
66 Kč / pcs

Nipple with hose shank 5 mm without valve. Optional full flow, single or double-sided closable. Made of brass MS 58 and 2.0401. Use for plastic machines and moulds with hot and...

Code: ESHMC5SL
Quick coupling with external thread M8 x 0.75
680 Kč –5 %
534 Kč excl. VAT
646 Kč / pcs

Quick coupling with external thread M8x0,75 with valve. Optional full flow, single or double-sided closable. Made of brass MS 58 and 2.0401. Use for plastic machines and moulds...

Code: ESHMC875AAB
Quick coupling with external thread M8 x 0.75
680 Kč –5 %
534 Kč excl. VAT
646 Kč / pcs

Quick coupling with external thread M8x0,75 without valve. Optional full flow, single or double-sided closable. Made of brass MS 58 and 2.0401. Use for plastic machines and...

Code: ESHMC875A
Quick coupling with external thread M5 x 0.5
680 Kč –5 %
534 Kč excl. VAT
646 Kč / pcs

Quick coupling with external thread M5x0,5 with valve. Optional full flow, single or double-sided closable. Made of brass MS 58 and 2.0401. Use for plastic machines and moulds...

Code: ESHMC505AAB
Quick coupling with external thread M5 x 0.5
680 Kč –5 %
534 Kč excl. VAT
646 Kč / pcs

Quick coupling with external thread M5x0,5 without valve. Optional full flow, single or double-sided closable. Made of brass MS 58 and 2.0401. Use for plastic machines and...

Code: ESHMC505A
Quick coupling with 90° mandrel for 5 mm hose
878 Kč –5 %
689 Kč excl. VAT
834 Kč / pcs

Quick coupling with 90° shank 5 mm with valve. Optional full flow, single or double-sided closable. Made of brass MS 58 and 2.0401. Use for plastic machines and moulds with hot...

Code: ESHMC5TL-90AB
Quick coupling with 90° mandrel for 5 mm hose
878 Kč –5 %
689 Kč excl. VAT
834 Kč / pcs

Quick coupling with 90° shank 5 mm without valve. Optional full flow, single or double-sided closable. Made of brass MS 58 and 2.0401. Use for plastic machines and moulds with...

Code: ESHMC5TL-90
Quick coupling with 45° mandrel on the hose
878 Kč –5 %
689 Kč excl. VAT
834 Kč / pcs

Quick coupling with 45° shank for 5 mm hose with valve. Optional full flow, single or double-sided closable. Made of brass MS 58 and 2.0401, nipple size 5mm. Use for plastic...

Code: ESHMC5TL-45AB
Quick coupling with 45° mandrel on the hose
878 Kč –5 %
689 Kč excl. VAT
834 Kč / pcs

Quick coupling with 45° shank 5 mm without valve. Optional full flow, single or double-sided closable. Made of brass MS 58 and 2.0401. Use for plastic machines and moulds with...

Code: ESHMC5TL-45
Quick coupling with straight mandrel for 5 mm hose
680 Kč –5 %
534 Kč excl. VAT
646 Kč / pcs

5 mm straight shank quick coupling with valve. Optional full flow, single or double-sided closable. Made of brass MS 58 and 2.0401. Use for plastic machines and moulds with hot...

Code: ESHMC5TLAB
Quick coupling with straight mandrel for 5 mm hose
680 Kč –5 %
534 Kč excl. VAT
646 Kč / pcs

Quick coupling with 5 mm straight shank without valve. Optional full flow, single or double-sided closable. Made of brass MS 58 and 2.0401. Use for plastic machines and moulds...

Code: ESHMC5TL
Nipple with mandrel for 13 mm hose
228 Kč –5 %
179 Kč excl. VAT
216 Kč / pcs

Nipple with hose barb 13 mm. Made of galvanized and chromated steel with perbunan NBR sealing. Extremely robust quick coupler that can withstand the most demanding use.

Code: F1K13S
Nipple with mandrel for 11mm hose
228 Kč –5 %
179 Kč excl. VAT
216 Kč / pcs

Nipple with 11mm hose barb. Made of galvanized and chromated steel with perbunan NBR sealing. Extremely robust quick coupler that can withstand the most demanding use.

Code: F1K11S
Nipple with mandrel for 9 mm hose
228 Kč –5 %
179 Kč excl. VAT
216 Kč / pcs

Nipple with 9mm hose barb. Made of galvanized and chromated steel with perbunan NBR sealing. Extremely robust quick coupler that can withstand the most demanding use.

Code: F1K9S
Nipple with mandrel for 6 mm hose
228 Kč –5 %
179 Kč excl. VAT
216 Kč / pcs

Nipple with hose barb 6 mm. Made of galvanized and chromated steel with perbunan NBR sealing. Extremely robust quick coupler that can withstand the most demanding use.

Code: F1K6S
Nipple with internal thread G3/8"
245 Kč –5 %
192 Kč excl. VAT
232 Kč / pcs

Nipple with female thread G3/8". Made of galvanized and chromated steel with perbunan NBR sealing. Extremely robust quick coupler that can withstand the most demanding use.

Code: F1K38GI
Nipple with internal thread G1/4"
245 Kč –5 %
192 Kč excl. VAT
232 Kč / pcs

Nipple with female thread G1/4". Made of galvanized and chromated steel with perbunan NBR sealing. Extremely robust quick coupler that can withstand the most demanding use.

Code: F1K14GI
Nipple with external thread G3/8"
245 Kč –5 %
192 Kč excl. VAT
232 Kč / pcs

Nipple with external thread G3/8". Made of galvanized and chromated steel with perbunan NBR sealing. Extremely robust quick coupler that can withstand the most demanding use.

Code: F1K38G
Quick coupler with external thread G1/2"
1 169 Kč –4 %
918 Kč excl. VAT
1 111 Kč / pcs

Quick coupling with external thread G1/2". Made of galvanized and chromated steel with perbunan NBR sealing. Extremely robust quick coupler that can withstand the most demanding...

Code: F12K
Quick coupler with external thread G3/8"
1 169 Kč –4 %
918 Kč excl. VAT
1 111 Kč / pcs

Quick coupling with external thread G3/8". Made of galvanized and chromated steel with perbunan NBR sealing. Extremely robust quick coupler that can withstand the most demanding...

Code: F1K
Nipple with mandrel for 13 mm hose
191 Kč –5 %
150 Kč excl. VAT
181 Kč / pcs

Robust ESCA nipple with 13 mm hose shank compatible with Atlas Copco systems. It is characterized by high flow rates while maintaining a low pressure gradient. Made with nickel...

Code: ESAC13SS
Nipple with mandrel for 8 mm hose
134 Kč –5 %
105 Kč excl. VAT
127 Kč / pcs

Robust ESCA nozzle with 8 mm hose barb compatible with Atlas Copco systems. It is characterized by high flow rates while maintaining a low pressure gradient. Made with nickel...

Code: ESAC8SS
Nipple with mandrel for 10 mm hose
166 Kč –4 %
131 Kč excl. VAT
158 Kč / pcs

Robust ESCA nipple with 10 mm hose shank compatible with Atlas Copco systems. It is characterized by high flow rates while maintaining a low pressure gradient. Made with nickel...

Code: ESAC10SS
Nipple with mandrel for 6 mm hose
134 Kč –5 %
105 Kč excl. VAT
127 Kč / pcs

Robust ESCA nipple with 6 mm hose shank compatible with Atlas Copco systems. It is characterized by high flow rates while maintaining a low pressure gradient. Made with nickel...

Code: ESAC6SS
Nipple with internal thread G1/2"
187 Kč –4 %
147 Kč excl. VAT
178 Kč / pcs

Robust nipple with G1/2" female thread compatible with Atlas Copco systems. It is characterized by high flow rates while maintaining a low pressure gradient. Made with nickel...

Code: ESAC12NIS
Nipple with internal thread G3/8"
141 Kč –4 %
111 Kč excl. VAT
134 Kč / pcs

Robust nipple with G3/8" female thread compatible with Atlas Copco systems. It is characterized by high flow rates while maintaining a low pressure gradient. Made with nickel...

Code: ESAC38NIS
Nipple with internal thread G1/4"
141 Kč –4 %
111 Kč excl. VAT
134 Kč / pcs

Robust nipple with G1/4" female thread compatible with Atlas Copco systems. It is characterized by high flow rates while maintaining a low pressure gradient. Made with nickel...

Code: ESAC14NIS
Nipple with internal thread G1/8"
141 Kč –4 %
111 Kč excl. VAT
134 Kč / pcs

Robust nipple with G1/8" female thread compatible with Atlas Copco systems. It is characterized by high flow rates while maintaining a low pressure gradient. Made with nickel...

Code: ESAC18NIS
Nipple with external thread R1/2"
178 Kč –5 %
140 Kč excl. VAT
169 Kč / pcs

Robust nipple with R1/2" male thread compatible with Atlas Copco systems. It is characterized by high flow rates while maintaining a low pressure gradient. Made with nickel...

Code: ESAC12NAS
Nipple with external thread R3/8"
141 Kč –4 %
111 Kč excl. VAT
134 Kč / pcs

Robust nipple with R3/8" male thread compatible with Atlas Copco systems. It is characterized by high flow rates while maintaining a low pressure gradient. Made with nickel...

Code: ESAC38NAS
Nipple with external thread R1/4"
141 Kč –4 %
111 Kč excl. VAT
134 Kč / pcs

Robust nipple with R1/4" male thread compatible with Atlas Copco systems. It is characterized by high flow rates while maintaining a low pressure gradient. Made with nickel...

Code: ESAC14NAS
Nipple with external thread R1/8"
141 Kč –4 %
111 Kč excl. VAT
134 Kč / pcs

Robust nipple with R1/8" male thread compatible with Atlas Copco systems. It is characterized by high flow rates while maintaining a low pressure gradient. Made with nickel...

Code: ESAC18NAS
Quick coupling with mandrel for hose 13 mm
782 Kč –4 %
614 Kč excl. VAT
743 Kč / pcs

Robust quick coupling with 13 mm hose shank compatible with Atlas Copco systems. It is characterized by high flow rates while maintaining a low pressure gradient. Made with...

Code: ESAC13T
Quick coupling with mandrel for 10 mm hose
761 Kč –4 %
598 Kč excl. VAT
723 Kč / pcs

Robust quick coupling with 10 mm hose shank compatible with Atlas Copco systems. It is characterized by high flow rates while maintaining a low pressure gradient. Made with...

Code: ESAC10T
Up
More products

Page 27 of 40 - 1572 items total