Air compressors, Page 9

A standalone 18.5 kW screw compressor delivering 2,590 l/min at 10 bar. It adds 375 litres per minute over the 15 kW and gives up 500 against the 22 kW — sitting exactly between...

The smallest in the SPINN Mini range and the cheapest way to leave a piston compressor behind in your workshop. The 2.2 kW motor delivers 294 l/min at 10 bar, that is 17.7 m³/h...

The first model in the range that can handle tools drawing air continuously — grinders, sandblasting guns, longer blasting jobs. The four-kilowatt motor delivers 516 l/min at 10...

The middle one of the three standalone units. It delivers 1,416 l/min at 10 bar, 420 l/min more than the 7.5 kW — and from the same 850 × 720 mm canopy. Noise 69 dB(A).

The strongest standalone unit in the range. 1,680 l/min at 10 bar from a fifteen-kilowatt motor, noise 71 dB(A). The canopy stays 850 × 720 mm as on the weaker models.

The strongest in the range. It regulates from 337 to 757 l/min, the widest range of all four models. It feeds several workstations at once. 200 l receiver, refrigerant dryer, 61...

The smallest machine at the top equipment level. It turns down to 130 l/min and up to 320, yet does everything the larger assemblies do — two-stage filtration, automatic...

The middle machine at the top equipment level. A 200–510 l/min range covers a workshop with several stations, and adds two-stage filtration, automatic condensate drainage and a...

The top equipment level and the largest machine. To the 3-in-1 assembly it adds two-stage filtration and automatic condensate handling — class 1-4-1 air to ISO 8573-1 and a...

The SCR-2/10XA is an oil-free scroll compressor with a free air delivery of 200 l/min (12 Nm³/h) at 10 bar and a total power input of 2.2 kW. The air is compressed by a single...

The SCR-4/10XA is an oil-free scroll compressor with a free air delivery of 350 l/min (21 Nm³/h) at 10 bar and a total power input of 3.7 kW. The air is compressed by a single...

The SCR-7/10XA is an oil-free scroll compressor with a free air delivery of 700 l/min (42 Nm³/h) at 10 bar and a total power input of 7.4 kW. The air is compressed by 2 scroll...

A timed condensate drain with a solenoid valve, an integrated ball valve and a cleanable screen. Adjustable opening and interval, two LEDs and a test button.

A two-stage pump on the A-series pulley — the step between workshop and industrial duty. Higher pressure than the single-stage pumps and more efficient compression.

The genuine oil for WALTER cast-iron GK pumps. The one-litre bottle suits topping up, and a full change on the smallest pump.

The five-litre pack of genuine WALTER oil. It covers a full change on every GK pump including the largest GK1400.

Set of fittings for complete installation of pressure vessel and air tank with volume of 100 L. The set includes the following products including all settings and documentation...

Complete ATMOS filter with cover and filter insert in round design with 1/2" external pipe thread for Bobby, Perfekt line 2,2/50XE, 2,2/50X, 2,2/90XE compressors. The suction...

A three-phase Condor for smaller workshop compressors. The connecting block has one inlet and three outlets, so a single port on the tank is enough.

The suction filter serves as protection against dirt entering the machine and should be replaced regularly. ATMOS compressors are supplied with suction filters as standard...

The most ordered three-phase Condor. It fits most mid-sized workshop compressors, and the block makes up for ports the tank does not have.

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 3/4" in length 1000 mm and straight ends.

The lightest machine of the range for one to two chairs. A twenty-five-litre receiver, 31 kilos and an oil-free pump without a dryer.

ST 110 Vario · 110 kW · delivery 19.1 / 17.6 / 15.3 / 13.2 m³/min · pressure 7.5 / 8.5 / 10 / 13 bar. Screw block SCA-20-G-R IE3 motor — high...

Eleven kilowatts on a base frame. Against the 7.5 kW machine it adds only nine per cent of air, but runs more easily and is 39 kg heavier.

A replacement oil sight glass for a compressor with a G 3/4" pipe thread. Outer diameter 31.5 mm, window 20 mm, tightened with a 27 mm spanner. Transparent PA-T technopolymer...