Air compressors, Page 17

The strongest relay in the ordinary pressure version. It covers motors at the very top of what an MDR 3 switch will handle at all.

A 1 1/2" rubber hose, 1.5 m long, with one straight end and a 90° elbow at the other for compressor stations. Working pressure 20 bar, two adaptors supplied.

A two-metre 1 1/2" rubber hose with a 90° elbow at one end for larger compressor stations. Working pressure 20 bar; swivel nuts and two male-thread adaptors supplied.

A long 1 1/2" rubber hose with one end bent at 90° for connecting a compressor to an air receiver over a greater distance. Working pressure 20 bar, two adaptors supplied.

A 1 1/4" rubber hose, 1.5 m long, with a 90° elbow at one end for larger compressor stations. Working pressure 20 bar; swivel nuts and two adaptors supplied.

A two-metre 1 1/4" rubber hose with one end bent at 90° for more powerful compressors. Working pressure 20 bar, supplied with two male-thread adaptors.

A long 1 1/4" rubber hose with a 90° elbow at one end for connecting a more powerful compressor to an air receiver over a greater distance. Working pressure 20 bar; swivel nuts...

A long 1" rubber hose with one end bent at 90° for a connection over a greater distance. Working pressure 20 bar; swivel nuts and two male-thread adaptors supplied.

A long 1/2" rubber hose with one end bent at 90° for connecting a compressor and an air receiver that do not stand side by side. Working pressure 20 bar; swivel nuts and two...

A 2" rubber hose, 1.5 m long, with a 90° elbow at one end for the largest compressors and air receivers. Working pressure 20 bar; swivel nuts and two adaptors supplied.

A two-metre 2" rubber hose with one end bent at 90° for connecting a large compressor to an air receiver. Working pressure 20 bar, supplied with two male-thread adaptors.

A long 2" rubber hose with a 90° elbow at one end for large compressor stations where the compressor stands further from the vessel. Working pressure 20 bar; swivel nuts and two...

A one-metre 3/4" rubber hose with one straight end and a 90° elbow at the other for a short connection in a tight space. Working pressure 20 bar, two adaptors supplied.

The highest-output machine in the whole range. A Kohler diesel engine, the largest B7000 pump, working up to fourteen bar.

A stationary machine on feet with an electric starter. The largest petrol engine in the range, ten bar.

The high-pressure version of the stationary machine: fourteen bar instead of ten, otherwise identical.

The highest intake among the petrol machines. The largest B7000 pump, working up to fourteen bar.

The only machine on offer with a built-in generator. It supplies compressed air and electric power at the same time.

The only diesel machine you can still push around a site. A 270-litre tank and manual start.

The largest wheeled machine in the range: a 270-litre tank and a petrol engine.

A fifty-litre tank and a Honda GX270 engine. The highest output you can still push around a site.

The only fifty-litre machine at fourteen bar. The same machine as the 50CP, but with a higher working pressure.

A float condensate drain for filters, pressure vessels and cyclone separators. It works mechanically, without electricity and without setting. Body made of stainless steel.

A float condensate drain for filters, pressure vessels and cyclone separators. It works mechanically, without electricity and without setting. Body made of brass.

A float condensate drain for filters, pressure vessels and cyclone separators. It works mechanically, without electricity and without setting. Body made of stainless steel.

The smallest machine of the range on a steel base frame. Fifteen bar in two stages, without a vessel — the air goes straight into the pipework or into a receiver you already own.

The smallest complete assembly of the range: a two-stage airend mounted on a horizontal ninety-litre receiver. Place it, connect the supply and the pipework.

The smallest machine of the twenty-bar range on a steel base frame. Twenty bar in two stages, no pressure vessel — the air goes straight into the pipework or into a receiver you...

The strongest machine of the category: fifteen kilowatts and over a thousand litres of air per minute at twenty bar. On a base frame, with star-delta starting.

A complete assembly: a two-stage airend mounted on a horizontal ninety-litre vessel. The machine arrives assembled — it only has to be placed and connected.

Two point two kilowatts on a base frame. The strongest machine of the range that still starts directly, without a star-delta sequence.

A complete assembly with a horizontal ninety-litre receiver and a direct start. The strongest machine of the range you can place and connect without dealing with star-delta.

Two point two kilowatts on a base frame. The strongest machine of the range that still starts directly, without star-delta starting.

The smallest machine of the category. The only one that starts directly — from four kilowatts up star-delta is a must.

Four kilowatts on a base frame with star-delta starting. A two-stage airend that delivers over four hundred litres a minute at a full fifteen bar.

Four kilowatts on a base frame with star-delta starting. The first machine of the range where the manufacturer softens the current peak at start-up.