Compressors with electric motor, Page 4

An eleven-kilowatt set with a 500-litre receiver and a refrigerant dryer. 1,416 l/min at 10 bar, 69 dB(A). Dry air for pipework serving several people at once.

The strongest standalone unit in the range. 1,680 l/min at 10 bar from a fifteen-kilowatt motor, noise 71 dB(A). The canopy stays 850 × 720 mm as on the weaker models.

The smallest complete set in the range: compressor, 270-litre receiver and refrigerant dryer in one frame. 696 l/min at 10 bar, 64 dB(A) — the quietest machine in the range. Dry...

Compressor, 500-litre receiver and refrigerant dryer in one unit. 996 l/min at 10 bar, 7.5 kW, 65 dB(A). Dry air and a reserve for peak demand without assembling a set.

Complete set for smaller operations with intermittent demand and dried air: compressor, tank, dryer and filters all in one unit. Housing 1,970 × 720 × 1,700 mm, weight 395 kg,...

Complete assembly for operation with multiple extraction points, where dried air and reserve capacity in the air tank are required. Dimensions 1,970 × 720 × 1,700 mm, G ¾″...

A complete setup for a workshop that wants dried and filtered air directly from the machine and doesn't want to assemble individual components. It weighs 382 kg, the connection...

Complete set for operation with higher consumption, where dried and filtered air is required directly from the machine. It weighs 421 kg, the connection is G ¾″ and the noise...

The smallest machine at the top equipment level. It turns down to 130 l/min and up to 320, yet does everything the larger assemblies do — two-stage filtration, automatic...

The middle machine at the top equipment level. A 200–510 l/min range covers a workshop with several stations, and adds two-stage filtration, automatic condensate drainage and a...

The SCR-2/10XA is an oil-free scroll compressor with a free air delivery of 200 l/min (12 Nm³/h) at 10 bar and a total power input of 2.2 kW. The air is compressed by a single...

The SCR-4/10XA is an oil-free scroll compressor with a free air delivery of 350 l/min (21 Nm³/h) at 10 bar and a total power input of 3.7 kW. The air is compressed by a single...

The SCR-7/10XA is an oil-free scroll compressor with a free air delivery of 700 l/min (42 Nm³/h) at 10 bar and a total power input of 7.4 kW. The air is compressed by 2 scroll...

Complete assembly in a larger enclosure for medium-duty operation requiring dried air from a single unit. Dimensions 1,970 × 760 × 1,750 mm, weight 487 kg, connection G ¾″,...

The most powerful and at the same time the heaviest assembly of the SFTG KSP series, for operation with higher consumption of dried air. Housing 1,970 × 760 × 1,750 mm, G ¾″...

A complete fixed-speed assembly for continuous consumption of dry air. The dryer and filters are integrated in a single unit with the compressor and air tank. Dimensions 1,970 ×...

The most powerful assembly in the SKTG KSP range for operation with higher but constant consumption of dried air. Housing 1,970 × 725 × 1,750 mm, weight 487 kg, connection G ¾″,...

A complete set for laser cutting: machine, air tank, dryer and five filters in one unit. It weighs 510 kg, the cabinet measures 1,970 × 860 × 1,660 mm and the noise level is 62...

The smallest and quietest compressor in the range: 0.75 kW, 6 l, 15 kg and 56 dB at 4 m. Oil-free, maintenance-free, for a standard socket — for inflating, blowing off and small...

The strongest machine of the category: fifteen kilowatts and over a thousand litres of air per minute at thirty bar. Twice what the eleven-kilowatt machine gives.

The entry screw compressor of the range, without a receiver. 320 l/min at ten bar, 180 kg and a footprint of just 0.39 m² — for a workshop that already has a receiver.

ST 55 Vario+ FD · 55 kW · delivery 8.9 / 8.7 / 8.1 / 7.6 m³/min · pressure 7.5 / 8.5 / 10 / 13 bar. Screw block A 150 5th generation (City University)...

ST 75 · 75 kW · delivery 12.7 / 12 / 10.8 / 9.3 m³/min · pressure 7.5 / 8.5 / 10 / 13 bar. Screw block SCA-14-G-R IE3 motor — high efficiency, multi-V...

E.65 KV in Comfort version (soundproof steel chassis), with 270 l air receiver (horizontal) · 7.5 kW · pressure 10 bar · capacity 1.0 m³/min. Higher power...

The lightest machine of the range for one to two chairs. A twenty-five-litre receiver, 31 kilos and an oil-free pump without a dryer.

Low-speed V-twin compressor with the biggest tank in the V30 range: horizontal 90 l tank, 2.2 kW from an ordinary socket, 1,450 rpm, 330 l/min displacement, 10 bar, 72 kg on...

The lightest low-speed V-twin in the V30 range: 20 l tank in a protective tubular frame, 2.2 kW from an ordinary socket, 1,450 rpm, 330 l/min displacement, 10 bar, 43 kg....

Two-piston 50 l compressor with the low-speed V30 pump: 1,450 rpm, 2.2 kW from an ordinary socket, 330 l/min displacement, 10 bar, 60 kg on wheels with a swivel castor....

E.65 VS in Standard version, with a 270 l air receiver and integrated dryer · 7.5 kW · pressure 10 bar · capacity 1.0 m³/min. Higher power class with a 7.5...

E.65 K Comfort version (soundproof steel enclosure), without air receiver · 7.5 kW · pressure 10 bar · capacity 1.0 m³/min. Higher power class with a 7.5 kW...

Vertical compressor with the low-speed V30 pump: vertical 50 l tank on a 52 × 41 cm footprint, 2.2 kW from an ordinary socket, 1,450 rpm, 330 l/min displacement, 10 bar, 62 kg,...

The ninety with the A29B pump: 1.5 kW on 230 V, 178 l/min at 750 rpm, 10 bar, 69 kg on castors. In stock; moulded belt guard, aftercooler, regulator; noise 93 dB Lwa and 73 dB...

The site V30: twin 2 × 11 l tanks with a low centre of gravity, tubular frame with a tray, PU foam wheels, two DN 7.2 outlets. Low-speed V-twin 1,450 rpm, 2.2 kW from an...

A medium tank size in the SFTG KSP range, an inverter compressor for a workshop with fluctuating air consumption. The 1,683 × 739 × 1,629 mm assembly weighs 326 kg, the...

Assembly on a medium-sized air receiver for a workshop or small-scale production with higher-pressure tools. Housing 1,683 × 739 × 1,629 mm, weight 326 kg, connection G ¾″,...

E.80-VARIO in Standard version, without receiver (on feet) · 7.5 kW · pressure 9 bar · capacity 0.56 – 1.5 m³/min. Vario variant E.65 / E.80 with Danfoss...

The same machine as the 25M but with an adsorption dryer. A −40 °C dew point, 43 kilos, for one to two chairs.

The middle class on a small receiver. 155 l/min for two to three chairs, 36 kilos, no dryer.

The middle class with a dryer on the small receiver. A −40 °C dew point for two to three chairs, 50 kilos.