Read about how compressors work and what parameters to consider when choosing a compressor for your workshop or operation. Article content: How do compressors work? How to proceed when choosing a compressor? Frequency of compressor use Calcula...
Flange microfilter BFS-0300
Related products

The BFS microfiltration insert is used to remove mechanical impurities and oil from compressed air. Borosilicate microfibre insert with a filtration capacity of up to 0.01 μm....

The BFP basic filter cartridge is used to remove mechanical impurities from compressed air. Acrylic fibre and cellulose liner with a filtration capacity of up to 3 μm. Working...

The BFM pre-filter insert is used to remove mechanical impurities and oil from the compressed air. Borosilicate microfibre insert with a filtration capacity of up to 0.1 μm....

The BFR dust filter insert is used to remove mechanical impurities from compressed air. Acrylic fibre and cellulose liner with a filtration capacity of up to 1 μm. Working...

The BFA microfiltration insert is used to remove mechanical impurities and oil from compressed air. Borosilicate microfibre and activated carbon liner with filtration capacity...

The BFB filter insert is used to remove the largest mechanical impurities from the compressed air. Sintered bronze insert with filtration capacity up to 15 μm. Working pressure...
Flange filters BFS-0300 - microfiltration up to 0,01 um
- filters designed to effectively remove solid impurities, oil, water, hydrocarbons, odours and vapours from compressed air
- welded carbon steel body complying with PED 97/23ES, flange connection
- operating temperature range +1.5 to +65 °C, maximum working pressure 16 bar
- filter cartridge replacement intervals - once a year or when the pressure gradient reaches 350 mbar; grade A every 6 months
- scope of delivery - filter body and filter cartridge, without condensate drain - order separately
- reference flow conditions: temperature +20 °C, working pressure 7 bar; for other conditions a correction factor must be used for calculation - please contact us
Technical parameters
Category: | Compressed air microfilters BFS |
---|---|
Version: | Microfilter |
Pressure: | 16 bar (16 atm, 232 PSI, 1,6 MPa) |
Connecting: | flange DN100 |
Dimensions: | 1340 x 560 x 1780 x 324 x 227 mm |
Certification: | ISO 8573-1 (IUTA), PED 97/23/CE |
Filtration: | 0.01 µm |
Filter insert: | BFS-0240V |
Material: | Carbon steel |
Condensate discharge: | Without release |
Number of inserts: | 2 |
Working temperature: | +1.5 / +65 °C |
Flow: | 53 l/min (3,15 m³/h, 1,8532 CFM) |
Residual oil: | <0,01 mg/m³ |
Quality class - oils: | 1 |
Quality class - solid impurities: | 1 |
Omega Air filtration - BF series
News Overload
We select articles from our advice room
Be the first who will post an article to this item!
Be the first who will post an article to this item!
Alfa and Omega from SloveniaIn the Slovenian capital, Ljubljana, there is a company specialized in compressed air treatment, production of industrial filters and filter inserts, separators or special membrane dryers and other products. Omega Air was founded in 1988 as a family business and soon secured a place in the industry. Over the years, Omega Air's workforce has also grown with increasing production and today the company employs more than 250 people. |
![]() |
![]() |
Omega products are used everywhereA wide range of applications is typical for Omega Air products. Its products are used in heavy industry as well as by private entities. Slovenia's footprint is thus noticeable in industrial sectors such as electrical, gastronomy, pharmaceuticals, moto and also in the chemical-industrial sector. However, the company's main product is special filters, which are exported all over the world. |
No greenhorn in the industryOmega Air also boasts several proprietary innovations and patents that originate in the development department. The company has also been awarded several times for its innovative solutions at the International Engineering Fair itself, which is traditionally held in Hannover, Germany. The Omega Air product range is brought to you by our air compressors company below. |
What Omega Air produces:
|
Similar products

The IHP4R stainless steel dust filter with G1 1/2" connection thread is designed to effectively remove dust, oil, water and other impurities from compressed air up to 1 um....

The IHP4R stainless steel dust filter with G3/4" connection thread is designed to effectively remove dust, oil, water and other impurities from compressed air up to 1 um....

The IHP2R stainless steel dust filter with G3/8" connection thread is designed to effectively remove dust, oil, water and other impurities from compressed air up to 1 um....

Stainless steel dust filter IHP2R with G2" connection thread designed to effectively remove dust, oil, water and other impurities from compressed air up to 1 um. Maximum working...

The IHP2R stainless steel dust filter with G1 1/4" connection thread is designed to effectively remove dust, oil, water and other impurities from compressed air up to 1 um....

The IHP4R stainless steel dust filter with G3/8" connection thread is designed to effectively remove dust, oil, water and other impurities from compressed air up to 1 um....

Stainless steel dust filter IHP1R with connection thread G1 1/4" designed to effectively remove dust, oil, water and other impurities from compressed air up to 1 um. Maximum...

The IHP1R stainless steel dust filter with G3/4" connection thread is designed to effectively remove dust, oil, water and other impurities from compressed air up to 1 um....

The AFS microfilter is used to remove the largest mechanical impurities from compressed air up to 0.01 um according to ISO 8573-1 class 1. Body with easily removable container...

The IHP2R stainless steel dust filter with G1 1/2" connection thread is designed to effectively remove dust, oil, water and other impurities from compressed air up to 1 um....

Stainless steel dust filter IHP1R with G2" connection thread designed to effectively remove dust, oil, water and other impurities from compressed air up to 1 um. Maximum working...

Stainless steel dust filter IHP4R with G1" connection thread designed to effectively remove dust, oil, water and other impurities from compressed air up to 1 um. Maximum working...

Stainless steel dust filter IHP4R with G2" connection thread designed to effectively remove dust, oil, water and other impurities from compressed air up to 1 um. Maximum working...

The IHP1R stainless steel dust filter with G3/8" connection thread is designed to effectively remove dust, oil, water and other impurities from compressed air up to 1 um....

The IHP4R stainless steel dust filter with G1/2" connection thread is designed to effectively remove dust, oil, water and other impurities from compressed air up to 1 um....

Stainless steel dust filter IHP1R with G1" connection thread designed to effectively remove dust, oil, water and other impurities from compressed air up to 1 um. Maximum working...