Hose clamps for fixing hoses, Page 9
- Worm buckles W; with pressed strip
- HTW hose clamps; with high tightening torque
- DW hose clamps; with perforated band
- BW endless belts; for individual buckle production
- Hose clamps QLW; with snap-on house
- PMW hose clamps; miniature strength design
- Hose clamps PW; strength design
- Mounting brackets KW; version with rubber insert
- Hose clamps SW; wire version
- Hose clamps PUW; suction hose PUR1
- Hose clamps FXW;extraction hoses with 0.4 to 0.75 mm wall
- FXPW hose clamps; suction hoses with wall from 1.45 mm
- Hose clamps PWD2; strength version with two screws
- Hose clamps EW; deformation version with eyelets
- Hose clamps FW; spring design smooth inside
- EGW hose clamps; deformation version with insert
- Hose clamps CBW; deformation lock design
- FBW hose clamps; spring version
- LPH press rings; low pressure design
- Hose clamp stands; practical stands
Bestsellers
PW4 51mm strength hose clamp with tightening screw located on the hinge bolt. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...
PW4 55mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...
PW4 59mm strength hose clamp with tightening screw located on the hinge bolt. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...
SW4 55mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...
PW4 73mm strength hose clamp with tightening screw located on the hinge bolt. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...
PW4 63mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...
PW4 67mm strength hose clamp with tightening screw located on the hinge bolt. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...
PW4 19mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...
Hose clamp for attaching the right-hand spiral suction hose in the range of 24-48 mm with 9 mm wide strap. Easy assembly and perfect sealing thanks to the bridging element over...
Hose endless belt with a width of 8 mm and a length of 25 m. Also included are 50 locks for custom use of individual lengths. Supplied in stainless steel. Designed for the...
LPH press ring with a diameter of 30 mm. Made of annealed steel, galvanized and yellow chromated. Assembling using the SPR 333 manual assembly machine. Prevents injury. Designed...
Hose clamp for attaching the right-hand spiral suction hose in the range of 32-52 mm with 9 mm wide strap. Easy assembly and perfect sealing thanks to the bridging element over...
Hose clamp for attaching right-hand spiral suction hose in the range 52-72 mm with 9 mm wide strap. Easy assembly and perfect sealing thanks to the bridging element over the...
LPH press ring with a diameter of 33 mm. Made of annealed steel, galvanized and yellow chromated. Assembling using the SPR 333 manual assembly machine. Prevents injury. Designed...
Screw hose clamps in material finish W4 - stainless steel AISI 304 with 12 mm wide band for hose range 16-27 mm. Manufactured according to DIN 3016. With house and tightening...
SW4 35mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...
Hose clamp designed for hose diameters 25-40 mm with easy and quick assembly of the hose clamp thanks to the snap-on house. Stainless steel strip with 9 mm wide continuous...
PW4 85mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...
Hose clamp for attaching right-hand spiral suction hose in the range of 92-112 mm with 12 mm wide tape. Easy assembly and perfect sealing thanks to the bridging element over the...
LPH press ring with a diameter of 41 mm. Made of annealed steel, galvanized and yellow chromated. Assembling using the SPR 333 manual assembly machine. Prevents injury. Designed...
PW4 103mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...
PW4 112mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...
PW4 130mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...
Screw hose clamps in material finish W4 - stainless steel AISI 304 with 12 mm wide band for hoses with a range of 50-70 mm. Manufactured according to DIN 3016. With house and...
Hose clamp for attaching right-hand spiral suction hose in the range 112-132 mm with 12 mm wide strap. Easy assembly and perfect sealing thanks to the bridging element over the...
Hose clamp for attaching right-hand spiral suction hose in the range 122-142 mm with 12 mm wide strap. Easy assembly and perfect sealing thanks to the bridging element over the...
Hose clamp for attaching right-hand spiral suction hose in the range 142-162 mm with 12 mm wide strap. Easy assembly and perfect sealing thanks to the bridging element over the...
Hose clamp for attaching right-hand spiral suction hose in the range of 192-212 mm with 12 mm wide tape. Easy assembly and perfect sealing thanks to the bridging element over...
Hose clamp designed for hose diameters 60-145 mm with easy and quick assembly of the hose clamp thanks to the snap-on house. Stainless steel strip with 9 mm wide continuous...
Hose clamp designed for hose diameters 60-170 mm with easy and quick assembly of the hose clamp thanks to the snap-on house. Stainless steel strip with 9 mm wide continuous...
PW4 187mm strength hose clamp with tightening screw located on the hinge bolt. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...
Mounting bracket KW with a diameter of 48 mm and a tape width of 25 mm. Made of W1 material - white galvanized steel compliant with RoHS directive, rubber insert resistant to...
SW4 100mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...
Hose clamp SW4 110mm fitted with two tightening screws on a hose clamp. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber hoses,...
Screw hose clamps in material finish W4 - stainless steel AISI 304 with 12 mm wide band for hose range 20-32 mm. Manufactured according to DIN 3016. With house and tightening...
SW4 260mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...
PW4 91mm strength hose clamp with tightening screw located on the hinge bolt. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...
PW4 79mm strength hose clamp with tightening screw located on the hinge bolt. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...
PW4 97mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...
SPR 333 handheld assembly machine with two interchangeable jaws with a range of 3-20mm and 10-19mm. Ensures joint cleanliness, reduces assembly time. Designed for manual, simple...